i.Tech VoiceClip 310 User Guide

VoiceClip 310

Bluetooth Headset

Overview

User Guide

4

3

2

1

1. Multi-function Button (MFB)

• Power On / Off

• Pair with mobile phone

• Answer / End a call

2. Status Indicator

3. USB Charging Socket

4. In-line Microphone

Charging Your Headset

The headset comes with a built-in rechargeable battery. Prior to using the headset for

the first time, it is recommended to fully charge the battery.

Insert the charger’s plug into the headset’s USB charging socket and plug the mains

charger to an AC wall outlet or plug to the PC/notebook.

Use only the supplied charger / USB charging cable to charge the headset.

Headset Status Status Indicator Light

• Charging (OFF MODE) • Solid red

• Fully charged (OFF MODE)

• Off

• Low battery

♦ 3 hours are required to fully charge the headset.

*Warning: Do not use the headset while it is connected to the charger.

Pairing Your Headset with a Bluetooth Mobile Phone

1) Ensure the headset is off.

2) To activate the pairing mode, press and hold the headset’s MFB for 8 seconds

without releasing your finger until its status indicator flashes blue and red alternately.

3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select

“VoiceClip 310” and enter the passcode “0000”. When the pairing is completed, the

headset’s status indicator will flash blue rapidly 5 times and you can hear a long beep.

• Flash red with short beep every

minute

Basic Operation

Function Button Beep / Buzzer Status indictor

POWER ON Press and hold the

Short beep Flash blue light 3

MFB for 2 seconds

When you turn on your headset for the first time, the headset proceeds into pairing

mode, i.e. the status indicator flashes blue and red alternately, so that you can

immediately pair it with your mobile phone.

POWER OFF Press and hold the

MFB for 2 seconds

Incoming call Ringtone through

Answer / End a

call

i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to large

variability between different Bluetooth devices from different manufacturers,

interoperability between the headset and all Bluetooth-enabled products is not

guaranteed.

Press the MFB

once

Long beep Red light for 2

the earphone and

buzzer ON

times

seconds

Blinking purple

Product Specifications

Bluetooth Specification: v2.1 + EDR Class 2