PRODUCTS SPECIFICATION Version1.4
Custom Approval Section
Custom Name
Department
Approval
Date
：
prepare
check
approve
LiaojL
2019.08.29
RW10BX-37P规格书
RW10BX-37P Specification
IEEE 802.11b/g/n 1T1R Module
Add.: Room 1302, Block A, Building 4，Huangge Road, Longgang District, Shenzhen City，Guangdong Province, China
Iton Technology Corp.
Change Records
Change the table
Change NO.
Date
Subject And Reason
Version NO.
Responser
1
27-Nov-2017
Initial
V1.0
Liaojl
2
15-Dec-2017
Module definition
V1.1
Liaojl
3
21-Mar-2018
Modify the pin definition
V1.2
Liaojl
4
10-Dec-2018
Modify module briefly
V1.3
Liaojl
5
29-Dec-2018
Modify Frequency Band
V1.4
Liaojl
PRODUCTS SPECIFICATION RW10BX-37P
PAGE2OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
CATALOG
Change Records.....................................................................................................................2
1.General Description............................................................................................................4
2.Block Diagra.......................................................................................................................4
2.1.Functional Block Diagram.........................................................................................4
2.2.WIFI Application Diagram........................................................................................ 4
2.3.Power Supply Application Diagram.......................................................................... 5
3.FEATURE.......................................................................................................................... 5
3.1 General.......................................................................................................................5
3.2 Standards Supported..................................................................................................5
3.3 WLAN MAC Features.............................................................................................. 5
3.4 WLAN PHY Features............................................................................................... 6
4.WLAN Product Specification............................................................................................ 6
5.Size Of Module Graph....................................................................................................... 7
5.1 Physical Map............................................................................................................. 7
5.2 Machine Size Map And Pin Definition.....................................................................8
5.3 Pin Definition............................................................................................................ 8
6.RF Specifications................................................................................................................9
6.1Receiver RF Specifications........................................................................................9
6.2 Transmitter RF Specifications................................................................................ 10
7.Order Information.............................................................................................................12
8.Packaging Information..................................................................................................... 12
PAGE3OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
1.General Description
■ I TON RW10BX-37P is a highly integrated single-chip low power 802.11n Wireless
LAN (WLAN) network controller. It combines an ARM-CM4 MCU, WLAN MAC, a
1T1R capable WLAN baseband, and RF in a single chip. It also provides a bunch of
configurable GPIOs which are configured as digital peripherals for different applications
and control usage.
■I TON RW10BX-37P integrates internal memories for complete WIFI protocol
functions. The embedded memory configuration also provides simple application
developments.
2.Block Diagra
2.1.Functional Block Diagram
2.2.WIFI Application Diagram
PAGE4OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
2.3.Power Supply Application Diagram
3.FEATURE
3.1 General
CMOS MAC, Baseband PHY, and RF in a single chip for 802.11b/g/n compatible WLAN
Complete 802.11n solution for 2.4GHz band
72.2Mbps receive PHY rate and 72.2Mbps transmit PHY rate using 20MHz bandwidth
Compatible with 802.11n specification
Backward compatible with 802.11b/g devices while operating in 802.11n mode
3.2 Standards Supported
802.11b/g/n compatible WLAN
802.11e QoS Enhancement (WMM)
802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication services
WIFI WPS support
WIFI Direct support
Light Weight TCP/IP protocol
3.3 WLAN MAC Features
Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)
Low latency immediate High-Throughput Block Acknowledgement (HT-BA)
Long NAV for media reservation with CF-End for NAV release
PHY-level spoofing to enhance legacy compatibility
Power saving mechanism
PAGE5OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
Dimension
L*W*H :19.8mm（±0.15mm）*14.7mm（±0.15mm）*2.3mm（±0.15mm）
Chip-set
RTL8710BX
Standard
IEEE802.11n;IEEE802.11g;IEEE802.11b;
Modulation Type
CCK 、OFDM(16-QAM)
Frequency Band
2400~2483.5MHz
Interface
UART、I2C、PWM
Spread Spectrum
DSSS
Transmission Distance
Indoor up to 100m, outdoor up to 300m(limited in an
environment)
Data Security
64/128bit WEP,
WPA/WPA2,
Transmit Power
2.4G:
11b:16±2dBm,
11g:14±2dBm,
11n HT20 :14±2dBm;
3.4 WLAN PHY Features
802.11n OFDM
One Transmit and one Receive path (1T1R)
20MHz bandwidth transmission
Short Guard Interval (400ns)
DSSS with DBPSK and DQPSK, CCK modulation with long and short preamble
OFDM with BPSK, QPSK, 16QAM, and 640QAM modulation. Convolutional Coding Rate: 1/2,
2/3, 3/4, and 5/6
Maximum data rate 54Mbps in 802.11g and 72.2Mbps in 802.11n
Fast receiver Automatic Gin Contro(AGC)
4.WLAN Product Specification
PAGE6OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
Rx Sensitivity
11n HT20 MCS7:-71dBm@10% PER
11g 54M:-75dBm@10% PER
11b 11M:-88dBm@8% PER
Data Rate
802.11b[11,5.5,2 and 1Mbps]
802.11g[54,48,36,24,18,12,9&6Mbps]
802.11n(20MHz):up to 72Mbps
Clock
2.4GHz :±20 ppm
Ambient Temperature
-20℃~85℃
Storage Temperature
-55℃~125℃
Antenna
internal PF or external PF
Operation System
windows OS, Linux
Operation Voltage
3.3V DC (±0.3V) ,500mA,200mv under.
