i Tech Dynamic C51 A06001 XX User Manual

www.tuv.com

1.6 User Manual

(Cover)

i.Tech Arrow Lite

User Guide

Version 1 20-Jun-2006 Project No. : C51-A06001-XX

Test Report No.: 14013762 001 Appendix 4 page 14 of 36

www.tuv.com

[Inside Cover]

i.Tech Arrow Lite Bluetooth Headset gives you more freedom when moving around. With your Bluetooth-enabled mobile phone, the headset makes it easy for you to carry on with your tasks while making a call.

i.Tech Arrow Lite Bluetooth Headset is compliant with Bluetooth Version 1.2 Class 2 specifications, and is compatible with mobile phone supporting Bluetooth Headset or Handsfree Profiles.

Test Report No.: 14013762 001 Appendix 4 page 15 of 36

www.tuv.com

(Page 0)

Contents Title Page i.Tech Arrow Lite Bluetooth Headset Overview 2 Getting Started 2 Charging Your Headset Normal Charging Time Talk and Standby Time Battery Low Indication Turning Your Headset On and Off 5 Pairing Your Headset 6-7 Using Your Headset Answering a Call Rejecting a Call Ending a Call Muting a Built-in Microphone Dialling from Your Mobile Phone Voice Dialling from Your Headset Last Number Redialling from Your Headset Rejecting a Call (Handsfree Profile ONLY) Transferring a Call (Handsfree Profile ONLY) Adjusting the Volume 10 Resetting or Removing Pairing 10 Care and Maintenance Headset Built-in Battery Charger Safety Information 13 Troubleshooting 14 Declaration of Conformity (DoC) 15 Product Specifications 16

3-4 4 4 4

8-9 8 8 8 8 9 9 9 9 9

11-12 11 12 12

Test Report No.: 14013762 001 Appendix 4 page 16 of 36

www.tuv.com

(Page 1)

Jawbone Bluetooth Headset Overview

Figure 1

1 Ear Hook 2 Status Indicator 3 Multi-function Button (MFB) 4 Earphone 5 Volume Button 6 Charging Socket 7 Built-in Microphone 8 Built-in Rechargeable Battery

Test Report No.: 14013762 001 Appendix 4 page 17 of 36

www.tuv.com

Getting Started (Page 2)

To use your i.Tech Arrow Lite Bluetooth Headset (“the headset”), please start with the following steps below:

1. Charge your headset, and

2. Pair your headset with a Bluetooth-enabled mobile phone.

Figure 2

Test Report No.: 14013762 001 Appendix 4 page 18 of 36

www.tuv.com

(Page 3)

Charging Your Headset

Figure 3

The headset comes with a built-in rechargeable battery. Prior to using the headset for the first time, it is recommended to fully charge the battery first.

Test Report No.: 14013762 001 Appendix 4 page 19 of 36

www.tuv.com

(Page 4) Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the charger to an AC wall outlet. The status indicator will stay red during charging.

IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for a long time or the battery is drained.

Normal Charging Time

It takes about three hours to fully charge the battery. When the battery is fully charged, the status indicator will turn blue and remain on. Unplug the charger from the AC wall outlet and the charger plug from the headset. Press and hold the MFB (refer to Figure 1) for two seconds to turn on the headset. Please refer to “Turning Your Headset On and Off” on the next page for details.

Talk and Standby Time

The fully charged battery can offer up to 10 hours of talk time and up to 200 hours of standby time. When there are no calls the headset should remain turned on in standby mode.

Battery Low Indication

When the battery has become low when the headset is on, the status indicator will flash red and the headset will emit a beep* every minute. Please follow the instructions describe above to recharge the battery.

*If you are setting up the headset and your mobile phone in a noisy environment, we advise you to put on the earphone first so that the beep will be more audible.

Test Report No.: 14013762 001 Appendix 4 page 20 of 36

+ 16 hidden pages