Page 1
User Manual
Distinctive Feature of each model : ITB-70 has no GPS / ITB-70G has built-in GPS
Vehicle Driving Recorder
ITB-70 / 70G User Manual
Page 2
• This product is supplementary device to bring a driver an awareness for safe driving and accident prevention, and
reference about the circumstance of an accident. So, this product and it’s recorded data can not be used to legally
judge any party’s liability of the accident.
• If the level of impact is so light even in the case of an accident, the impact senor may not recognize it and fails to
sort out the data as event le automatically. In this case, press the event button manually.
• The manufacturer shall not be liable for any damages due to the loss of data or any other malfunction occurred by
the use of this product.
• This user manual is applied to both ITB-70 and ITB-70G. If there is any sole feature corresponding to ITB-70G
only, a remark of ‘ITB-70G only’ is added on it.
<Warranty & Scope of Liability of Video Recording>
Page 3
Table of contents
01
Main features
Safety instruction – Warning
Safety instruction - Caution
Attention to SD memory card
Attention to GPS
Components
Name of the product details
Installation
Operation of the product
Installation of the PC player
How to play the video
Function keys in the PC player
How to change the user settings
How to change the time setting
How to manage the recorded les
how to update the product rmware
How to format the SD memory card
Product specications
02
04
05
06
07
08
09
10
12
14
16
20
24
26
28
30
32
34
Page 4
Main features
1. The video and audio data are continuously recorded by H.264 high eciency data compression method.
Recording coverage is wide view angle 120 degree and recording resolution is 640x480.
2. When impact of collision, lightning acceleration or sudden brake is detected by the built-in impact sensor, the
recorded data is marked as event le and stored in SD memory card.
3. If a driver needs to record any specic view and press the event button, the recorded data is also marked as
event le and stored in SD memory card.
4. 3-axis log-in data captured by the built-in impact sensor is also recorded and a driver can see and analyze it in
the PC player.
5. When the memoty capacity of SD card has been lled, the lastest data overwrite the older les and continues
to record.
6. The audio ( in-vehicle sound or noise of collision) is also recorded along with video data and playback in the
PC player. In order to protect privacy , the audio recording can be also turned o.
7. The data stored in the SD memory card can be played back easily at the computer using the iPASS BLACK PC
player program.
02
Page 5
Main features
03
8. The front-view camera lens can be tilting up to 180 degrees and record the inside of the vehicle if necessary.
9. This Product is certied by major worldwide type approvals such as CE, E11 (Europe), FCC (USA), VCCI ( Japan).
10. Compact round shape design and luxury SF coating on the product is harmonized with vehicle interior.
11. Built-in GPS ( ITB-70G only )
Built-in GPS records the driving speed and display it in the PC player. It records the driving coordinates
also and match it to the PC map.
Page 6
Safety instruction - Warning
1. Do not try to operate the product when driving.
2. Do not disassemble, repair or modify the product. This void the warranty and the manufacturer
takes no responsibility for the damage or problems to the product.
3. Do not clean the product with water or volatile solvents. This may cause the damage, re or
electrical shock to the product.
4. Use only genuine parts or accessories supplied and recommended by the manufacturer.
If not, this may cause the damage or problems to the product.
5. Ensure to connect the product into stable power source in a vehicle. ( DC 12~24V).
6. If the product is connected to the battery of the vehicle at all times, please check the battery
status regularly in order to avoid the electric discharge.
7. Do not place the product inside of a vehicle for a long time especially in the summer or
winter season. This may cause the damage or problems to the product.
04
Warning
Page 7
Safety instruction - Caution
05
1. Please remove any excessive window tinting or obstacles of windshields. This may cause
poor recording quality.
2. Please clean the lens of camera regularly.
3. If you need to re-install or change the location of the product, please ensure of the direction
and angle of the camera lens for the proper recording position and conrm its recording
status on playback.
4. Make a routine check on the position and angle of the camera lens. Especially check these
items after driving on wild road or no use for a long time.
5. Recording quality is aected by lighting condition and may be poor or distorted under the
sudden change of brightness level ( ex : right after passing through the tunnel ), no light in
the night or against the light.