5.Size Of Module Graph
5.1 Physical Map
PAGE7OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
Pin
Name
Description
1
\
\
2
\
\
3
GND
Ground
4
NC
NC
5
VDD33
3.3V power supply
6
NC
NC
7
GPIOA_8
GPIOA_8
8
GPIOA_11
GPIOA_11
9
GPIOA_5
GPIOA_5.Multiplexed with PWM4(Pulse-Width Modulation)
10
NC
NC
11
NC
NC
12
NC
NC
13
NC
NC
14
GND
Ground
5.2 Machine Size Map And Pin Definition
5.3 Pin Definition
PAGE8OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
15
NC
NC
16
NC
NC
17
NC
NC
18
NC
NC
19
NC
NC
20
NC
NC
21
NC
NC
22
GPIOA_23/Uart0_TXD
GPIOA_23.Multiplexed with UART0_TX (send data)
23
GPIOA_18/Uart0_RXD
GPIOA_18.Multiplexed withUART0_RX(Receive data)
24
GND
Ground
25
NC
NC
26
NC
NC
27
GPIOA_22/U0RTS
UART 0 RTS(Request To send) .Multiplexed with GPIOA_22
28
GPIOA_19/U0CTS
UART 0 CTS(Clear TO send) .Multiplexed with GPIOA_19
29
GPIOA_12/PWM3
GPIOA_12.Multiplexed with PWM3(Pulse-Width Modulation)
30
GPIOA_0/PWM2
GPIOA_0 .Multiplexed with PWM2 (Pulse-Width Modulation)
31
GPIOA_14/SWD_CLK
SWD_CLK.Multiplexed with GPIOA_14
32
GPIOA_15/SWD_TMS
SWD_TMS.Multiplexed with GPIOA_15
33
GPIOA_30/Uart2_log_TXD
GPIOA_30.Multiplexed with Uart2_log_TXD
34
GPIOA_29/Uart2_log_RXD
GPIOA_29 .Multiplexed with Uart2_log_RXD
35
GND
Ground
36
ANT
WIFI Antenna
37
GND
Ground
Parameter
Conditions
Min.
Nom.
Max.
Unit
Receive input frequency
2.4GHz
802.11b/g/n mode
2401
-
2484
MHz
Receiver sensitivity
802.11b
1Mbps
FER<8%,
Packet size=
1,024bytes
---80*
dBm
2Mbps
---80*
dBm
5.5Mbps
---76*
dBm
6.RF Specifications
All measurements are made under nominal supply voltage, room temperature, and
conducted conditions at each antenna port except antenna.
6.1Receiver RF Specifications
PAGE9OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
11Mbps
---76*
dBm
802.11g
6Mbps
PER<10%,
Packet size=
1,024bytes
---82
dBm
9Mbps
---81
dBm
12Mbps
---79
dBm
18Mbps
---77
dBm
24Mbps
---74
dBm
36Mbps
---70
dBm
48Mbps
---66
dBm
54Mbps
---65
dBm
802.11n
(HT20)
MCS0
PER<10%,
Packet size=
1,024byte
---82
dBm
MCS1.
