Dedicated KVM switch and rackmount screen technology
User Manual 19” Widescreen LCD 1152 x 900 Native Resolution
|-T~E^j|""I
i-Tech
Company LLC
C^DN^RA^TY
TOLL FREE: (888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don't use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40° Celsius (104° Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment's power cord in such a way that others won't trip or fall over it.
■ If you are using a power cord that didn't ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment's electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment's ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don't intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
D Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fluctuation or failure.
□ Use of supplies or parts not meeting our specifications.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Contents
< Part. 1 >
SNW119
1.1
Package Content
1.2 Structure Diagram & Dimension
1.3
Installation
1.4 Connection
P.1
P.1
P.
3
P.6
< Part. 2 > Specifications / OSD
2.1 Product Specifications P.8
2.2 Keyboard / Mouse Specifications
P.
10
2.3 On-screen Display Operation (OSD )
P.
12
< Part. 3 > Options
3.1 48V, 24V or 12VDC power
P.
14
Contents
< Part. 4 > KVM Integration
Matrix CAT6 KVM
Local Remote
E3
8-port
16-port
32-port
Matrix CAT6 KVM
1 1 l - - MC1116 - MC1132
Matrix CAT6 KVM
1 1 2 - - MC2116 - MC2132
Matrix CAT6 KVM
1 1 0 - - MC0116 - MC0132
Matrix CAT6 KVM
1 2 0 - - MC0216 - MC0232
Matrix CAT6 KVM
1 3 0 - - MC0316 - MC0332
Combo CAT6 KVM
Local Remote
G3
8-port
16-port 32-port
Combo CAT6 KVM
1 0 l - CIP8 - CIP16 - CIP32
Combo CAT6 KVM
1 1 0 - CCE8 - CCE16 - CCE32
Combo CAT6 KVM
1 0 0 - C8 - C16 - C32
Matrix DB-15 KVM
Local Remote
Eza
8-port
16-port 32-port
Matrix DB-15 KVM
1 1 i - Ml 18 - Ml 116 -
Matrix DB-15 KVM
1 1 2 - M218 - M2116 -
Matrix DB-15 KVM
1 1 0 - M018 - MOl 16 -
Matrix DB-15 KVM
1 2 0 - M028 -
M021 6
-
Matrix DB-15 KVM
1 3 0 - M038 -
M031 6
-
Combo DB-15 KVM
Local Remote
EZ3
8-port
16-port 32-port
Combo DB-15 KVM
1 0 l - 82 - 162 -
Combo DB-15 KVM
1 1 0 - CE8 - CE16 -
Combo DB-15 KVM
1 0 0 - S801 -
SI
601 -
DVI-D KVM
Local Remote
(za
12-port
DVI-D KVM
1 0 0 - D12
USB
Hub DB-15 KVM
Local Remote
Eza
8-port
16-port 32-port
USB
Hub DB-15 KVM
1 0 i - 82H - 162H -
USB
Hub DB-15 KVM
1 1 0 - CE8H - CE16H -
USB
Hub DB-15 KVM
1 0 0 - 801H -
1601 H
-
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
4k Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
® Disconnect the power
cord.
® Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
© Disconnect the power
cord.
© Spray a small amount of non-abrasive cleanser on a microfiber cloth.
^^ Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
•* microfiber cloth first, not directly on the parts you are cleaning.
® Gently wipe the surface. Use as little pressure as possible.
® Wait until your monitor is completely dry before plugging it in and powering it up.
< Part 1 >
< 1.1 > Package Content
SNW119unit
X1
- CV-6
6ft
DVI-D console cable
X 1
(Alternative : CB-6
6ft
VGA console cable
)
- Power cord
X 1
- M6 screw, cage
nut &
cup washer
X 8
The above package content is only for the single console models.
It varies with options such as KVM & DC power.
<
1.2 >
Structure Diagram
© LCD interchangeable module
kit
© Installation Slides
® LCD membrane
Membrane switch (KVM option)
©
Micro switch
for
screen auto power
off
© Audio speaker
(for
HDMI or Audio option
)
® Keyboard interchangeable module
kit
® Mouse interchangeable module
kit
® Blue Power LED
© Front USB port
for
device access ( USB Hub KVM only
)
® Molded front handle
P.1
< 1.2 > Dimension
Front View
Side View
=4
50.1
Qpg
H
460
UNIT: mm
1mm = 0.03937 inch
Top View
B
-"-
«^=^*»
( "T"
!
r\
!
