USER
MANUAL
Widescreen LCD Quad Display
Wide 19”, 22” Screen Size
Widescreen LCD Quad Display
Models
NQW922
NQW819
4:3 LCD Quad Display
17", 19", 20" screen size
Widescreen LCD Drawer
Models
NQW119
4:3 LCD QuaD Display
Models
NPQ817 / NPQ919 / NPQ1020
4:3 LCD Display
Models
NPQ117 / NPQ119 / NPQ120
Options: - DC Power
User Manual
Chapter 1 Getting Started
1.1 Important Safeguards..........................................................1
1.2 Regulatory Notice................................................................2
1.3 Before Installation................................................................3
1.4 Unpacking............................................................................3
1.5 Optional Accessories...........................................................3
1.6 Peripheral Products.............................................................4
Part 1 Widescreen LCD Quad Display
Chapter 2 NQW922 & NQW819
2.1 Package Contents...............................................................5
Chapter 3 NQW119
Chapter 4 LCD Specification...............................................................................................16
Chapter 5 Dimensions……….................................................................................................17
Part 2 4:3 LCD Quad Display
Chapter 6 NPQ817, NPQ919 & NPQ1020
6.1 Package Contents.............................................................18
6.2 Structure Diagram.............................................................19
6.3 Installation.................................................................20
6.4 Connection....................................................................21
2.2 Structure Diagram...............................................................6
2.3 Installation........................................................................7-8
2.4 Connection...................................................................9
3.1 Package Contents...............................................................10
3.2 Structure Diagram...............................................................11
3.3 How to Install “One Man” Installation Slides................12-13
3.4 How to Use the Slides......................................................14
3.5 Connection...................................................................15
Contents
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
Chapter 7 NPQ117, NPQ119 & NPQ120
7.1 Package Contents.............................................................22
7.2 Structure Diagram.............................................................23
7.3 How to Install “One Man” Installation Slides................24-25
7.4 How to Use the Slides......................................................26
7.5 Connection......................................................................27
Chapter 8 LCD Specification...............................................................................................28
Chapter 9 Dimensions……….................................................................................................29
Chapter 10 Operation
10.1 On-screen Display Operation............................................30
10.2 On-screen Menu................................................................31
Chapter 11 Quad Specification
Chapter 12
Chapter 11
11.1 Basic System Connection..................................................32
11.2 Alarm I/O Connection & Operation..............................33-34
11.3 Remote Control Connection & Operation.....................35-39
11.4 Quad Display Connection............................................40
11.5 Quad Display On-screen Menu .................................. 41-43
11.6 VCR Operations.............................................................44
11.7 Quad Display Specification ...............................................44
Options
12.1 DC Power..........................................................................45
Trouble Shooting
Contents
.................................................................................................46
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
1.1 Important Safeguards Chapter 1
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fluctuation or failure.
□ Use of supplies or parts not meeting our specifications.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
1.2 Regulatory Notice Chapter 1
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not liable for
any injury or loss that results from the use of this equipment.
Safety Instructions
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned enviro-
nment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■ When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and
the power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equip ment and invalidate its warranty.
■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
1.3 Before Installation Chapter 1
■ It is very important to locate the Rackmount LCD Drawer / Display in a suitable environment.
■ The surface for placing and fixing the Rackmount LCD Drawer / Display should be stable and level or mounted
into a suitable cabinet.
■ Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt,
heat, water, moisture and vibration.
■ Convenience for connecting the Rackmount LCD Drawer / Display to the related facilities should be well
considered too.
1.4 Unpacking
they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.5 Optional Accessories
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure
Power Cord
1.
