i.Tech MusicBAND 807 User Guide
FRONT
50mm
MusicBAND 807
Bluetooth Headset
84mm
User Guide
Contents
Product Specifications
MusicBand 807 Overview
Getting Started
Charging Your Headset
Indicator Light
Pairing Your Headset with a Bluetooth Mobile Phone
Using Your Headset
Resetting Your Headset / Removing the Pairing History
Declaration of Conformity
4
5
6
6-8
7
8
9-11
12
12
1
2
2 3
3
BACK
Product Specifications
Bluetooth Specification: v2.1 + EDR Class 2
Bluetooth Profiles Supported: HSP, HFP, A2DP, AVRCP
Range of Frequency: 2.4GHz spectrum
Nominal Charging Time: Within 3 hours
Talk Time*: Up to 10 hours
Standby Time*: Up to 350 hours
Dimensions: 56(L) x 15.5(W) x 11(T) mm /
2.2(L) x 0.6(W) x 0.4(T) inch
Weight: 23.5 grams / 0.83 ounces
* may vary due to the user’s habit, different modes of operation, and mobile phone settings.
Charging Your Headset
Indicator Light
Headset Status Status Indicator Light
• Standby
• Charging (OFF MODE)
• Fully charged (OFF MODE)
• Low battery
• Out of battery
• Charging (STANDBY MODE)*
• Fully charged (STANDBY MODE)*
• Out of Range
Use only the supplied charger / USB charging cable to charge the headset.
♦ Charging indication will be delayed for a few seconds if the headset has not been used for a
long time or the battery is drained.
• Flash blue
• Solid red
• The light turns off
• Flash red with short beep every minute
• The light turns off
• Short blue and long red
• Flash blue
• Steady on red for 5 sec with long beep and then
same as standby
MusicBand 807 Overview
6
(fig.1)
1. Multi-function Button (MFB)
2
3
5
4
• Power On / Off
1
• Pair with mobile phone
• Answer / End a call
• Call waiting
• Last number redial
2. Status Indicator
3. Play/Pause botton
• Play and Pause
• Voice Dialing
4. Volume Up / Forward Button
5. Volume Down / Backward Button
6. Micro USB Charging Socketl
Getting Started
To use your MusicBAND 807 Bluetooth headset (“headset”), please follow the steps below:
1. Ensure your headset is fully charged.
2. Pair your charged headset with a Bluetooth-enabled mobile phone.
Charging Your Headset
The headset comes with a built-in
rechargeable battery. Prior to using the
headset for the first time, it is
recommended to fully charge the battery.
Insert the charger’s plug into the headset’s
USB charging socket and plug the mains
charger to an AC wall outlet or plug to the
PC/notebook.
Use only the supplied charger / USB charging cable to charge the headset.
USB Charger
Plug
Charging
Socket
(fig.2)
4 5
Charging Your Headset
♦ 3 hours are required to fully charge the headset.
♦ The headset remains in standby mode after being turned on.
*Warning: Do not use the headset while it is connected to the charger.
Pairing Your Headset with a Bluetooth Mobile Phone
1) Ensure the headset is off.
2) To activate the pairing mode, press and hold the headset’s MFB for 8 seconds without
releasing your finger until its status indicator flashes blue and red alternately.
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “MusicBAND 807”
and enter the passcode “0000”. When the pairing is completed, the headset’s status indicator
will flash blue rapidly 5 times and you can hear a long beep.
If the pairing cannot be completed within 3 minutes after the pairing mode has been activated,
the headset’s status indicator will flash blue rapidly 5 times and you can hear 3 short beeps.
Then the headset turns off. Repeat steps 1 to 3 to pair both devices again.
7 8 9
Using your headset
Function Button Beep / Buzzer Status indictor
POWER ON Press and hold the
When you turn on your headset for the first time, the headset proceeds into pairing
mode, i.e. the status indicator flashes blue and red alternately, so that you can
immediately pair it with your mobile phone.
POWER OFF Press and hold the
Incoming call Ringtone through the
Answer / End a call Press the MFB once
Reject incoming
call*
MFB for 2 seconds
MFB for 2 seconds
Press and hold the
VOL for 2 seconds
Short beep Flash blue light 2 times
Long beep Flash red light twice
earphone and buzzer ON
Short beep
Blinking red
6
Using your headset (cont’d)
Function Button Beep / Buzzer Status indictor
Adjust Volume Press VOL UP or VOL
Voice Dialing* In Any Mode, press and hold
Say the voice tag as soon as you hear the short beep and you must have recorded the
voice tag into your mobile phone.
Call Transfer (headset
to mobile phone)*
Call Transfer (mobile
phone to headset)*
DOWN
Play/Pause for 2 seconds
In Any mode, double click MFBLast no. Redial*
Press and hold the VOL for 2
seconds
Press and hold the VOL for 2
seconds
Short beep at max. and
min. volume
short beep
Using your headset (cont’d)
Function Button Beep / Buzzer Status indictor
Call Waiting allows you to hold up the current caller and pick up the second caller.
To pick second call, press MFB once.
To reject second call, press VOL for 2 seconds.
To terminate current and swap to second call, press MFB once.
Music enjoyment - MusicBand 807 support A2DP* and AVRCP* profiles which let you enjoy and
remote control the music.
Play
Pause
Track forward
Track backward
10
Press Play/Pause once
Press Play/Pause once
Hold VOL UP for 2sec
Hold VOL DOWN for 2sec
* Subject to mobile support
Resetting Your Headset / Removing the Pairing History
You may reset the headset to its default settings. Resetting will also remove the pairing history of your
headset with the mobile phone.
1. During OFF mode, plug charging cable into the charging socket, then hold the VOL UP key until the
headset sounds for 2 beeps.
2. Release the Volume key.
3. The status indicator will return charging mode and the headset is reset.
You may also reset the headset to its default settings by hardware reset.
1. Plug charging cable into the charging socket
2. The headset is reset.
i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to large variability between
different Bluetooth devices from different manufacturers, interoperability between the headset and all
Bluetooth-enabled products is not guaranteed.
Declaration of Conformity
We, i.Tech Dynamic Limited, declare that the following product:
Product Name: i.Tech MusicBAND 807
Model No.: C51-B807-XX
is in conformity with the following essential requirements of Council Directive 1999/5/EC (referred to as R&TTE Directive):
Article 3.1a, 3.1.b and 3.2. and the product is manufactured in accordance with Annex II of the above directive.
A copy of the Declaration of Conformity can be found at http://www.itechdynamic.com.
11 12
S3J-51A807-01-F
Loading...