Itron NIC503 Users Manual

I-210+ and I-210+c NIC Labeling

Integrator's Guide

Silver Spring Networks

SSN - I-210+ NIC FCC Labeling 070614.doc

I-210+ and I-210+c NIC Labeling
Integrator's Guide

1 Introduction

The Silver Spring Networks I-210+ Network Interface Card (NIC) is a FCC Part 15.247 compliant
device that enables communication between Silver Spring Networks AMI network and the I-210+
and I-210+c family of meters. The NIC transmits in the 902 to 928 MHz, ISM band and transfers
data from utility meter to Silver Spring Networks Relays and Gateways.

2 NIC Labeling

The SSN I-210+ NIC has two labels relevant to meter assembly – the FCC & Part Number label
and the SSN NIC Address label. Both labels are located on the top side of the NIC PCA. The
barcode format is Code 3 of 9.

Figure 1 is an example of the FCC ID label that can be found in the location indicated in Figure

3. The size of the label is 1.5” x 1.0” inches. The barcode format is Code 3 of 9.

Figure 1 – FCC & Part Number Label for NIC PCA

SSN PN 340-040102

FCC ID: OWS-NIC503 IC: 5975A-NIC503

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept an
interference received, including interference that
may cause undesired operation.
996-000015A

Figure 2 is an example of the NIC address label that can be found in the location indicated in
Figure 3. The barcode format is Code 3 of 9.

Figure 2 – NIC Address Label for NIC PCA

1234567890123456

y

Silver Spring Networks

2