6. If the product is broken by huge impact like accident or disconnected from power source, it
may stop proper operation.
Caution
Page 8
Attention to SD memory card
06
1. Check the SD Memory card regularly in order for its normal and right operation.
2. Do not remove the power source or pull out the SD Memory card from the product when recording the
data into the SD Memory card. This may cause the loss of data and damage to the SD Memory card.
3. Do not disassemble , repair or modify the SD Memory card. This may cause the loss of data and damage to
the SD Memory card.
4. Please keep the SD Memory card into the hard case if you need to carry it alone for a long time.
5. Please use recommended SD Memory cards by the manufacturer. If not, this cause the loss of data or
damage to the product.
6. Generally, a SD Memory card has limited lifetime and may be unable to store new data after certain period
of time. In such case, please purchase new SD Memory card and replace the old one.
7. Please back up any important data in other storage device like hard disk drive, CD and so on.
Page 9
Attention to GPS (ITB-70G only)
07
1. A certain amount of time (minimum 5 minutes to maximum 30 minutes) may take until the GPS reception
starts. This is the processing time of the GPS receiver to communicate with GPS satellites oating in the
sky and may vary depending on weather condition and surrounding circumstances.
2. Even though the GPS reception signal is unstable, it is nothing to do with the basic function of the product
and you can continue to record normally.
3. Please make sure to keep the GPS receiver fully exposed through the windshield and avoid to install the
product to any position like tinted part of windshield.
4. If the camera lens tilts to backward for in-vehicle recording, the GPS reception may become poor. (The
built-in GPS receiver faces down to the ground and may be unstable to communicate with GPS satellite.)
Please revert back the direction of camera lens to the front after in-vehicle recording.
5. Do not use with other products that generate electromagnetic waves. This may interfere with a GPS and
reduce the performance of GPS reception.
Page 10
08
Main unit Cable holder
Power cable
Constant power source
connection cable
(Option)
Mounting cradle
SD memory card
SDHC
SD card reader
(Option)
SD/MMC
Adhesive tape
(spare)
3M
3M
3M
3M
User manual
Components
User Manual
Distinctive Feature of each model : ITB-70 has no GPS / ITB-70G has built-in GPS
Vehicle Driving Recorder
ITB-70 / 70G User Manual
Page 11
①
②
③
④
⑤
⑥
⑦
⑧ ⑨
09
DC IN
REC
MIC
DC IN
O
P
E
N
D
C
IN
Name of the product details
①
Power-on LED Indicator
( common use for Event-recording,
formatting and GPS status indicator
button)
②
Microphone
③
Sliding guide rail to mounting Cradle
④
SD memory card protection cover
⑤
Power connection port
⑥
SD memory card slot
⑦
Camera lens
⑧
Recording status LED Indicator
⑨
Camera direction alignment guide
Page 12
Installation
10
REC
3. Remove the protection lm attached on the camera lens.
2. Put the mounting cradle on the main unit and push forward it as shown on the
left picture. You can hear the click sound if the mounting cradle xed properly.
4. Remove the lm of the adhesive tape on the cradle and take a proper position on the windshield temporarily as shown on the left picture. If it is ne for
recording, x the cradle tightly with more pressure.
1. Open the SD memory card protection cover and insert the SD memory card
into the slot. Then close the cover.
Page 13
Installation
11
REC
5. Align the direction of camera lens to the front referring to the arrow mark
printed on the main unit.
6. Connect the power cable to the cigarette lighter jack of the vehicle.
7. Arrange the cable with cable holders. The installation is completed.
Page 14
12
REC
REC
R
E
C
REC
1. Turn on the power of a vehicle, the POWER LED turns on. The POWER LED also
indicates the status of the GPS connection for ITB-70G and it will blink with
2 seconds interval and stop to blink once the GPS is successfully connected.
2. 3 scales beep sound will be heard after 10 seconds since the POWER LED turns
on, and the product starts recording. The video and audio data are continuously
recorded and stored into SD memory card.
3. When impact of collision, lightning acceleration or sudden brake is detected
by the built-in impact sensor, the recorded data is marked as event le and
stored in SD memory card.
