Dedicated KVM switch and rackmount screen technology
User Manual 17” / 19” / 20” LCD 1152 x 900 Native Resolution
SNP717 / SNP819 / SNP920
SUN Rackmount Display Panel
^^— Options:
SOLARTS
9
_
DC power
R£ C€ 6?
REACH
I-TE^JH"I
i-Tech
Company LLC
C^DN^RA.N^f'
TOLL
FREE:
(888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don't use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40° Celsius (104° Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment's power cord in such a way that others won't trip or fall over it.
■ If you are using a power cord that didn't ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment's electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment's ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don't intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
D Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fluctuation or failure.
□ Use of supplies or parts not meeting our specifications.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Contents
<Part. 1> SNP717/SNP819/SNP920
1.1 Package Content
P.
1
1.2 Structure Diagram & Dimension P.1
1.3 Installation P.5
< Part. 2 > Specifications / OSD / Remote Controller
2.1 Product Specifications P.6 - 9
2.2 On-screen Display Operation ( OSD ) P.10 -11
< Part. 3 > Options
3.1 48V, 24V or 12VDC power
P.
12
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
4k Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
® Disconnect the power
cord.
® Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
© Disconnect the power
cord.
© Spray a small amount of non-abrasive cleanser on a microfiber cloth.
^^ Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
•* microfiber cloth first, not directly on the parts you are cleaning.
® Gently wipe the surface. Use as little pressure as possible.
® Wait until your monitor is completely dry before plugging it in and powering it up.
< Part 1 >
<
1.1 >
Package Content
soiaris
*u
S»T- Ilia
|
SNP717
or
SNP819
or
SNP920
x 1
6ft VGA cable
X1
Power adapter
X 1
Power cord
X 1
<
1.2 >
Structure Diagram
Front view
©
LCD
panel
©
LCD
membrane
© Power adapter basket
DVI-D
o
ft
°
o
o
o
o
~
II
°
II
o
ft
°
P920
o
o
o
o
~
II
°
II
SNP819
If
c
•
•
•
I
i
o
SN
P920
o
o
o
o
~
II
°
II
SNP819
If
c
•
•
•
I
i
%9
o
o
o
o
o
o
~
II
°
II
SNP819
If
c
•
•
•
I
i
%9
o
a a
%9
o
a
1
'
Power
©
Basic
I/O :
DVI-D
+ VGA
Option
: DC
power
Rear view
VGA
SNP717
4^
Power adapter
Power cord
P.1
< 1.2 > Dimension - SNP717
Front View
Side View
o o
o
px
SNP717
OJ
i^
OJ
i
i
\
9
t
t
I
f
e
i
in
CO
OJ
o
X.
o ||
II
340
II o
II
o ||
II
II o
II
o ||
II
463
-^
480
^~
Bottom View
480
Czfr 0# °@®®
J b
440
UNIT: mm
1mm =
0.03937
inch
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
SNP717
480x54.2x310 mm
18.9x2.1 x12.2 inch
529 x124 x495 mm
20.8x4.9x19.5 inch
6.1kg
13.4 lbs
8.2 kg
18 lbs
P.2
< 1.2 > Dimension - SNP819
Front View
Side View
o
° II
SNP819
o
CO
379
c
•
e
e
•
e
5
ON
OJ
3 —
00
in
CO
o
° II
c
•
e
e
•
e
5
ON
OJ
3 —
00
in
CO
463
480
CO
ON
co
Bottom View
UNIT: mm
1mm =
0.03937
inch
480
<Q» O ® ° ®o® *"
b
440,6
n
CO
in
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
SNP819
480x53.3x354.8 mm
18.9x2.1 x 14 inch
539 x129 x529 mm
21.2x5.1 x20.8 inch
5.7 kg
12.5 lbs
8 kg
17.6 lbs
P.3
<
1.2 >
Dimension - SNP920
Front View
Side View
o
o
SNP920
C^
o
CO
411
o
o
■»—1
o
\D
o
CXJ
\0
o
-
CO
o
o
o
o
■»—1
o
\D
o
CXJ
\0
o
-
CO
o
o
■»—1
o
\D
o
CXJ
\0
o
-
CO
= =
/ A V
< > ■ 5 6 /
"^
463
480
Bottom View
480
C3>
©#
Oee©
J lb
445
UNIT:
mm
1mm =
0.03937
inch
Model
Product Dimension
(W x D
x H)
Packing Dimension
(W x D
x H)
Net
Weight
Gross
Weight
SNP920
480x63.5x399
mm
18.9x2.5x15.7inch
583 x124 x529
mm
23x4.9x20.8 inch
8.5 kg
19 lbs
11
kg
24
lbs
P.4
< 1.3 > Installation
SP-717 / SP-819
Step O
■ Mount the display panel with M6 screw set.
