I-Tech RKP215, RKP217, RKP219 User Manual

User

Manual

RKP215 / 217 / 219

2U 15” / 17” / 19” Rackmount

TFT LCD Monitor Keyboard Drawer

Rev. : 1.0

P.1

1. Table Of Content

RKP215 / RKP217 / RKP219 User Manual

1. Table of Content P.1

2. Introduction P.2

3. Features P.2

4. Package Contents P.3

5. Optional Accessories P.4

6. Peripheral Products P.4

7. Important Safeguards P.5

8. Structure Diagram P.6

9. Dimension Diagram

RKP215 P.7

RKP217 P.8 RKP219 P.9

10. LCD OSD Menu Operation

LCD Membrane Diagram P.10

Main Menu P.10 Sub Menu P.11-12

11. Resolution Settings

For Windows P.13

For Sun Servers P.14

12. Technical Specification P.15

Rev. : 1.0

P.2

RKP Series is a combination of keyboard, mouse and monitor into a drawer, with features such as flip-up design, adjustable brackets, built in LCD OSD to provide effective assistant for an administrator to control PC system.

RKP Series provides cost effective for your limited IT budget over using CRT and rack mounting. Also, it will be space saving for your compact environment rack and effective assistant for an administrator to control PC system.

2. Introduction

3. Features

● Unique monitor flip up design allows viewing through closed glass door

of cabinet

● Three models to choose from 15”, 17” or 19” LCD Panel

● Three keyboard selections supporting multiple languages

● Slide rails have two fixed positions to prevent movement of both LCD

and keyboard drawer

● Front-access lock for security.

● Build-in slide rail and mounts easily in any 19” cabinet

● Built in On Screen Display controlled by integral membrane switches.

● Lightweight Aluminium construction – with black anodize finish

● Supplied with 12V 5A remote power adapter (single power source)

Disclaimer This information is subject to change without notice. The producer of this manual accepts no responsibility for damage or claims, resulting from misuse or misinterpretation

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.3

4. Package Contents

Before Unpacking

It is very important to locate the LCD Keyboard Drawer in a suitable environment.

● The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or

mounted into a suitable cabinet.

● Make sure the place has good ventilation, is out of direct sunlight, away from sources of

excessive dust, dirt, heat, water, moisture and vibration.

● Convenience for connecting the LCD Keyboard Drawer to the related facilities should be

well considers too.

Unpacking

The LCD keyboard drawer comes with the standard parts shown as above. Check and make sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.

LCD Monitor1 Piece User Manual1 Piece DC Power Adapter1 Piece Power Cord1 Piece Mounting Bracket1 Pair Fasteners4 Pieces Key for front access lock2 Pieces CD-6 3-in-1 KVM cable1 Piece

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.4

6. Peripheral Products

5. Optional Accessories

Model Description

SUN-31 SUN / iMac USB to PS/2 adapter

Video Input 15" - 19" Touch Screen 12V / 24V / 48V DC Power Supply

RKP215 / RKP217 / RKP219 User Manual

Model Description

CV-401 / CV-801 / CV-1601 4-Port / 8-port / 16-Port PS/2 KVM switch CV-1602 16-Port 2-Console PS/2 KVM switch CV-S801 / CV-S1601 8-Port /16-port USB KVM switch CV-S1602 16-port 2-Console USB KVM switch CV-101 CAT.5 PS/2 KVM extender

Rev. : 1.0

P.5

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

● Unplug the LCD Keyboard Drawer from the power outlet before cleaning.

● Do not spray liquid cleaners or aerosol directly on the device. Wet a cloth with a

neutral detergent (e.g. clean water) and squeeze it tight, then clean the screen slightly with it.

● Do not expose the LCD Keyboard Drawer directly to rain, water, moisture or

sunlight.

● Avoid pressure on the LCD screen to prevent permanent damage to the display.

● Do not attempt to service the device yourself. Improper operation may void your

warranty. Refer all servicing to qualified service personnel.

● Safe storage environment of the LCD Keyboard Drawer is ranging between –20

o

C and 60oC. Permanent damage could occur if the LCD Keyboard Drawer is stored outside the safe range.

● Unplug the LCD Keyboard Drawer immediately and call qualified service

personnel under the following conditions:

1. If the monitor has been exposed to rain, liquid or water.

2. If the monitor has been dropped or the casing has been damaged.

What the warranty does not cover

1. Any product, on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from: a) Accident, misuse, neglect, fire, water, lightning, or other acts of nature,

unauthorized product modification, or failure to follow instructions supplied

with the product. b) Repair or attempted repair by anyone not authorized by us. c) Any damage of the product due to shipment. d) Removal or installation of the product. e) Causes external to the product, such as electric power fluctuation or failure. f) Use of supplies or parts not meeting our specifications. g) Normal wear and tear. h) Any other causes which does not relate to a product defect.