4. If a driver needs to record any specic view and press the event button, the
recorded data is also marked as event le and stored in SD memory card.
Operation of the product
Page 15
Insert the SD memory card
Type of beep Root cause
Single scale 3 times beep
Trouble shooting
• Table of error beeps
13
REC
5. When turning o the power of a vehicle, the product process the last data for
5~10 seconds and turns o with the 3 scale beep sound. Please do not remove
the SD memory card before you hear 3 scale beep sound.
Operation of the product
4 scales beep
( repeatedly )
2 scales beep
(one time after power on)
Format the SD memory card or replace with new one
Contact the local service provider
No SD memory card detected in the SD
memory card slot
SD memory card related error
Error in the time management of the
main unit
Page 16
You can play back the recorded video and audio data on the PC via PC player supplied by the manufacturer. This PC player
program is most optimized to run in Windows XP (32 bit) or Windows Vista (32 bit).
14
S
D
/
M
M
C
Installation of the PC player
1. Pull out the SD memory card from the main unit and insert it into the
memory card reader as shown on the left picture. Then put the memory
card reader into the USB port of the PC.
2. Search the USB disc and double click the installer le named by
ITBPCPlayuerSetup.exe.
Page 17
15
Installation of the PC player
3. Click the start button and the installation will start.
4. If the installation is nished, click the nish button.
5. If shortcut icon appears on desktop screen, the installation is
completed.
Page 18
16
S
D
/
M
M
C
How to play the Video
1. Pull out the SD memory card from the main unit and insert it into
the memory card reader as shown on the left picture. Then put the
memory card reader into the USB port of the PC.
2. Double-click the shortcut icon of the PC player.
3. Then, the PC player pops up.
Page 19
17
How to play the Video
4. Select the appropriate SD memory card and click the OK button.
5. All les in the SD memory card will be loaded on the right window
and playback one by one in the sequential order of recording date and
time (older comes rst ).
6. Just press the le directly if you want to move another le.
Page 20
18
How to play the Video
7. The graph shown under the playback screen means the degree of
X axis ( front and back), Y axis (left and right), and Z axis ( up and
down) impacts when an event occurs.
8. The driving speed and GPS status displays on the top of the playback
screen. (ITB-70G only)
※
If the level of impact is so light even in the case of an accident, the
impact senor may not recognize it and fails to sort out the data as
event le automatically. In this case, press the event button manually.
Left &
Right
Up & Down
1. X : Red
2. Y : Green
3. Z : Blue
Z
Front &
Back
Y
X
Page 21
• Please note that the PC must be connected to Internet in order to use
internet PC map service.
19
How to play the Video
9. Built-in GPS records the driving coordinates and match it to the
internet PC map. (ITEB-70G only)
※
Version of the PC player will display if you press the right button
of the mouse while the PC player runs on the PC.
• PC map window can be closed or open pressing the icon.
Page 22
Function keys in the PC player
20
0
$
AMP
SD
!
!
!
!
!
!
!
DATE / TIME
SIZE
FILE NAME
2009-03-25 19:45
11MB
20090325_194518
2009-03-25 19:46
11MB
20090325_194618
2009-03-25 19:47
11MB
20090325_194718
2009-03-25 19:48
11MB
20090325_194818
2009-03-25 19:49
11MB
20090325_194918
2009-03-25 19:50
11MB
20090325_195018
2009-03-25 19:51
11MB
20090325_195118
2009-03-25 19:52
11MB
20090325_195218
?
km
Hour
128
Page 23
Function keys in the PC player
Icon
Description
21
Go to previous or next le
Jump to 10 seconds previous or after image
Play
Pause
Play speed control
( 5 steps- frame by frame, x0.1 slow, x 0.5 slow, x1 normal, x2 fast)
Video brightness control
180 degree rotate for reversed images
Image capture
Audio volume control
Audio amplier ( maximize the low level of audio volume)
Page 24
22
Function keys in the PC player
0
$
AMP
SD
!
!
!
!
!
!
!
