i Tech Dynamic C51 A06065 XX User Manual
www.tuv.com
1.6 User Manual
(Cover)
i.Tech Arrow X
User Guide
Version 1
5-Sept-2006
Project No. : C51-A06065-XX
Test Report No.: 14014342 001 Appendix 4 page 14 of 38
www.tuv.com
[Inside Cover]
i.Tech Arrow X Bluetooth Headset gives you more freedom on the move. Pair with compatible Bluetooth mobile
phones and this headset makes it easier for you to carry on with your tasks whilst making a call.
i.Tech Arrow X Bluetooth Headset is compliant with Bluetooth Version 2.0 Class 2 specifications, and is
compatible with the latest mobile phones supporting Bluetooth Headset or Handsfree Profiles.
Test Report No.: 14014342 001 Appendix 4 page 15 of 38
www.tuv.com
(Page 0)
Contents
Title Page
i.Tech Arrow X Bluetooth Headset Overview 2
Getting Started 2
Charging Your Headset
Normal Charging Time
Talk and Standby Time
Battery Low Indication
Turning Your Headset On and Off 5
Pairing Your Headset 6-7
Using Your Arrow X Headset
Answering a Call
Ending a Call
Adjusting the Volume
Muting a Built-in Microphone
Dialing from Your Mobile Phone
Voice Dialing from Your Headset
Last Number Redialing from Your Headset
Rejecting a Call (Handsfree Profile ONLY)
Transferring a Call (Handsfree Profile ONLY)
Resetting or Removing Pairing 12
Care and Maintenance
Headset
Built-in Battery
Charger
Safety Information 15
Troubleshooting 16
Declaration of Conformity (DoC) 17
Product Specifications 18
3-4
4
4
4
8-10
8
8
8
8
9
9
9
10
10
13-14
13
14
14
Test Report No.: 14014342 001 Appendix 4 page 16 of 38
www.tuv.com
(Page 1)
Arrow X Bluetooth Headset Overview
6
7
8
1
2
3
4
5
-
Figure 1
1 Multi-function button (MFB)
2 Volume button +
3 Volume button 4 Speaker (In-ear type)
5 Built-in Microphone
6 Built-in Rechargeable Battery
7 Charging Socket
8 Status Indicator (This small light will flash red, blue or purple dependant on pairing mode and operation)
Test Report No.: 14014342 001 Appendix 4 page 17 of 38
www.tuv.com
Getting Started (Page 2)
To use your i.Tech Arrow X Bluetooth Headset (“the headset”), please follow the steps below:
1. Ensure your headset is fully charged
2. Pair your charged headset with a Bluetooth-enabled mobile phone
Figure 2
Test Report No.: 14014342 001 Appendix 4 page 18 of 38
www.tuv.com
(Page 3)
Charging Your Headset
Figure 3
The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is
recommended to fully charge the battery first.
Test Report No.: 14014342 001 Appendix 4 page 19 of 38
www.tuv.com
(Page 4)
Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the mains charger to an
AC wall outlet. The light on the Arrow Lite (status indicator) will stay red during charging.
IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for
a long time or the battery is drained.
Normal Charging Time
It takes about three hours to fully charge the battery. When the battery is fully charged, the status indicator will
turn blue and remain on. Unplug the mains charger from the AC wall outlet and the charger plug from the
headset. Press and hold the MFB (refer to Figure 1) for two seconds to turn on the headset. Please refer to
“Turning Your Headset On and Off” on the next page for further details.
Talk and Standby Time
A fully charged battery can offer up to 4 hours of talk time and up to 100 hours of standby time. When there are
no calls the headset should remain turned on in standby mode.
Battery Low Indication
When the battery has become low when the headset is on, the status indicator will flash red and the headset will
emit a beep* every minute. Please follow the instructions described above to recharge the battery.
*If you are pairing your headset and your mobile phone in a noisy environment, we advise you to put on the
earphone first so that the beep will be more audible.
Test Report No.: 14014342 001 Appendix 4 page 20 of 38
www.tuv.com
(Page 5)
Turning Your Headset On and Off
Turning On the Headset
Press and hold the MFB (see Figure 1) for two seconds until you hear a short beep. The status indicator will
then flash blue.
IMPORTANT: Press the MFB again when you want to turn on the headset to re-activate pairing and
ensure the connection between the headset and the mobile phone is resumed. For pairing, please refer
to “Pairing Your Headset” on page 6 of this user guide.
Turning Off the Headset
Press and hold the MFB for two seconds until you hear a long beep. The status indicator will turn red and the
headset will turn off.
IMPORTANT: To disconnect the Bluetooth connection, press the headset’s MFB firmly to turn it off. If
you will not be using the headset for a while, we advise you turn off the Bluetooth function on your
mobile phone as well.
Test Report No.: 14014342 001 Appendix 4 page 21 of 38
Loading...