I-Tech iAP-2000, iNAP-2000, iOP-2000 User Manual

Dedicated LCD display solutions

User Manual

20"

LCD

iAP-2000

Aluminum front bezel

iNAP-2000

Front NEMA4/IP65

iOP-2000

Universal Mounting Open Frame

^

|-T~E^j|"~I

C^DN^RA^TY

i-Tech

F^ (^ REACH

J

Company LLC

TOLL FREE: (888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com

Legal Information

First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■ Unplug equipment before cleaning. Don't use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40° Celsius (104° Fahrenheit),

■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.

■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment's power cord in such a way that others won't trip or fall over it.

■ If you are using a power cord that didn't ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment's electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment's ratings label.

■ Observe all precautions and warnings attached to the equipment.

■ If you don't intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.

■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock.

■ Only qualified service personnel shojld open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.

■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modified or removed.

■ Damage, deterioration or malfunction resulting from: □ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product. D Repair or attempted repair by anyone not authorized by us. D Any damage of the product due to shipment. □ Removal or installation of the product. □ Causes external to the product, such as electric power fluctuation or failure. D Use of supplies or parts not meeting our specifications. D Normal wear and tear. D Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures;

■ Re-position or relocate the receiving antenna

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contents

Part. 1 > iAP-2000 / iNAP-2000

1.1 Package Content P.1

1.2 Structure Diagram & Dimension P.2

1.3 Mounting Hardware & Installation P.4

Part. 2 > iOP-2000

2.1 Package Content P.6

2.2 Structure Diagram & Dimension P.7

2.3 Mounting Hardware & Installation P.9

Part. 3 > Specifications / OSD

3.1 Product Specifications

3.2 On-screen Display Operation (OSD )

Part. 4 > Options

4.1 Option Table

4.2 3G / HD / SD-SDI Broadcast-grade input P.14

4.3 MCS Multi-display control solution

4.4 AV2.2D Upgrade : DVI-D, S-Video + BNC & Audio P.16

AV2.2H Upgrade :

4.5 AV3.0 Upgrade :

4.6 Resistive ( single point touch )

4.7 48V, 24V or 12VDC power P.21

4.8 MIL-type or lockable connector P.22

P.

HDMI, HDMI,

S-Video + BNC & Audio

DVI-D, S-Video + BNC & Audio P.18

P.

10

12

13

15

19

4.9 Quad display for CCTV P.23

4.10 TV (Analog) P.24

Before Installation

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor 4k Caution :

■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or plugging your monitor into an electrical outlet.

■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.

■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the finish.

■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty.

■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps : © Disconnect the power @ Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

cord.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps © Disconnect the power © Spray a small amount of non-abrasive cleanser on a microfiber cloth.

cord.

A Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

** microfiber cloth first, not directly on the parts you are cleaning. ® Gently wipe the surface. Use as little pressure as possible.

@ Wait until your monitor is completely dry before plugging it in and powering it up.

< Part 1 > < 1.1 > Package Content - iAP / iNAP-2000

iAP-2000 / iNAP-2000

20"

LCD display X1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1

Mounting hardware X 1 pack

- Mounting bracket x 4 pcs

- M4* 6mm screw x 8 pcs

- M4* 50mm screw x 8 pcs

Basic I/O

Power

0

AV2.2D upgrade I/O

Audl

Power BNC S-Video

0 © © O O O

AV2.2H upgrade I/O

Power BNC S-Video

0 ®'"

AV3.0 upgrade I/O with advanced features

Power

BNC S-Video

Power

BNC S-Video

0

- An abundance of input connections that include

- On-chip Faroudja® DCDi Cinema processing

- Casing dimensions will be changed

Audl

out -

in

out -

in

Video PC

Audl

O O O HDMI

out -

in -

Video PC

Audio

O

out

O

- in -

- in - Video

Video

0 o

°

- in

°

in

o

in

in PC

PC

HDMI

DVI-0 VGA

FCHFi ■; -:.-,.-.;

DVi-D VGA Power BNC S-Video

l-rim-l

tf■■:■/■:)>

VGA

DVI-D VGA Power

i"i Bid

cfsr m

>

HDMI,

DVI-D, VGA, S-Video + BNC and audio

P.1

<

1.2 >

Structure Diagram

- iAP /

iNAP-2000

Front view

iAP-2000

20"

LCD

Display

(?) Rear case ©

LCD © Protective 3mm glass (4) 6mm aluminum front bazel (5) Audio speaker (D (7) Remote sensor

Model

LCD

panel

membrane

(for

HDMI.

