Smart Intelligent Temperature Detection Bracelet
User Manual
1，Adapt platform requirements：
Android 4.2 IOS 8.0 or above BT 4.0
2，Before using
Please make sure the bracelet has enough power
for the first time, if the power cannot be started,
please charge the bracelet first.
3，“Lefun Health”APP download
1. Scan the QR code to download
2. Search “Lefun Health” app from App store
or Android market to download.
4，Match the bracelet with phone
Long press the touch button to turn on, please
make sure that the bluetooth of the mobile
phone is enabled. Open the mobile APP- click
the function bar in the upper left corner - click
the APP icon - click "search" - select the MAC
string code that matches the bracelet to show
"bluetooth request pairing" and click "pair and
connect";
5，Operation
Long press for 6 seconds to power on and the
bracelet is connected.
Synchronize time and date of the phone;
The APP can synchronize the movement status
of the bracelet, such as“Sleeping, heart rate,
blood pressure and other data”
Long press the ‘power off’button to turn off.
6，Function
Home: dial can be switched, display time, date,
power;
Measuring Temperature:
Wear it on the wrist and adjust it close to the
wrist. In order to measure the temperature
accurately, it is recommended to measure the
temperature after wearing it for about 10
minutes and test it for about 3 minutes, which
will show the body surface temperature and
body temperature.
Step-counting:
Count the steps for the whole day, clear it at
00:00am every day, you can check the historical
steps in the APP;
Sport Mode:
Record the duration of exercise, clear it at
00:00am every day, you can check the historical
steps in the APP;
Measuring Oxygen:
When the function is switched to the blood
oxygen interface, the measurement will
automatically start.
The result is transferred to the APP for saving;
Measuring Heart rate:
When the function is switched to the heart rate
interface, the measurement will automatically
start.
The result is transferred to the APP for saving;
Sleeping Monitoring:
Record the duration of your sleeping, clear it at
00:00am every day, you can check the historical
steps in the APP;
Measuring Blood Pressure:
When the function is switched to the heart rate
interface, the measurement will automatically
start.
The result is transferred to the APP for saving;
Smart Alarm:
Set the alarm on the app, the bracelet will vibrate
when it is time.
Sedentary Reminder:
Open the ‘sedentary reminder’ from the
"bracelet function Settings"in the app, Switch,
set duration, etc., the bracelet will vibrate when it
is time;
Messages Reminder:
After the bracelet and APP match successfully,
the mobile phone receives the WhatsApp,
WeChat, SMS and other application messages,
the bracelet will be brighten the screen and
vibrate.
Incoming Call Reminder:
After the bracelet is paired with the APP, when
there is incoming call, it willdisplay the contacts
information;
Shake to Take Photos:
Open this function in the APP "bracelet function
Settings". After that, click "shake to take photos"
function to enter the interface;
Find Bracelet:
Click "find bracelet" function, and the bracelet
will vibrate.
Factory Reset:
Set the time to the previous day or the forward
day in the mobile APP to synchronize then can
Type
Smart
bracelet
battery
Li-polymer
Vibrating
motor
Support
synchroniza
tionmethod
Bluetooth 4.0
Working
temperature
-10℃~50℃
sensor
Low power
accelerometer
System
requirement
IOS 8.0 above/Android 4.2 above
clear the bracelet data.
Basic Specification
Notice:
1. Don't wear them for bathing or swimming.
2. Please connect the bracelet when synchronizing data.
3. Do not expose the band to high moisture,extremely
high/low temperature for long periods of time.
4. If the bracelet dies and restarts. Please check the
phone's memory information to clear and try again, or
return the APP and open it again.
Parts Introduction
*We reserve the right to modify the instruction
without notice.
Loading...