User Manual
AS2000 Plus Portable GPS Tracker
(For Vehicle/Container/Boat/ Personal)
1. Product Overview
GPS TRACKER AS2000 plus is the combination of GSM and GPS technology, it uses
industrial-grade fireproof material, 6 18MM × 3MM strong magnets , IPX-5 waterproof
level, built-in 8000MAH high-capacity battery, long standby 100 days, Magnetic free
installation design, easy to use.
Application:
● car rental / small fleet management
● Outdoor Activities
● Child / Elderly / Disabled / valuables custody
● Personal Safety
● Personnel Management
● tracking
● Animal Protection and grazing
For your safety:
In order to realize the full functions of this product, please read this manual carefully
before starting to use the product.
1. This product can only be maintained and repaired by qualified
professional service personnel. If you detach this product for
maintenance or repair, your warranty will be invalidated.
2. When connecting the other devices, read carefully their instruction
manuals, so as to carry out correct installation; do not connect
incompatible device.
3. Please use genuine original parts and qualified batteries and
peripheral equipments, so as to avoid damage to this product.
4. As this product is a high-tech product, please read carefully this
manual before starting to use the product, so as to avoid
inappropriate operation.
5. Drivers should not operate this product while driving a vehicle,
thereby, affecting safe driving.
6. This product can work properly only when GSM communication is
in good condition.
7. Please reduce electromagnetic wave interference to the product;
and use it properly.
8. GPS communication is liable to be affected by environmental
shielding; may fail to carry out positioning during certain
circumstances. It will resume the positioning function as soon as it
leaves the shielding environment. This is normal. Please do not worry
when encountering such problem.
9. Each signal sent out from the system will be confirmed for
successful transmission in the base station of the mobile operator.
However, if system stoppage occurs or if the mobile telephone is
preset to a switch off state by the customer, it cannot ensure
successful transmission.
1
0.
For safety reason, do not tell the other people your GTLT3 mobile
number, without taking precautions. Otherwise, your privacy may be
compromised along with other safety problem.
2. Specification
Item Details
Charging Voltage DC 5V/1000mA (MICRO USB)
Built in battery 10000 mAh (3.7V)
Size 131 mm × 72 mm × 20mm
Weight 300g (including battery)
Operating
temperature
-20° to 55° C
Operating Humidity 5% to 95% Non-condensing
GSM Chip Quad Band GSM 850/900/1800/1900Mhz
GPS Chip UBLOX7020
GPS sensitivity --162Db
GPS frequency L1, 1575.42 MHz
C / A code 1.023 MHz chip rate
Channel 56 channel all-in-view tracking
Location Accuracy 10 meters, 2D RMS
Speed Accuracy 0.1 m/s
Time Accuracy 1 microsecond time synchronization of satellite time
Default Data WGS-84
Updated Time average 0.1 sec
Hot Start Average 1 sec.
Warm Start average30 sec.
Cold Start Average 32 sec.
Maximum Height 18,000 meters (60,000 feet) max.
Maximum Speed 515 meters/second (1000 knots) max.
Maximum
Acceleration
Less than 4g
Instantaneous
displacement
20 m/sec
Stand by time 100 days
LED 3 LED lights display the charge, GPS, GSM status
Bottom SOS emergency button
3. Installation:
3.1 Product part list
● 5V 1000MA charger
● Charging Cable
● User guide and warranty card
● GPS tracker AS2000 plus main unit
3.2 Charging
First charge, please charge more than 12 hours, please use the original charger and
battery.
Note:
(1) This product contains a chemical composition batteries, please do not bump, stab it
into the fire.
(2) Please charge to ensure that equipment is working properly.
3.3 Precaution before Installation
1 Check if all the parts are included.
2
Prepare a SIM card for GSM communication. Use some other
mobile phone to confirm that the PIN code has not been set and that
it can dial out and receive telephone calls and SMS without
problem.
3
Before install the SIM card; make sure to cut off power from the
GPS Tracker unit. The correct installation method is to push the
tray completely into the GPS Tracker unit, until you feel it is hooked
by something.
4 Find a suitable place inside the car for installing the unit.
Concealed installation for avoid the thieves damage
Avoid install together with the RF source, such as reversing radar,
alarm and other vehicle communication equipment.
Can use ribbon or wide sponge strength double-faced adhesive
stick to fix.
Equipment with GSM antenna and GPS antenna, installation shall
ensure that face up (skyward), and above no metal barrier shield,
suggest installation position:
Front windshield decorative below the covert,
Front panel (skin for non-metal material) around the shadow
Rear window below decorative
5
Check if all the wiring has been connected correctly; then connect
the GPS Tracker unit to the power supply.