• ©

o v « » * f>

Product Dimension

(W

x D x H)

Audio

or TV

option

——:—i;

.

p

°

•

-—r

Packing Dimension

(W

x D x H)

■*■ ■" I

—r^rr

1: :i _ . _ .

CD

Rear view

;i—^^

•

• *

•

• *

■

Net

Weight

•-©

■J

A W

•

Gross

Weight

IAP-2000

INAP-2000

512.5x72.1

20.2x2.8x15.4 inch

x 391.6 mm

651

x 124

x597

mm

25.6x4.9x23.5 inch

P. 2

6

13.2

kg

lbs

8

17.6

kg

lbs

< 1.2 > Dimension - iAP / iNAP-2000

Front View Side View

T-Q

50.8

Rear View

iAP-2000

iNAP-2000

rxi

411

518.5

488.6

3 s °°°—-

OS

o

co

<*

o>

CO

I

— ]

»7.6

J661

_Z£L

1mm ■

UNIT: mm

0.03937

inch

CO

Bottom View

Czr

40.8I

-» ii i I v ^s- iS

199.3 80

C3

g o o o

396.9

47&5

p

478.5

o ® ©

CO

~t

3

s

< 1.3 > Panel Mount Installation - iAP / iNAP-2000

20"

LCD Display

Mounting bracket

x4 pcs

l£

Hardware set part no. UV-BK#2

Q M4*6mm

screw

x8 pcs

(\ M4*50mm screw

x8 pcs

01

-,

0

'■■■*

p-

r

Steps

■ Install 4 mounting brackets with 8 x M4*6mm screws

■ Adjust the LCD panel with 8 x M4*50mm screws and fix it on the surface.

P.4

< 1.3 > VESA mount Installation - iAP / iNAP-2000

\

M4 screw

100

VESA mount (100*100mm )

I Hardware and M4M pcs for VESA mount are not provided

P.5

< Part 2 > < 2.1 > Package Content iOP-2000

iOP-2000

20"

LCD display X1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1

20"

LCD Display

Basic I/O

Power

0

AV2.2D upgrade I/O

Audl

Power BNC S-Video

@©@ o o o

AV2.2H upgrade I/O

Power BNC S-Video

0 ® © O O O HDMI

AV3.0 upgrade I/O with advanced features

Power 0 BNC

o

- An abundance of input connections that include

- On-chip Faroudja® DCDi Cinema processing

- Casing dimensions will be changed

Audl

out - in - in

Audi

out - in - in

S-Video

© o

out

°

Video PC

° „,

Video PC

Audio

O

o

in

- in-

PC

Video

DVI-D VGA Power

DVI-D VGA

bl BTWlOl l J,

DVI-D VG>

DVI-D

HDMI

o JfUjol

c r\

■;-;-;-;■.

VGA Power BNC S-Video

^

3P

J>

HDMI,

DVI-D, VGA, S-Video + BNC and audio

P.6

< 2.2 > Structure Diagram - iOP-2000

Front view

(T) Rear case © LCD panel (3) Audio speaker (for @ Universal open frame mounting (D LCD membrane (D Extended remote sensor membrane cable

( 66cm from AD board to sensor end )

Model

iOP-2000

HDMI,

Audio or TV option

' ^^^jMj^^^^M

Product Dimension

(W x D x H)

509.5x66.1 x 388.6 mm

20.1 x 2.6x15.3 inch

•

»

)

»

«

I

I 1

1

u

■

Packing Dimension

(W x D x H)

651 x 124 x597 mm

25.6x4.9x23.5 inch

•

-uuu

Rear view

'

—

CC—

Net

Weight

6 kg

13.2 lbs

i

•I

ii

Gross

Weight

8 kg

17.6 lbs

A

9

P. 7

< 2.2 > Dimension - iOP-2000

20"

LCD Display

Front View

31.246.8,2424 35 , 35,43.3,43.3,35,35,24,24,46.831.8

I

1 1 I 1 I 1 I

CO

CO.

in-

I:

8

in

co

in

CO

■ft

co

[

•

<==.

iOP-2000

• £1

4JQ8_

509.5

O C=3 •

w

Side View

•

Ol

•

CVJ

1

•

p

66.1

in

CO

Rear View

1mm ■

UNIT: mm

0.03937

inch

Bottom View

<=>

509.5

396.9

478.5

P. 8

< 2.3 > Installation - iOP-2000

(1 ) Universal mount

*& ...!