^r
k
^
460
1
'
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
SNW119 series
441.6x460x44 mm
17.4x18.1 xl.73"
590 x 768 x 140 mm
23.2x30.2x5.5"
11.5 kg
25 lb
16.3 kg
36 lb
The weight is only for the single console models. It varies with accessories & options
such as KVM & DC power.
P.2
nstall Installation Slides
Step O
Insert the left and right rear mounting brackets into
the LCD console drawer.
Step O
Measure the depth of the front and rear mounting rails.
Align each rear mounting bracket to a suitable length.
Step O
Complete the installation
■ Fix the LCD console drawer into the rack.
Mm M6 screw, cage nut & cup washer x 8 are provided.
P. 3
< 1.3 > Installation - How to install 2 post rack brackets
Step O
Release front mounting ears before applying 2 post
rack brackets.
Insert rear mounting brackets into the LCD console
drawer.
Option
Model :MB-751-12
Rear mounting
Front mounting
Step O
Align each rear mounting bracket to a suitable length.
J
s^Cs^?^
\J
Step O
Complete the installation
■ Fix the LCD console drawer into the 2 post rack.
A
M6 screw, cage nut & cup washer x 8
are not provided.
P.4
< 1.3 > Installation- How to use the drawer
Hold the handle and slide out the
drawer.
:
&-:£::£
Flip up the LCD to a suitable angle.
f H
Operate the LCD console drawer.
P. 5
< 1.4 > Connection to USB Server via CV-6 cable
LCD Console Drawer
Power
USB server
DVI-D KVM
|°!
Ittlrttll"] <£gSJjl
CV-6 DVI-D
console cable
DVI-D
< 1.4 > Connection to external KVM via CV-6 cable
DVI-D
LCD Console Drawer
Si-
Power
USB
DVI-D KVM
CV-6 DVI-D
console cable
DVI console KVM
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
P.6
<
1.4 >
Connection
to
USB Server
via
NB-6 cable
LCD Console Drawer
0|:-J Power
USB server
KVM <^>
USB
NB-6 VGA
console cable
VGA
^Si
<
1.4 >
Connection
to
external KVM
via
NB-6 cable
LCD Console Drawer
Power
KVM <H>
USB
n
NB-6 VGA
console cable
VGA
JB<@)®IP'S'<IP<!B^4!£'^S^
(
3S»<@'
I USB console KVM
■MS'gM&'W&'giMfc^M&'fiMfr'gMfetfB&'Mfc
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage
to
the servers, KVM and LCD
console drawer. Before attempting
to
connect anything
to
the LCD console drawer,
we
suggest
turning
off
the power
to all
devices. Apply power
to
connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
P.7
< Part
2 >
< 2.1 > Product Specifications
Manufacturer
j^fl
fffy
Panel Size ( diagonal)
19-inch Widescreen TFT color LCD
Display pixel ( dots x lines )
1152x900 (Direct)
Display pixel ( dots x lines )
1440x900 (Native)
Brightness (typ.)