---79
dBm
MCS2
---77
dBm
MCS3.
---74
dBm
MCS4.
---70
dBm
MCS5.
---66
dBm
MCS6.
---65
dBm
MCS7.
---64
dBm
Maximum input level
802.11b
FER<8%
-10--
dBm
802.11g/n
FER<10%
-20--
dBm
Parameter
Conditions
Min.
Nom.
Max.
Unit
Receive input frequency
802.11b/g/n
2.4GHz
2401
-
2483
MHz
Transmit Channel Power
802.11b
11Mbps
151719
dBm
802.11g
54Mbps
131517
dBm
802.11n
2.4GHz, HT20, MCS0~7
131517
dBm
Spectrum mask
802.11b
Fc ±11MHz to ±22MHz
---30
dBm
Fc ±22MHz and more
---50
dBm
802.11g
Fc ±11MHz
---20
dBm
Fc ±20MHz
---28
dBm
Fc ±30MHz
---40
dBm
6.2 Transmitter RF Specifications
PAGE10OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
802.11n
Fc ±11MHz(±21MHz @ HT20)
---20
dBm
Fc ±20MHz(±40MHz @ HT20)
---28
dBm
Fc ±30MHz(±60MHz @ HT20)
---45
dBm
Center Frequency tolerance
802.11b
-20-+20
pmm
802.11g/n
-20-+20
pmm
EVM(Error Vector Magnitude)*
802.11b
1Mbps
--35
%
2Mbps
--35
%
5.5Mbps
--35
%
11Mbps
--35
%
802.11g
6Mbps
---5
%
9Mbps
---8
dB
12Mbps
---10
dB
18Mbps
---13
dB
24Mbps
---16
dB
36Mbps
---19
dB
48Mbps
---22
dB
54Mbps
---25
dB
802.11n
MCS0
---5
dB
MCS1.
---10
dB
MCS2
---13
dB
MCS3.
---16
dB
MCS4.
---19
dB
MCS5.
---22
dB
MCS6.
---25
dB
MCS7.
---28
dB
Remarks
EVM :
<Test condition>
. Method: composite EVM method.
. Phase correction: Symbol-by-symbol correction.
. Channel estimation: Raw channel estimate full packet.
. Symbol timing correction: on.
. Frequency Sync: Long training symbol.
PAGE11OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
Part No.
Description
RW10BX-37PA
Ipex generation Antenna
RW10BX-37PB
Ceramic Antenna
RW10BX-37PC
PIN37/Stamp hole pad
7.Order Information
8.Packaging Information
PAGE12OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
Frequency Band
Antenna Type
Model Number
Max Gain(dBi)
2400-2483.5MHz
Multilayer ceramic antenna
RFANT3216120A5T
2.12
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is
not possible.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This module is intended for OEM integrators under the following conditions:
1.This module is certified pursuant to two Part 15 rules sections(15.247).
2.Antennas: This module has been approved to operate with the antenna types listed below, with the maximum
permissible gain indicated.
3.Label and compliance information
Label of the end product:
The host product must be labeled in a visible area with the following "Contains FCC ID: VYVRW10BX-37P".
The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation.
PAGE13OF 15 Version1.4
PRODUCTS SPECIFICATION RW10BX-37P
4.Information on test modes and additional testing requirements
This module is restricted to integration into hosts for indoor use only.
This module has been approved under stand-alone configuration.
OEM integrator has be limited the operation channels in channel 1-11 for 2.4GHz band.
The separate approval is required for all other operating configurations, including portable configurations with
respect to Part 2.1093 and different antenna configurations
The information on how to configure test modes for host product evaluation for different operational conditions
for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other
transmitters in a host can be found at KDB Publication 996369 D04.
5.Additional testing, Part 15 Subpart B disclaimer
Appropriate measurements (e.g. 15 B compliance) and if applicable additional equipment authorizations (e.g. SDoC)
of the host product to be addressed by the integrator/manufacturer.
This module is only FCC authorized for the specific rule parts 15.247 listed on the grant, and the host product
manufacturer is responsible for compliance to any other FCC rules that apply to the host product as being Part 15
Subpart B compliant.
6.The user manual of the end product should include:
a) Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
b) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from
all persons.
c) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
d) This device is restricted to indoor use.
e) The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter.
PAGE14OF 15 Version1.4
Loading...