DATE / TIME
SIZE
FILE NAME
2009-03-25 19:45
11MB
20090325_194518
2009-03-25 19:46
11MB
20090325_194618
2009-03-25 19:47
11MB
20090325_194718
2009-03-25 19:48
11MB
20090325_194818
2009-03-25 19:49
11MB
20090325_194918
2009-03-25 19:50
11MB
20090325_195018
2009-03-25 19:51
11MB
20090325_195118
2009-03-25 19:52
11MB
20090325_195218
?
km
Hour
128
Page 25
Icon
Description
23
Select the SD memory card
Open the le from the PC
Delete the le (one by one)
Save the le (one by one)
Save all event les marked event icon
Setting
- For more details, please refer to next page
Function keys in the PC player
Page 26
How to change the user settings
You can control the following parameters on the setting menu in the PC player.
24
I
llumination control :
I
mpact sensor sensitivity :
Capture image format
Audio recording :
Recording quality :
Time Zone :
OFF
0.4
High 24fps
Standard
(GMT+01:00) Belgrade, Bratislava, Budapest, Ljublja...
User Settings
OK Cancel
You can change the default
setting values in the menu.
Press the value Window and
select the value you want to
set.
Page 27
1 minute
11MB
6 hours
2 minutes
14MB
9 hours
1 minute
11MB
6 hours
Item Option
Recording quality
(frame per second)
High
(24 fps)
Standard
(30 fps)
Standard
(15 fps)
Length of a le
Size of a le
Recording time
(e.g.: 4G)
25
How to change the user settings
- Route for le save : Select or change the PC folder where you want to save the le.
- Capture image format : BMP or JPEG
- Audio recording : ON or OFF
- Impact sensor sensitivity : (sensitive) 0.4>0.6>0.8>1.0 (dull) OFF (auto event detection turns o)
- Illumination control : Standard or Bright (‘Bright’ is recommendable to record the better image in the night.)
- Recording quality : You can change the recording quality changing the fps(frame per second).
- Time zone : Please refer to next page for more details.
Page 28
How to change the time setting
If you need to change the time setting comparing the GMT world time zone or local summer time, you can change the time setting in the
user settings menu as follows.
1. Go to the User Settings menu in the PC player and
you can nd the sub-title, ‘Time Zone”.
2. Please click the block which lists the world wide
time zone.
3. Please select the time zone you want to set.
4. Then, press the OK button.
26
I
llumination control :
I
mpact sensor sensitivity :
Capture image format
Audio recording :
Recording quality :
Time Zone :
OFF
Set the Time zone.
0.4
High 24fps
Standard
(GMT+01:00) Belgrade, Bratislava, Budapest, Ljublja...
User Settings
(GMT+01:00) Belgrade, Bratislava, Budapest, Ljublja...
(GMT+01:00) Brussels,Copenhagen, Madrid, Paris
(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb
(GMT+01:00) West Central Africa
(GMT+02:00) Amman
(GMT+02:00) Athens, Bucharest, Istanbul
Page 29
How to change the time setting
01 0 +01 +02 +03 +04 +05 +06 +07 +08 +09 +10 +11 +12 12 11 10 09 08 07 06 05 04 03 02
EASTWEST WEST
International Date Line
International Date Line
International Date Line
<World Time Zone>
GMT
27
Page 30
This products records video/audio with always-recording mode and the recorded les are stored at SD memory card as per the resolution
of User Setting Menu. The list of les stored is shown as per sequential order of recorded date and time. The event recording les, out of all
recorded les, which record events such as impact sensing and/or manual-recording, should be easily identied by the event icon to
be placed in front of the le name.
How to manage the recorded les
1. Ordinary recording les and event recording les are stored together as per the time sequence of recording from the
very beginning of recording start until SD memory capacity becomes full and the le list window will show the les
from the oldest.
Event recording les
Ordinary recording les
Delete the ordinary
recording les and
Event recording les
are kept
Newer ordinary
recording les
2. Once the memory capacity is full, event recording les are kept and newer ordinary recording les will be sequentially stores.
28
Page 31
How to manage the recorded les
3. In case that all ordinary recording les are deleted and only the event recording les are left, the event recording les are also
deleted from the oldest after remaining 30 minutes of memory capacity for newer video recording. Thereafter, by repeating the
deletion of older les and the recording of newer les, it records the newest 30 minutes of video.