■ M6 screw x 4 pcs required ( Left & right side ).
M6 screw sets are not provided.
Step O
Fix the LCD into the rack.
SP-920
Step O
■ Mount the display panel with M6 screw set.
■ M6 screw x 8 pcs required ( Left & right side ).
M6 screw sets are not provided.
Step 0
■ Fix the LCD into the rack.
P.5
< Part 2 >
< 2.1 > Product Specifications - SNP717 / SNP819
SNP717 SNP819
Manufacturer
AJO
AJO
Panel Size ( diagonal)
17-inch TFT color LCD 19-inch TFT color LCD
Display pixel ( dots x lines )
1152x900 (Direct) 1152x900 (Direct)
Display pixel ( dots x lines )
1280x1024 (Native) 1280x1024 (Native)
Brightness (typ. )
250 250
Contrast Ratio (typ. )
1000:1 1000:1
Color
16.7 M 16.7 M
Viewing Angle (L/R/U/D)
80/80/80/80 85/85/80/80
Response Time ( ms )
5 5
Dot pitch ( mm )
0.264 0.294
Display Area ( mm )
337.92HX 270.33V 376.32Hx301.06V
Surface treatment
Haze 25%, Hard-coating
Surface hardness
3H 3H
Backlight Type
CCFL LED
MTBF ( hrs )
50,000 30,000
Video
Connectivity
Digital DVI
DVI-D.TMDS single link
Analog
VGA
Analog
0.7Vp-p
Plug & Play
DVI / VGA VESA EDID structure 1.3
Synchronization VGA
Separate, Composite & SOG
Audio
Connectivity
Audio Input
Connector
3.5mm
stereo jack
Audio Input
Impedance / Power level 30kO / 750mV
Audio Output
Connector
3.5mm
stereo jack
Audio Output
Resistance / Power level 30kQ / 2.8V
Speaker Output
Power 2x2W
"When the audio output is connected, speaker output is OFF
Power Supply
Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON 25W or less
Power Consumption
Power saving mode 4W or less
Power Consumption
Power button OFF
1W or less
Regulatory
Safety
FCC & CE certified
Environmental
RoHS2 & REACH compliant
R6
Operating Temperature 0 to 50°C degree Operating
Humidity
20-90%,
non-condensing
Storage
Temperature -5to60°Cdegree
Storage
Humidity 5-90%, non-condensing
Storage
Shock 10G acceleration (11ms duration)
Storage
Vibration
5-500Hz
1G RMS random
SNP717 SNP819
Product ( W x D x H )
480x54.2x310 mm
18.9x2.1 x 12.2 inch
480 x 53.3 x 354.8 mm
18.9x2.1 x 14 inch
Packing (WxDxH )
529 x 124 x495 mm
20.8 x 4.9 x 19.5 inch
539 x 129x529 mm
21.2x5.1 x 20.8 inch
Net Weight 6.1 kgs/13.4 lbs 5.7 kgs/12 lbs
Gross Weight
8.2kgs/18lbs
8 kgs/17.6 lbs
DVI-D/VGA Input PC Signal 1152 x900 x66Hz DVI-D/VGA Input PC Signal
1280 x 1024 x 60 / 75Hz
DVI-D/VGA Input PC Signal
1280 x960 x60Hz
DVI-D/VGA Input PC Signal
1280x760x60/75Hz
DVI-D/VGA Input PC Signal
1152 x864 x75Hz
DVI-D/VGA Input PC Signal
1024x768x60/70/75Hz
DVI-D/VGA Input PC Signal
848 x 480 x 60Hz
DVI-D/VGA Input PC Signal
800 x 600 x 60 / 72 / 75Hz
DVI-D/VGA Input PC Signal
720 x 400 x 70Hz
DVI-D/VGA Input PC Signal
640 x 480 x 60 / 72 / 75Hz
DVI-D/VGA Input PC Signal
640 x 400 x 70Hz
DVI-D/VGA Input PC Signal
640 x 350 x 70Hz
P.7
< Part 2 >
< 2.1 > Product Specifications - SNP920
Manufacturer @ LG
Panel Size ( diagonal)
20-inch TFT color LCD
Display pixel ( dots x lines )
1152x900 (Direct)
Display pixel ( dots x lines )
1600x1200 (Native)
Brightness (typ.)
