i.Tech iSlider User Manual
Specifications and Main Features
- Bluetooth profile specifications: Support Bluetooth Headset and Handsfree. Bluetooth specification: v2.0 Class 2.
- Operating frequency: Operates on a range of 2.4GHZ spectrum.
- Recharge provisions - Can recharge the headset within a maximum time frame of 3 hours.
- Time provisions: reasonable talk time of about 4 hours while on a call; standby time of 80 hours.
- Mass dimension specifications - Measures 53.5mm by 20.2mm by 13.2mm.
- Weight is only 9.5 grams.
- Multi function button allows the user to Power On/Off the headset, Pair it with a mobile phone, Answer, end or reject a call, dial back the last called number, send voice norms.
- Volume control - adjusting volume, shift between calls or send transfer calls, mode alerts, sound alert for mode resetting or any other alert changing options.
- External Specification- Incorporates Inline USN charging ports, auditory speaker, retractable lid, built-in microphone, headset with built in rechargeable battery.
Frequently Asked Questions
Q: How do I charge the headset?
A: The headset is charged by inserting the mi charger’s plug with the headset’s USB charging socket and the other plug of the mains charger is inserted in the AC wall sockets. Do not use any other charger apart from the one supplied during the purchase of the product.
Q: What is the maximum talk time and standby time for the headset?
A: Optimal use of the device allows for 4 hours of conversation and up to 80 of standby usage.
Q: What is the procedure of powering the headset on?
A: To power the device on, you have to press and hold the Multi-function Button (MFB) for a period of 2 seconds, and then wait until you hear a short beep sound, with the indicator light flashing blue.
Q: I am unable to connect my mobile phone to the headset, how do I do that?
A: The steps involve first turning off the headset, then continuing to press the MFB key which should turn the status indicator from red to alternately flashing blue, while your phones Bluetooth is turned on, search for devices and choose “i.Slider ” from the available devices, once it gets connected simply type in the passkey “0000” for an easy connection.
Q: Am I able to connect to two mobile phones at the same time?
A: With the Multipoint feature that the headset has, you can comfortably connect to two mobile phones at the same time without any hassle.
Q: If I am unable to hear anything through the headset, what should I do?
A: Make sure that the headset has a good amount of battery and is switched on, when trying to connect with your mobile phone, first ensure that the mobile phone itself is connected.
Q: What is the procedure to reset the headset?
A: In order to reset the headset, first you need to connect it to the charger and hold the volume button for 10 seconds, which should turn the indicator light to flashing purple and red alternately, after that just follow the instructions that come and you will be reset.
Q: Does the wear headset come with a water resistance feature?
A: The internal components and wiring housed within the headset wear remain exposed to enclosed air, preventing it from coming into contact with immersion or absorption, and it is not intended to be used in any underwater environment. Therefore no, the equipment isn't waterproof.
Q: I have an older device that I wish to replace the internal battery on. Is that possible?
A: The answer for that would be a clear no, as electrical devices integrated into it would become unresponsive.
User Manual
Loading...