2

CO

i

■• w

ft

«:

I

$

a:

I

31246.82

175

(II) VESA mount (100*100mm )

..••--

M4 screw

100 '

Hardware and M4M pcs for VESA mounting are not provided

< Part 3 > < 3.1 > Product Specifications

Mechanical

Design

Front Panel

Rear Casing Black, RAL 9005 VESA Mounting 100 x100mm Other Mounting Panel mount

Protection

20"

LCD Display

iAP-iNAP-2000 iOP-2000

Black, RAL 9005

Black. RAL 9005

Universal mount

3mm protective glass -

-

100x 100mm

LCD

LCD Panel

Panel

Video Connectivity

Manufacturer

Panel Size (diagonal)

Display pixel ( dots x lines ) 1600x1200

Brightness (typ.) 300

Contrast Ratio (typ ) 800 1

Color

Color Viewing Angle (

Response Time ( ms ) 16

Dot pitch ( mm ) 0 255

Display Area ( mm ) 408.00H x 306.00V

Surface treatment Anti-glare, Hard-coating

Surface hardness 3H

Backlight Type CCFL

MTBF ( hrs )

Analog

L/R/U/D

) 89/89/89/89

VGA DVI-D

20-inch TFT color LCD

#LG

16,7 M

45,000

Analog DVI-D,

0.7Vp-p

TMDS single link

Regulatory

Environmental Conditions

Power Supply

Power Consumption

Safety FCC & CE certified

Environmental RoHS2 & REACH compliant

Operating

Storage

Range Screen display ON

Power saving mode Power button OFF 1W or less

Temperature 0 to 50 C degree Humidity Temperature -5 to 60"C degree

Humidity 5-90%, non-condensing Shock 10G acceleration (11ms duration) Vibration

Auto-sensing 100 to 240VAC, 50/60Hz

48W or less 4W or less

20-90%,

5~500Hz1G

non-condensing

RMS random

P.10

Product (W x D x H )

Packing ( W x D x H )

Net Weight

Gross Weight

iAP-iNAP-2000

512.5x72.1 x 391.6 mm

20.2x2.8x15.4 inch 651 x 124x597 mm

25.6x4.9x23.5 inch

6kgs/13.2lbs

8kgs/17.6lbs

iOP-2000

509.5x66.1 x 388.6 mm

20.1 x2.6x 15.3 inch 651 x 124x597 mm

25.6x4.9x23.5 inch

6kgs/13.2lbs 8kgs/17.6lbs

VGA Input

PC Signal

1600 x1200 x60Hz 1400 x1050 x60Hz 1440 x900 x60Hz 1360 x768 x60Hz

1280 x 1024 x 60/75Hz 1280 x960 x60Hz 1280x760x60/75Hz 1152 x864 x75Hz

1024x768x60/70/75Hz 848 x 480 x 60Hz 800 x 600 X 60 / 72 / 75Hz 720 x 400 X 70Hz 640 x 480 X 60 / 72 / 75Hz 640 x 400 X 70Hz 640 x 350 x 70Hz

P.11

< 3.2 > On-screen Display Operation ( OSD )

O Power light

• Green = On

• Orange ■ Power saving

Membrane Switch Function

®

<► <► * *

20"

LCD Display

e

■

4><P<§0

(0>

■^ -.