6
We don't provide the SIM card
3.4 Description of AS2000 Plus LED :
LED State Description
Red LED--- indicate charge sate
State Means
Always On Battery Charging/work properly
Off Battery Charging finished or device power off
Blue LED--- indicate the GPS signal state
State Means
Flash fast Searching signal
Always on Working and has located
Off Device sleep or device power off
Yellow LED--- indicate the GSM signal state
4. Important Notice:
1. This tracker have two work mode which is SMS and GPRS Mode. SMS mode is for off line
tracking by Mobile phone.
GPRS Mode is for on line tracking by computer and mobile phone .
2. Default password 0000
3. Please unlock the SIM card in your mobile phone first if your SIM card has Pin code.
4. A1X and A1 use Micro SIM card
5. Locate by Phone call
You can use your mobile phone, call the gps tracker, after get through, then hang up.
GPS tracker will send you location report like below to your mobile phone, click the link you will
see the address on google map.
http://maps.google.com/maps?q=+22.75042,+114.23867 Date:2016-6-4 Time:1:35
ID:8160578660 STATE:Phone ACC OFF Fix:A Speed:0KM/H Bat:5
6. Locate by SMS command
Request location with coordinates
Command: 666+ user password
eg: 6660000
Reply: when the tracker receive the command, then will send the position with longitude and
latitude
Request location with Google map URL link
Command : 669+ user password
Eg: 6690000
Command: Reply : When the tracker receive the command, tracker will send a Google link to the
sender
State Means
Flash fast GSM/GPRS initialization
Always on GSM/GPRS Working normal
Off Device sleep or device power off
7. Locate by 900D web based tracking software .
1. First you need to Set Access Point Name (APN)
Command1： 803+user password+space+APN
E.g：8030000 CMNET
Command2 : 803+user password+space+APN+space+APN user name+space+APN Password
Reply: SET GPRS APN OK
In the example APN is CMNET,Which is China mobile APN.
APN is Access Point Network, each GSM operator has a unique APN name, please contact your
operator to get correct GPRS APN info.
2. Please register the GPS tracker on web platform www1.igpstracking.net first, then you
can see on the ios andriod app "itracksafe".
You can search "itracksafe" from Google play store or apple shop to download the mobile
application.
Or Scan below QR code to download.
3. Steps to register on http://www.igpstracking.net/
We have pasted user name and password on packing box, enter the user name and password we
provided. After log in, please go to “User Center-Asset Manage”, click “Add”
Asset Name: Define by yourself; you can enter A-Z number or Numeric
Device ID: On the GPS tracker cover , you can find the “ID”.
Very Important Note: Asset name and device ID must be unique on the software, you can add
once only, you need to delete it from database before adding it again.
Create time&Activation time: Do not choose.
Expiry time: Define via yourself.
Forwarding type: Null
SIM card: the SIM card phone number you put in MT-1 or any number.
Asset Password: define by yourself.
Click "Submit", and then you add the GPS tracker MT-1 successfully on the software 900D.
Wait few seconds, and you will see the GPS Tracker online icon on software
Put a check mark on the device, and right click, you will see the menu as below picture. Now you
can track online.
Attention: For 900D GPS Software, "Monitor" and "Asset Name" must be checked till the
font becomes blue, then the GPS tracker will update location automatically on map.Like
below picture:
8. SMS command list
8.1. Set Controller phone number
Command: controller phone number+ user password +space+Sequence number (1-3)
Eg: 158111122220000 1
Reply : SET USER NUMBER 1 OK.
Eg: 168111122220000 2
Reply : SET USER NUMBER 2 OK
Eg: 178111122220000 3
Reply : SET USER NUMBER 3 OK
Note: 1. Tracker can have three pre-saved number
2. New Number can cover the old number
3. No pre-saved number also can control the tracker, but alarm information only to pre-saved
number
8.2. Work Mode Exchange :
SMS Mode Command：700+ user password
Eg: 7000000
Reply: SET MODE OK, CURRENT MODE: SMS
GPRS Mode Command：710+ user password
Eg: 7100000
Reply: SET MODE OK, CURRENT MODE: GPRS
8.3. Change user password
Command: 777+new password +old password (4 figures)
Eg: 77712340000
Reply: SET USER PASSWORD OK
8.4. Command Get Daily report:
Command : 665+ user password+HHMM
Example：66500001022
Reply：SET DAILY REPORT OK
Note: HH stands for hour with defined range of [00, 23]. MM stands for minute with defined
range of [00, 59].
Close daily report function: 665+password+OFF（Default）
Example：6650000OFF
Reply：SET DAILY REPORT OFF
8.5.Geo- Fence
Turn On Geo-fence
Command: 211+ password
Eg: 2110000
Reply: GEO-FENCE ON
Set Geo Fence Command: 005+user password+Space+R
E.g: 0050000 1000
Reply: GEOFENCE ON
R=Geo-fence radius, in the unit of meter, for accuracy reason, better more than 1000meter.
