i.Tech SolarVoice 908 User Guide
SolarVoiceTM 908
Bluetooth Headset
User Guide
Contents
Product Specifications
TM
SolarVoice
Getting Started
Charging Your Headset
Indicator Light
Pairing Your Headset with a Bluetooth Mobile Phone
Solar Charging under Sunlight
Using Your Headset
Resetting Your Headset / Removing the Pairing History
Troubleshooting
Safety Information
Care and Maintenance
Declaration of Conformity
908 Overview
3
4
5
5
6-7
7
8
9-11
12
13-14
14-15
16-17
18
2
Product Specifications
Bluetooth Specification: V2.1 + EDR Class 2
Bluetooth Profiles Supported:: Headset, Handsfree, A2DP
Range of Frequency: 2.4GHz spectrum
Nominal Charging Time: Within 3 hours
Talk Time*: Up to 5 hours
Music Playing Time*: Up to 5 hours
Standby Time*: Up to 140 hours
Dimensions: 54.5 (L) x 17 (W) x 11.3 (H) mm /
2.18(L) x 0.67(W) x 0.44(T) inch
Weight: 13.1 grams / 0.42 ounces
* may vary due to the user’s habit, different modes of operation, and mobile phone
settings.
SolarVoiceTM 908 Overview
7
3
1. Solar Panel
• Provide infinity standby time
under direct sunlight
2. Multi-function Button (MFB)
• Power On / Off
8
3
2
(fig.1)
1
5
6
• Pair with mobile phone
• Answer / End a call
3. Status Indicators
• Show Bluetooth status
• Show solar charging status
4. Volume Up & Down
• Adjust Volume Up & Down
• Reject / Transfer a call
4
5. Charging Socket
9
6. Built-in Microphone
7. Cradle for Desktop & Car-use
9
8. Ear Hook
9. In-earbud x 4 (S, M, L, XL)
4
Getting Started
To use your SolarVoiceTM 908 Bluetooth headset (“headset”), please follow the steps below:
1. Ensure your headset is fully charged.
2. Pair your charged headset with a Bluetooth-enabled mobile phone.
Charging Your Headset
The headset comes with a built-in rechargeable
battery. Prior to using the headset for the first
time, it is recommended to fully charge the
battery.
Insert the charger’s plug into the headset’s USB
charging socket and plug the main charger to an
AC wall outlet or plug to the PC/notebook.
Use only the supplied charger / USB charging cable to charge the headset.
Indicator Light
Status Indicator
Headset Status Status Indicator
• Standby
• Charging (OFF MODE)
• Fully charged (OFF MODE)
• Low battery
• Out of battery
• Charging (STANDBY MODE)*
• Fully charged (STANDBY MODE)*
• Out of Range
Solar Charging Indicator
Headset Status Charging Indicator
• Solar Charging under Sunlight • Flash green
5
• Flash blue
• Solid red
• Solid blue
• Flash red with short beep every minute
• The light turns off
• Double flash red
• Double flash blue
• Solid purple for 5 sec with 3 short beeps
6
Indicator Light (cont’d)
♦ Charging indication will be delayed for a few seconds if the headset has not been used for a
long time or the battery is drained.
♦ 3 hours are required to fully charge the headset using charger / USB charging cable.
♦ The headset remains in standby mode after being turned on.
*Warning: Do not use the headset while it is connected to the charger
Pairing Your Headset with a Bluetooth Mobile Phone
1) Ensure the headset is off.
2) To activate the pairing mode, press and hold the headset’s MFB for 8 seconds without releasing your
finger until its status indicator flashes blue and red alternately.
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “SolarVoice 908” and enter
the passcode “0000”. When the pairing is completed, the headset’s status indicator will flash blue
rapidly 5 times and you can hear a long beep.
If the pairing cannot be completed within 3 minutes after the pairing mode has been activated, the
headset’s status indicator will flash purple rapidly 5 times and then turns off. Repeat steps 1 to 3 to pair
both devices again.
Solar Charging under Sunlight
The SolarVoiceTM 908 can provide infinity standby time under the optimum sunlight. When the
TM
SolarVoice
908 is charging by sunlight, the charging indicator will flash green. A Cradle for desktop &
car-use is included in the package.
* Car Installation – Make sure the cradle for desktop & car-use is not in the operating area of any side
impact airbags or any of the other safety or operating equipment in your car. In addition, check that
the cradle is fastened and does not interfere with you being able to operate the vehicle.
7 8
Loading...