250
Contrast Ratio (typ. )
1000:1
Color
16.7 M
Viewing Angle (
L/R/U/D
)
80/80/80/80
Response Time ( ms )
5
Dot pitch ( mm )
0.2835
Display Area ( mm )
408.24Hx 255.15V
Surface treatment
Haze 25%, Hard-coating
Surface hardness
3H
Backlight Type
LED
MTBF ( hrs )
30,000
Video
Connectivity
Digital
HDMI HDMI
1.1,CEA-861-D
Digital
DVI
DVI-D,
TMDS single link
Analog
VGA
Analog 0.7Vp-p
Plug & Play
DVI / VGA VESA EDID structure
1.3
Synchronization
VGA
Separate, Composite
& SOG
Audio
Connectivity
Audio Input
Connector
3.5mm
stereo jack
Audio Input
Impedance / Power level 30kO / 750mV
Audio Output
Connector
3.5mm
stereo jack
Audio Output
Resistance / Power level
30kO
/ 2.8V
Speaker Output
Power 2x2W
*When
the
audio output
is
connected, speaker output
is
OFF
Power Supply
Range
Auto-sensing 100
to
240VAC,
50 / 60Hz
Power Consumption
Screen display
ON
25W
or
less
Power Consumption
Power saving mode 4W
or
less
Power Consumption
Power button
OFF
1W
or
less
Regulatory | Safety
cUL,
FCC & CE
certified
| Environmental
RoHS2 & REACH compliant
P. 8
Environmental
Conditions
Operating Temperature 0 to 50°C degree
Humidity
20-90%,
non-condensing
Storage
Temperature -5 to 60°C degree
Humidity 5-90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration
5~500Hz
1G RMS random
Physical
Specification
Product (WxDxH )
441.6x460x44 mm
17.4 x 18.1 x 1.73 inch
Packing ( W x D x H )
590x768x140 mm
23.2x30.2x5.5 inch
Net Weight
11.5 kgs/25 lbs
Gross Weight
16.3 kgs/36 lbs
DVI-D/VGA Input PC Signal 1152 x900 x66Hz
1440 x900 x60Hz
1280 x 1024 x 60 / 75Hz
1280 x960 x60Hz
1280x760x60/75Hz
1152 x864 x75Hz
1024x768x60/70/75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P. 9
< 2.2 > Keyboard / Mouse Specifications
Se S keyboard integrated with touchpad
1
I
i I
Sb S keyboard integrated with trackball
S keyboard integrated with touchpad / trackball SOLARIS
■ Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
■ 104 key notepad keyboard with full numerical pad and SUN function
■ USB interface
Key force 55±5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
Software support MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac / SUN system
Supporting layouts
America
United States
P.10
< 2.2 > Keyboard / Mouse Specifications
How to Use "S" Keyboard
Fn
Num
■ S
^^
" Undo
Copy
Help 1
Again 1
F
1
Fn
Num
■ S
^^
" Undo
Copy
Help 1
Again 1
r Props *|
s^~:
Fn
Num
■ S
^^
" Undo
Copy
Find 1
Cut 1
P Open 1
r Paste "1
s^~:
■
P Open 1
r Paste "1
s^~:
2 £
2 vU;/ x
Num LED in Off mode
Key pad behaves as a SUN Solar
system administration command mode
Num LED in Green mode
Key pad behaves as a normal key
pad mode
Audio / Display Keys * Please ask your supplier for full details
F9
CD A
F9
Audio : Mute
Display : Degauss
X
F11
>
<
■s
F11
Audio : Decrease volume
Display : Decrease contrast
F12
r> cS
F12
Audio : Increase volume
Display : Increase contrast
P.11
< 2.3 > On-screen Display Operation ( OSD )
:= t>
Membrane Switch Function
6
Turn the monitor on or off
DCZI
□
□
Dl=l
Display the OSD menu
Act as an Enter key to select screen setting options
A V < >
Scroll through menu options and adjust
the displayed control
S
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Remark : All LED touch buttons in WHITE light.
The LED of Power ft touch button will flash continuously when there is no signal input.
(T) All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power @ ).
@ Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power © ).
P.12
< 2.3 > On-screen Display Operation ( OSD )
OSD Configuration Page
Ver: G56SN20SSTD701 1024x768 59.8Hz
Mi
Image
Brightness [1
Contrast J
Color Temp User
Red I^^M
Green [I
Blue J
Adjust: Select: ♦+ Set: ®/i=i
m
Image:
for the brightness, contrast, color
temp,
red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
to-
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
J>
Audio:
for volume, bass, treble, balance, AVL and mute
Misc
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
] 50
] 50
0 255
Q 255
Q 255
Exit: t
P.13
< Part
3 >
< 3.1 > Options
: DC
Power
Model
12V
24V 48V
Input rating
Input voltage: 12-Volt
24-Volt 48-Volt
Input range: 9-18V
18-36V 36 ~ 75V
Input current
-
No
load 50 mA
50 mA 50 mA
- Full load 4950
mA
2450
mA
1220 mA
Output rating
Output voltage: 12-Volt
12-Volt 12-Volt
Output current:
4.16A
4.16A 4.16A
Efficiency
84%
85% 85%
DC power
KVM
DVI-D
[°l BHJ°|
n_n_r
o
e©
Lnj-L
O
KVM
***
For DC power option :
(1 ) Option excludes 1 x power cord and 1 x AC power adapter.
( 2 ) Casing depth will be extended from 460mm
(18.1"
) to 530mm ( 20.9" )
P.14
I-TECH
COMPANV
i-Tech
Company LLC
TOLL FREE: (888) 483-2418
EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com
Loading...