1000 means geo-fence radius is 1000meter
Turn geo-fence off
Command: 210+ password
Eg: 2100000
Reply: GEO-FENCE OFF
8.6. Battery low voltage alert
While device detect internal battery is low power, it will send coordinate message with
STATE:LOW P OWER
8.7. Alert while power off(Available for MT1 MT1C MT1X MT1Z A1 A1X)
Open the power off alert Command: 011 + user password
eg: 0110000
Reply: POWER ALARM ON
Close the power off alert Command: 010 + user password
eg: 0100000
Reply: POWER ALARM OFF
8.8. Power cut(Available for MT1C MT1X A1X only)
Cut power: 940+password
Eg: 9400000
Enable power: 941+password
Eg:9410000
8.9. Time Zone
Command: 896 + user password + D + NN
Eg: 8960000E08
Reply : TIME ZONE SET OK,CURRENT：E8.
Note : D takes E or W to indicate east or west time zone respectively. N takes a 2-digit number (1-12)
to indicate time zone
Number.
8.10. Over speed Alarm
Command : 122+user password+space+X
Eg: 1220000 120
Reply: SET RATE LIMIT:120
Close command : 1220000 0
Note : X is speed benchmark value, which is an integral number. unit is KM/H with defined domain
of [0, 999].
8.11. Set Defence Alarm ON/OFF
Set Up Defence：712+password
Eg：7120000
Reply：SF OK
Set Down Defence：713+password
Eg： 7130000
Reply：CF OK
8.13. Set ACC alarm(available for MT1 MT1C MT1X MT1Z A1X)
Turn on acc alarm SMS: 886+user password
Eg: 8860000
Turn off acc alarm SMS: 887+user password
Eg: 8870000
Turn on acc alarm phone call: 888+user password
Eg: 8880000
Turn off acc alarm phone call: 889+user password
Eg: 8890000
8.14. Sleep Mode:
Turn on sleep mode:
SLEEP+user password+space+X
X means sleep time, from 1-720, in the unit of minute. If device not receive any command or
move at the X time you set, device will close GPS,GSM module, and be in power saving mode.
Eg：SLEEP0000 1
Reply：SET OK
Turn off sleep mode:
SLEEP+user password+space+0
Eg：SLEEP0000 0
Reply：SET OK
8.15. Voice monitoring(Available for MT1X only)
Command:66
Reply:set ok
Description:
You need to set admin number first, then send 66 command from admin number to the gps tracker,
after receiving the command from admin number, gps track will call admin number automatically
to realize the voice monitoring function.
8.16. Set Access Point Name (APN)
Command1： 803+user password+space+APN
eg：8030000 CMNET
Command2 : 803+user password+space+APN+space+APN user name+space+APN Password
Reply: SET GPRS APN OK
APN is Access Point Network, each GSM operator has a unique APN name, please contact your
operator to get correct GPRS APN info.
8.17. Set server IP address and Port
Command： 804+user password+space+IP+space+Port
Eg: 8040000 58.64.205.22 8000
Reply: SET SERVER IP AND PORT OK
Remark: we have two server.
If you log in from www1.igpstracking.net, server ip is 58.64.205.22, port 8000
If you log in from 900d.igpstracking.net, server ip is 58.64.205.24, port 8000
8.18. Set Data upload interval time
Command：805+user password+Space+X
Eg： 8050000 20
Reply: SET OK
Device will upload location to platform every 20 seconds when car acc is on.
Command：809+user password+Space+X
X is the location upload interval when car acc off, in the unit of seconds.
Eg： 8090000 60
Reply: SET OK
Device will upload location to platform every 20 seconds when car acc is off.
Note : X is mean interval time, the unit is seconds，the wide is 【1，1800】
We suggest X be no more than 480 seconds to avoid gprs traffic jam.
Specail Command :
1、Reset Command : FORMAT
2、Restart Command CQ
3、Read the current setup information Command: CXZT
9. Troubleshooting
1/ Why the GPS tracker can not come online on itrac gps tracker ios andriod app
"itracksafe"
Answer: please register the GPS tracker on web platform www1.igpstracking.net first, then you
can see on the itracsafe app.
2/ Why the GPS tracker shows "unactive" on www1.igpstracking.net
Answer: please make sure you set the APN correct.
APN is Acess Point Network , each GSM operator has their own unique APN, kindly contact your
sim card provider for their APN and set the APN according to user manual please.
3/ Why the GPS tracker led light is off?
Answer: please connect gps tracker with external power to charge the built in battery for 5-7 hours,
then try again.
4/ Why it said "log in fail" on on itrac gps tracker ios andriod app "itracksafe"
Answer: Kindly choose the correct server, we have two server, please choose 58.64.205.22,
default is null.
5/ Why the GPS tracker can not come online after i set IP, Port APN
Answer: send sms command 7100000 switch gps tracker to GPRS mode please.
Thanks for using our products, if you cannot solve the problem by yourself, please contact our
technical support team by writing an E-Mail service@i-trac.cn to us. We will be pleased to help
you.
Loading...