I-Tech UltraView HAP17, UltraView HOP17, UltraView HDP17, UltraView HAP17AV Series, UltraView HOP17AV Series User Manual

User Manual

Innovative LCD Display Solutions

HAP

—

17AV Series

HDP

—

17AV Series

HOP

—

17AV Series

UltraView

Jan 05

P.1

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual

1. Table of Content Page.1

2. Introduction

A) Overview Page.2
B) Features Page.2
C) Dimension Diagrams Page.3-5
D) Technical Specifications Page.6

3. Installation

A) Package Contents Page.7
B) Caution to the user Page.7
C) Cleaning Page.7
D) Precautions Page.8-9

4. Using the System

A) Product Views Page.10-12
B) I/O Outlet Page.13
C) Installation Procedures Page.14
D) Setup Touchscreen (Optional) Page.15

i) For Windows Page.15

ii) For DOS Page.16-18
E) OSD Switch Page.19
F) OSD Control (VGA Version) Page.20-22
G) OSD Control (Video Version) Page.23-27

Disclaimer
This information is subject to change without notice. The producer of this manual accepts no
responsibility for damage or claims, resulting from misuse or misinterpretation.

1. Table of Content

Jan 05

P.2

A. Overview

B. Features

2. Introduction

Disclaimer

This LCD monitor incorporates 17”color active matrix thin-film-transistor (TFT)
liquid crystal display to provide superior display performance. A maximum
resolution of 1280 x 1024 is ideal for displaying complex graphics and high
definition images. Other outstanding designs that enhance this LCD monitor’s
performance are Plug & Play compatibility and OSD (On Screen Display)
controls.

● Ultra High Brightness TFT LCD Display up to 1000 Cd/m

2

.

● Viewable Under Direct Sun Light

● High contrast color TFT LCD display support resolution up to 1280 x

1024.

● Advanced OSD control for picture quality adjustment.

● Detachable stand for wall-mounting application.

● Optional Composite and S-Video input

● Slim and compact size

● Wide Viewing Angle

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual

Jan 05

P.3

HAP-17AV series

C. Dimension Diagrams

2. Introduction

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual

Jan 05

P.4

HDP-17AV series

C. Dimension Diagrams

2. Introduction

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual

Jan 05

P.5

HOP-17AV series

C. Dimension Diagrams

2. Introduction

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual

Jan 05

P.6

Technical Specifications

Monitor

Panel 17" LCD Panel
Display Type TFT LCD active matrix colour
Resolutions 1280 x 1024
Response Time 16ms
Contrast Ratio 500:1 typical
Brightness 1000 cd/m2 typical
Pixel Pitch 0.264(H) x 0.264(V)
Panel Colour 16.2M display colour
Viewing Angle 75 / 75 / 75 / 75 (L / R / U / D)
Storage Temp. -20° to 60°C
Operating Temp. 0° to 50°C
MTBF 50,000 hours

Power Supply

Remote Adapter 110V - 220V AC Input
Adapter Size 108(L) x 64 (W) x 30 (D) mm
Cable Length from

mains plug to adapter

182cm

Cable Length from
adapter Unit

180cm

Power Socket 12V (+) female

Connectors

VGA HDDB 15-pin (female) x 1

Video

Standards Supports NTSC, PAL or SECAM

Product
Dimension

AP Series : 440(W) x 364(H) x 44(D) mm
DP Series : 390(W) x 320(H) x 55(D) mm
OP Series : 406(W) x 324(H) x 51(D) mm

Packing
Dimension

AP / DP / OP Series : 630(L) x 550(W) x 110(H) mm

2. Introduction

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual

After unpacking the carton, check and see if the following items are included in
good condition. Contact your supplier as soon as possible for replacing the
missing / damaged items.

● 17” TFT LCD monitor

● RCA Cable ( For AV Version Only)

● S-Video Cable ( For AV Version Only)

● VGA Cable (Male to Male)

● DC 12V Adapter

● Power Cord

● Mounting Bracket (AP Series only)

● User Manual

● CD Disc

To assure continued FCC compliance, please use grounded power supply
cord and the provided shielded video interface cable with bonded ferrite cores.
If a BNC cable is going to be used, use only a shielded BNC (5) cable. Also,

The Federal Communications Commission warns the user that any

unauthorized changes or modifications to the unit if not expressly approved by
the party responsible for compliance could void the user's authority of
operating the equipment.

1. Gently wipe screen with a clean camel hair lens brush, or a soft, clean,
lint-free cloth. This removes dust and other particles that can scratch the
screen.

2. Do not apply excessive pressure to the screen surface when wiping it clean
because this may damage the LCD.

3. Do not pour or spray any liquid directly onto the screen or case of the LCD
monitor. Chemical cleaners have been reported to damage the screen or
case of the LCD monitor.

A. Package Contents

Jan 05

P.7

B. Caution to The User

C. Cleaning

3. Installation

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual

Jan 05

P.8

Read all of these instructions and save them for later use. Follow all warnings
and instructions on the product.

Product

● Do not cover or block the vent holes in the case.

● Do not insert sharp objects or spill liquid into the LCD monitor through

cabinet slots. They may cause accident fire, electric shock or failure.

● Disconnect the power plug from the AC outlet if you will not use it for an

indefinite period of time.

● Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks.

● Do not touch the screen directly with your fingers. You may damage the

screen, and oil from your skin in difficult to move.

● Do not apply pressure to screen. The LCD is very delicate.

D. Precautions

Power

1. Use the type of power indicated on the marking label.

Plugs

1. Do not remove any of the prongs of the monitor’s three-pronged power

plug.

2. Disconnect the power plug from the AC outlet under following

conditions ：

● If the product will not be used for an indefinite period time.

● When the power cord or plug is damaged or frayed.

● If the product does not operate normally when the operating

instructions are followed.

● Adjust only those controls that are covered by the operating

instructions. Improper adjustment of other controls may result in
damage and will often require extensive work by a qualified
technician to restore the product to normal operation.

● If the product has been dropped or the cabinet has been damaged.

● If the product exhibits a distinct change in performance, indicating a

need for service.

3. Installation

HAP-17AV / HDP-17AV / HOP-17AV Series User Manual