1.1 IEC power cord
1.2 NEMA 5-15 power cord (US)
1.3 BS 1363 power cord (UK)
1.4 CEE 7/4 power cord (German)
1.5 AS 3112 power cord (Australia)
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
1.6 Peripheral Products Chapter 1
Item Model No. Description
Matrix Cat6 KVM
Matrix DB-15 KVM
Combo Cat6 KVM
Combo DB-15 KVM
PS/2 DB-15 KVM
Keyboard Drawer
MC0116 / MC0216 / MC0316
MC1116 / MC1216 / MC2116
MC0132 / MC0232 / MC0332
MC1132 / MC1232 / MC2132
Matrix Cat6 16 port KVM
Matrix IP Cat6 16 port KVM
Matrix Cat6 32 port KVM
Matrix IP Cat6 32 port KVM
M018/ M028 / M038
M118 / M128 / M218
M0116 / M0216 / M0316
M1116 / M1216/ M2116
Matrix DB-15 8 port KVM
Matrix IP DB-15 8 port KVM
Matrix DB-15 16 port KVM
Matrix IP DB-15 16 port KVM
NVC800 / NVCCE800 / NVCIP800
NVC1600 / NVCCE1600 / NVCIP1600
NVC3200/ NVCCE3200 / NVCIP3200
Combo Cat6 8 port KVM
Combo Cat6 16 port KVM
Combo Cat6 32 port KVM
NVS801 / NVCE800 / NVIP-802
NVS1601 / NVCE1600 / NVIP-1602
Combo DB-15 8 port KVM
Combo DB-15 16 port KVM
NV401A / NV801A / NV1601A 4 / 8 / 16 port PS/2 DB-15 KVM
Rackmount keyboard drawer (with
NK1
NK2
KVM options)
Rackmount keyboard drawer (short
depth version)
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
2.1 Package Contents Chapter 2
NQW819 & NQW922
1
Rackmount LCD display x 1 pc
2
User manual x 1pc
3
6’ VGA cable (male to male) x 1pc
4
Power cord x 1pc
5
Auto switch power adapter x 1pc
6
M3.2*4.5mm screw x 4 pcs
7
Power adapter bracket x 1 pc
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
2.2 Structure Diagram Chapter 2
RP-W719 & RP-W822
Power adapter bracket installation
1
LCD interchangeable module kit
2
LCD membrane
3
Power adapter bracket
M3.2*4.5mm screw x 4 pcs
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
.
2.3 Installation Chapter 2
NQW819
Figure 1.
Figure 2
■ Install each screws shown in
Figure 1
.
■ Fixed the LCD into the rack.
* M6 screws are not provided.
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
2.3 Installation Chapter 2
NQW922
Figure 3
■ Install each screw shown in
* M6 screws are not provided.
Figure 5.
■ Push the lower part of the LCD into the rack. ■ Installation completed.
.
Figure 3
.
Figure 4
■ Insert the upper part of the LCD display to the rack
.
shown in
Figure 4
.
Figure 6
.
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
2.4 Connection Chapter 2
NQW819 & NQW922
■ Please refer to P.27 - 39
Caution:
devices, such as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging
cables while servers and KVM are powered on may cause irreversible damage to the servers, KVM and
Rackmount LCD Drawer. Before attempting to connect anything to the Rackmount LCD Drawer, we
suggest turning off the power to all devices before connecting them. Apply power to connected devices
again only after the Rackmount LCD Drawer is receiving power. The company is not responsible for
damage caused in this way.
The Rackmount LCD Drawer & Display are hot-pluggable, but components of connected
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
3.1 Package Contents Chapter 3
NQW119
1
LCD drawer x 1 pc
2
6’ VGA cable (male to male) x 1pc
3
User manual x 1 pc
4
Power cord x 1 pc
5
Mounting bracket x 2 pcs
6
M6*15mm screw x 8 pcs
7
M6 cage nut x 8 pcs
8
Cup washer x 8 pcs
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
3.2 Structure Diagram Chapter 3
NQW119
1
LCD interchangeable module kit
2
“One Man” Installation Slides
3
LCD + Quad display membrane
4
Thumb Screw
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
User Manual
3.3 How to Install “One Man” Installation Slides Chapter 3
Install into rack
■ Attach the left and right mounting bracket to
rack 19” mounting rails.
■ Adjust the rear mouting bracket to fit your rack.
■ M6 screw and cup washer x 6 pcs included.
Caution:
until you complete the installation in step
Leaving the screws slightly loose,
■
Pick up the LCD keyboard drawer.
■
Insert the LCD keyboard drawer into the
mounting bracket.
■
Pull and hold the left & right black arrow buttons
on the rails.
■
Return the LCD keyboard drawer to park position.
i-Tech Company LLC TOLL FREE: (888) 483-2418 • EMAIL: info@iTechKVM.com • WEB: www.iTechKVM.com
Loading...