3. Removal, installation, and set-up service charges.

7. Important Safeguards

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.6

8. Structure Diagram

1. PS/2 keyboard

2. Aluminium front panel

3. Class A active matrix TFT LCD panel

4. Analog to digital signal converter board

5. Rear metal case

6. LCD inverter

7. LCD membrane

8. Ball bearing telescopic slides with stopper

9. Adjustable mounting bracket

10. Optional KVM switch

• ‚ ƒ „ … †

‡

Š

‰ ˆ

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.7

RKP215 2U 15” LCD Keyboard Drawer

9. Dimension Diagram

RKP215 / RKP217 / RKP219 User Manual

15” LCD

RKP217 2U 17” LCD Keyboard Drawer

9. Dimension Diagram

RKP215 / RKP217 / RKP219 User Manual

17” LCD

Rev. : 1.0

P.8

RKP219 2U 19” LCD Keyboard Drawer

9. Dimension Diagram

RKP215 / RKP217 / RKP219 User Manual

19” LCD

Rev. : 1.0

P.9

Rev. : 1.0

P.10

10. LCD OSD Menu Operation

LCD Membrane Diagram

Left

Right

Exit

Menu/Selection Power

MAIN MENU

BRIGHT/CONTRAST AUTO ADJUST PHASE/CLOCK H/V POSITION MISC RESET

Main Menu

Bright / Contrast

● To enter into the Bright, Black level & Contrast sub-menu

Auto Adjust

● To perform automatic optimisations of all functions

● An “ Adjusting” message is displayed during the process

Phase / Clock

● To enter into the phase & clock sub menu

H/V Position

● To enter into the Position sub-menu

MISC

● To enter into the MISC sub-menu

Reset

● Reset to the default factory settings

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.11

Bright / Contrast

1. Brightness

● To perform brightness adjustment of the input RGB signal

● Use the Left & Right button to adjust and button to “Brightness”

2. Contrast

● To adjust the contrast level of the input signal

● Use the Left & Right button to adjust and button to “Contrast”

Phase / Clock

1. Phase

● To adjust input video sampling clock’s phase

● Use the Left & Right button to adjust and button to “Phase”

2. Clock

● To adjust input video sampling clock

● Use the Left & Right button to adjust and button to “Clock”

H/V Position

1. H.Position

● To adjust the horizontal size of the frame

● Use the Left & Right button to adjust and button to “H.position”.

2. V.Position

● To adjust the vertical position of the frame

● Use the Left & Right button to adjust and button to “V.position”.

10. LCD OSD Menu Operation

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.12

10. LCD OSD Menu Operation

MISC

1. Information

● The first header row shows the current resolution setup

● The second header row shows the horizontal frequency of the current

input signal

● The third header row shows the vertical frequency of the current input

signal

2. OSD Timer

● To modify the duration of the OSD time-out

3. Color a) 5500K

● Select Colour Temp at 5500K

b) 6500K

● Select Colour Temp at 6500K

c) 9500K

● Select Colour Temp at 9500K

d) User

● Change Colour Temp by manual

4. Language

● To select the language of OSD menu 7 Languages :

(1) English (2) Japanese (日本語)

(3) Chinese (中文) (4) German

(5) Francais (6) Espanol (7) Italiano

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.13

11. Resolution Settings

For Microsoft Windows

Step 1 – Press right click on the desktop

Step 2 – Choose “Properties”

Step 3 – Change the “Screen Resolution”

Step 4 – Change the “Screen refresh rate”

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.14

11. Resolution Settings

For SUN Servers

● Resolution configuration procedures should be run by qualified SUN

server administrator

● Sun Servers are using resolution at 1152 x 900 x 76Hz.

● Supported resolution mode for 15” LCD:

● 1024 x 768 x 70/75Hz

● Supported resolution mode for 17” LCD:

● 1280 x 1024 x 75Hz

● You need to change the Sun Server resolution before you connect to

LCD Display.

● Please do the following procedures to change the resolution settings :

1. As root: You may find the following comment “/user/sbin/m64config”.

2. To view current resolution: Type “/user/sbin/m64config – prconf”.

3. To change to 1024x768 @ 70MHz: Type “/user/sbin/m64config – res 1024x768x70 now”.

4. The screen will be rubbish.

5. Then type “pkill Xsun”.

And Type “pkill Xsession” to restart the Xsession.

● Under Common Desktop Environment (CDE).

● To change the OpenBoot resolution, you can type the following

command in OK prompt.

1. In OK prompt, type “setenv output-device screen:r1024x768x70”.

2. Type “printenv” to confirm the resolution has been changed

to 1024x768x70Hz.

3. Then type, “reset” to restart the system.

Note : Remember to RESTART the server after these processes.

Note : Remember to RESTART the server after these processes

RKP215 / RKP217 / RKP219 User Manual

Rev. : 1.0

P.15

Print at 8/2004

12. Technical Specification

RKP215 / RKP217 / RKP219 User Manual

*All brand names, logo registered trademarks are properties of their respective owners.

Item

LCD Screen Manufacturer

LCD Origin Panel 15” TFT17” TFT19” TFT Resolution

1,024 x 7681,280 x 1,0241,280 x 1,024

Brightness

300 cd/m

2

350 cd/m

2

500 cd/m

2

Color 16.2 Million16.2 Million16.7 Million Contrast Ratio 450:1350:1500:1 Viewing Angle 140° x 125° 140° x 120° 170° x 170° Display Area 304 x 228 mm337 x 270 mm376 x 301 mm Pixel Pitch 0.297 mm0.264 mm0.294 mm Response Time (Tr) 15ms Response Time (Tf) 10ms

Back Light Horizontal Sync. 48.4 kHz64 ~ 80 kHz64 kHz Vertical Sync. 65 MHz60 ~ 75 Hz60 Hz Input Signal Power Management

Power Input Video Input

Dimension

Weight RKP215 : 12kg / 217 : 13kg / 219 : 15kg

12V DC Adapter 15-pin D-Sub Connector

RKP215 / 217 / 219 : 44.2W x 8.8H x 60D cm

OSD Control

Brightness, Contract, Colour, Clock H.Position, V.Position, Phase, Scaling Auto Config., Input Select, Multi-Window Clear EEPROM, OSD adjust

20ms

4 x Cold Cathode Fluorescent Tube

Analog RGB 0.7Vp-p

VESA DPMS

Description

5ms

15” TFT

South Korea