300
Contrast Ratio (typ. )
800:1
Color
16.7 M
Viewing Angle (
L/R/U/D
)
89/89/89/89
Response Time ( ms )
16
Dot pitch ( mm )
0.255
Display Area ( mm )
408.00H x 306.00V
Surface treatment
Anti-glare, Hard-coating
Surface hardness
3H
Backlight Type
CCFL
MTBF ( hrs )
45,000
Video
Connectivity
Digital DVI
DVI-D,
TMDS single link
Analog
VGA
Analog
0.7Vp-p
Plug & Play DVI / VGA
VESA EDID structure 1.3
Synchronization VGA
Separate, Composite & SOG
Audio
Connectivity
Audio Input
Connector
3.5mm
stereo jack
Audio Input
Impedance / Power level 30kQ / 750mV
Audio Output
Connector
3.5mm
stereo jack
Audio Output
Resistance / Power level 30kO / 2.8V
Speaker Output
Power 2x2W
*When the audio output is connected, speaker output is OFF
Power Supply
Power Consumption
Range
Screen display ON
Power saving mode
Power button OFF
Auto-sensing 100 to 240VAC,
50 /60Hz
48W or less
4W or less
1W or less
Regulatory
I Safety
FCC & CE certified
| Environmental
RoHS2 & REACH compliant
R8
Environmental
Conditions
Operating Temperature 0 to 50°C degree
Humidity
20-90%,
non-condensing
Storage
Temperature -5 to 60°C degree
Humidity 5-90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration
5~500Hz
1G RMS random
Physical
Specification
Product (WxDxH )
480x63.5x399 mm
18.9 x 2.5 x 15.7 inch
Packing ( W x D x H )
583 x 124x529 mm
23x4.9x20.8 inch
Net Weight
8.5kgs/19lbs
Gross Weight
11 kgs/24lbs
DVI-D/VGA Input PC Signal 1152 x900 x66Hz
1600 x1200 x60Hz
1400 x1050 x60Hz
1440 x900 x60Hz
1360 x768 x60Hz
1280 x 1024 x 60 / 75Hz
1280 x960 x60Hz
1280x760x60/75Hz
1152 x864 x75Hz
1024x768x60/70/75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P.9
< 2.2 > On-screen Display Operation ( OSD )
SNP819
O Power light
• Green = On
Orange = Power saving
Membrane Switch
•©<►♦*♦
Function
e
Power on / off LCD
Display the OSD menu
4><$><$$>
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button ^P for 5 seconds)
(p>
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
SNP717/SNP920
M E*9 ^M Eg cJ UJ Kiil W
Membrane Switch
Function
0
Turn the monitor on or off
DCZI
Dl=l
DCZI
Display the OSD menu
Act as an Enter key to select screen setting options
A V <
>
Scroll through menu options and adjust
the displayed control
^
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Remark : All LED touch buttons in WHITE light.
The LED of Power (§) touch button will flash continuously when there is no signal input.
(T) All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power @
© Light up all membrane buttons, please press any button for 1 - 2 seconds (except the Power © ).
P.10
< 2.2 > On-screen Display Operation ( OSD )
OSD Configuration Page
Ver: G56SN20SSTD701 1024x768 59.8Hz
m
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
m
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
^^^^M 50
m
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
m
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
^^^^^m 50
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
User
m
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
User
m
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
i=f
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
\M~
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
Image
Brightness
Contrast
Color Temp
Red |
Green
Blue |
Adjust: +
■*
Select: ♦ + Set: «/m Exifct
m
Image:
for the brightness, contrast, color
temp,
red, green, and blue
Ci3
Geometry:
for the auto adjust, H position, V position, phase and clock
\*
Video:
for the
colour,
tint, sharpness, noise reduction, DCDi and TV Setup
J>
Audio:
for volume, bass, treble, balance, AVL and mute
Misc
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
P.11
< Part 3 >
< 3.1 > Options : DC Power
+
Model 12V
24V 48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range: 9-18V
18-36V 36 ~ 75V
Input current
- No load 50 mA
50 mA 50 mA
- Full load 4950 mA
2450 mA 1220 mA
Output rating
Output voltage: 12-Volt
12-Volt 12-Volt
Output current: 4.16A
4.16A 4.16A
Efficiency
84%
85% 85%
l-TECH
COMPANV
i-Tech
Company
LLC
TOLL FREE: (888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com
P.12
Loading...