ITG-IO 990-ITG-IO-UCT-02B User Documentation

Ph: [phone] Fax: [phone]

www.ultracade.com support@ ultracad e.com

ITG-IO™

User Documentation

Generic Input / O utput JAMMA Interface

Part Number 990-ITG-IO-UCT-02B

Version 02B

UltraCade Technologies

1281 Wayne Avenue

San Jose, CA 95131

May 16, 2005

UltraCade Technologies - ITG-IO User Documentation v ersion 02B - 7/23/2005

Document 040-ITGIOMA-UCT © & ™ 2003-05 UltraC ade Technologies. All Rights Reserved

Table of Contents

!!! IMPORTANT NO TE !!! 3
Legal Statem ent 3
Package Contents 3
Overview 3
Board Image 4
Board Layout 5
Power 6
USB 6
Digital Outputs 7
Video 8
JAMMA Interface 9
Connector Interface 10
PCB Connectors 11
Revision History 12
Contact Inf ormati on 12

UltraCade Technologies - ITG-IO User Documentation v ersion 02B - 7/23/2005

Document 040-ITGIOMA-UCT © & ™ 2003-05 UltraC ade Technologies. All Rights Reserved

2

!!! IMPORTANT NOT E !!!

This document refers to version 02B of the ITG-IO board. 02B is the combination of PCB
version 02 and firmware version 3.0.0.0. Other versions of the PCB and firmware may differ from
the details presented in this document. Please refer to the correct documentation for your specific
hardware (see ‘Revision History’ on page 12).

Legal Statement

The ITG-IO PCB is copyright © & trademark ™ 2003-05 by UltraCade Technologies, All Rights
Reserved. The ITG-IO PCB and algorithms are Patent Pending. ITG-IO is a trademark of
UltraCade Technol ogies.

Package Contents

• User Documentation • ITG-IO PCB

• Video Cable (VGA) 3ft • Audio Cable (3.5mm jack) 6ft

• USB Cable 6ft • HDD Power Cable Male Housing

• HDD Power Cable Female Housing • 4 x HDD Power Cable Male Pins

• 4 x HDD Power Cable Female Pins • Free Gift Offer Card

Overview

The ITG-IO interface card is part of UltraCade Technologies’ series of JAMMA compatible PC
interface cards. For more information and a full list of current products, please go to

www.ultracade.com

The ITG-IO provides a standard JAMMA interface for simple replacement of arcade motherboards
with a more reliable, configurable and upgradeable PC system.

The ITG-IO provides 32 I/Os (16 of each) including one optically decoupled output for complete
isolati on. The remaining 15 outputs are designed f or +12v operation and include surge protection
for electro-mechanical devices. +5v devices may be used; however, care is required as the surge
protection will be minimal.

Conversions are provided for PC video (0.7vpp) to Arcade video (5vpp) and PC audio (3.5mm jack)
to Arcade audio (two mono RCA jacks).

UltraCade Technologies - ITG-IO User Documentation v ersion 02B - 7/23/2005

Document 040-ITGIOMA-UCT © & ™ 2003-05 UltraC ade Technologies. All Rights Reserved

.

3

Board Image

UltraCade Technologies - ITG-IO User Documentation v ersion 02B - 7/23/2005

Document 040-ITGIOMA-UCT © & ™ 2003-05 UltraC ade Technologies. All Rights Reserved

4