The le is event markedWithin First 5 seconds
The previous recorded
les is event-marked
together.
The post recorded
les is event-marked
together.
Within last 5 seconds
Newest 30 minutes of
video recording
4. If you do not manage the old event recording les for a long time and thereafter the recording mode is changed to accept
only 30 minutes of recording for the newest video/audio, you are unable to store the les which are over 30 minutes and it
may cause you an inconvenience. Please delete periodically the old les and the event les which are not necessary to keep
for a long term.
In case the event is happened within 5 seconds since the recording starts, the previous recorded le is event marked
together in order to show the before-event situation. Also, in case the event is happened in 5 seconds prior to the recording
ends, the post recorded le is event-marked in order to show the after-event situation.
29
Page 32
How to update the product rmware
The rmware of the product can be updated easily if any new rmware is released for the purpose of improvement and / or
correction of the product rmware.
1. Download the new rmware from the web site of local service provider.
2. Unzip the le and you can nd the le named “app.bin” from unzipped
folder.
3. Pull out the SD memory card from the main unit and insert it into the
memory card reader as shown on the left picture. Then put the memory
card reader into the USB port of the PC.
4. The SD memory card will be detected as USB disc.
S
D
/
M
M
C
30
Page 33
How to update the product rmware
5. Please copy the “app.bin” le into the root directory of SD memory card.
- Please insert the SD memory card into the PC and run the PC player.
- Push the right button on the PC mouse and click the version of rmware.
6. Pull out the SD memory card from the PC and insert it into the product. Turn
on the power and then rmware update will start automatically with the starting
beep sound. It will take 10~15 seconds to complete the rmware update and
the REC button will blink while update is in progress. If the update is completed,
the product will boot again and start to record with 3 scale beep sounds.
REC
• Please do not remove the SD memory card in the middle of rmware update. It may cause damage to the product.
• You can nd the rmware version of the product as follows.
31
Page 34
How to format the SD memory card- method 1
Generally, a SD memory card has limited lifetime and may be unable to store new data after certain period of time. In order to extend its
lifetime, we recommend you to format the SD memory card periodically. The recommendable format cycle is 2 times per week and the
method of format is as follows.
1.Pull out the SD memory card from the main unit and insert it into the memory
card reader as shown on the left picture. Then put the memory card reader
into the USB port of the PC.
2. The SD memory card will be detected as USB disc.
3. Please select the USB disc and push the right button of the PC mouse. The
menu screen will pop up and please select the ‘format’.
4. Before starting the format, please select the allocation size referring to
memory capacity of SD memory card. (e.g. : 4G - 4096 Byte , 8G - 32 KB )
Click the start icon and the format will start.
S
D
/
M
M
C
• Please do not select the quick format.
32
Page 35
1. Press the REC button longer than 5 seconds then format will start with
short beep sound.
2. When formatting, 3 single scale beep will sound.
3. If the format is completed, the beep sound will stop and the product will
re-boot automatically.
How to format the SD memory card- method 2
REC
REC
REC
• Once the format is completed, all data in SD memory card will be deleted. So, please make sure that all necessary les
to keep have to be backed up in another storage device.
• Even though SD memory card is formatted, all user setting values will remain same as before without change.
33
Page 36
CMOS
120 degree / 0.3 M il pixels
0.9 LUX
H.264
Built-in
640 x 480 ( VGA)
high(24fp s) / Standa rd(30fps) / Standard(15fps)
12 ~ 24v
92mm(W) x 42mm(H)
-20 ~ 70℃
YES(Built-in)
85g
Ty pe o f sensor
Cov er ag e / Pi xe ls
Minimum I ll um in ation
Data co mp r ession
3 axi s im pa c t s ensor
Resolu ti on
Selecta bl e fp s
GPS
Pow er i nput
Size
Opera ti ng t empera tu re
We ig ht
Specications
NO
80g
Camera
ITB-70 ITB-70G
Items
Recording
Others
34
Page 37
Distinctive Feature of each model : ITB-70 has no GPS / ITB-70G has built-in GPS
Vehicle Driving Recorder
REV.100727-1
Loading...