Power on / off LCD

Display the OSD menu

Scrolls through menu options and adjusts the displayed control (To auto adjustment by pressing the button <jl> for 5 seconds)

Exit the OSD screen Toggle analog, digital & video connection (DVI-D and video options only)

Ven G56SN20SSTD701 1024 x 768

Image

DD

t=—i

'■

■

T

*

m

v

: '

Image

Brightness |^^^^^^

Contrast li^^^^^Hi

Color Temp User

59.8Hz

| SO

| 50

171

OSD Configuration Page

j=j

H

Adjust:** Select** Set: #/fli Exll:t

l|

255

1*1

L

t J

rri

m

IJ>I

Misc

Image:

for :he brightness, contrast, color temp, red, green, and blue for :he brightness, contrast, color temp, red, green, and blue

Geometry:

for :he auto adjust. H position. V position, phase and clock for :he auto adjust. H position. V position, phase and clock

Video:

for '.he colour, tint, sharpness, noise reduction, DCDi and TV Setup for '.he colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio:

for volume, bass, treble, balance, AVL and mute for volume, bass, treble, balance, AVL and mute

Misc:

for the language, OSD position, graphic mode, ratio, reset and timer

< Part 4 > Options

< 4.1 > Option Table

Options iAP / iNAP IOP

SDI ""

HDMI* S-Video * + Composite ( BNC ) Audio Touchscreen MCS multi-display control

DC Power MIL-type / lockable connector Quad display TV (Analog ) *

^4,

or DVI-D

*** About SDI

(1 ) The AD board will be upgraded to version 3.0, and this comes standard with

VGA, S-Video, BNC, audio inputs and RC-1 remote controller.

* About HDMI and DVI-D (1 ) For AV2.2 upgrade, either HDMI or DVI-D is provided.

y y

•

y

y y

y y y y y

y

y y

HDMI,

DVI-D,

( 2 ) If the user needs HDMI and DVI-D, AV3.0 upgrade can be applied.

* Remote Controller (1 ) AV2.2 upgrade comes with RC-1 remote controller.

( 2 ) TV option comes with RC-2 remote controller.

P.13

<

4.2 >

Options : 3G / HD / SD-SDI input

iTechLCDs' SDI input is an ideal solution for the broadcast-

grade video and high resolution CCTV market.

Designed for use with NetView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, iTech LCD provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.

Power

BNC

S-Vldeo

0

©> O O O O

0

©> O O O O

0

©> O O O O

0

©> O O O O

Audio

out - in

Video

,

- in

- in PC

PC

t

HDMI

DVI-D VGA

i°Lffl.fflJ°l <v->

SDI

out

- in

out

- in

out

- in

20"

LCD Display

For SDI option, the AD board will be upgraded to AV3.0, and this comes standard with VGA, S-Video, BNC, audio inputs and RC-1 remote controller ( please refer to will be changed

3G-SDI IN 3G-SDI OUT

Standard Compliance Video SMPTE 425M / 274M / 296M

Standard Compliance

Audio SMPTE 299M / 272M-C

Compatible Video Format

3G-SDI 1080p @60/50Hz,

HD-SDI 1080p

SD-SDI 480i @60Hz, ITU-R BT.656 576i @50Hz,

BNC x 1 / 0.8Vp-p ( 75 ohm ) BNC x 1 /Active through, equalized & relocked

ITU-R BT.656

1080p @30 1080i

@60 /

720p

@60 /

@30 / 25 /

1080i @60/50Hz,

720p

@60 /

/ 25 /

50Hz, 50Hz,

50Hz,

P.

4:2:2

24Hz,

4:4:4 4:4:4

24Hz,

4:2:2

4:2:2 4:2:2

HDMI,

17

). Casing dimensions

/ 125M

4:4:4

4:2:2

DVI-D,

Compatible Audio Format

Max. Transmission Distance

Max. Transmission Distance 75 ohm coaxial cable

75 ohm coaxial cable

3G-SDI 48kHz, 16/20/24 HD-SD! SD-SDI 48kHz. 16/20/24

3G-SDI 150mat2.97Gb/s Max. Transmission Distance

HD-SDI 250mat1.485Gb/s

SD-SDI 480m

48kHz, 16/20/24 bit, 2 CH, Synchronized Video

Asynchronized Video

at

270Mb/s

P.

14

bit, 2

CH, Synchronized Video

bit. 2

CH, Synchronized

/

< 4.3 > Options : MCS

MCS

( Multi-display Control)

Power BNC S-Video

Please download the protocol of MCS control

Audio

[

O O Q HDMI fg^ c|3

int _ in - in L A

out - in - in

Video PC

More control is always good. Especially when it is necessary and easy. iTechLCD provides MCS solution to control the OSD of various NetView LCD display up to 64 units.

The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable,

and daisy chain up to 1,000 meters

Designed for use with NetView LCD displays. iTechLCD provides a MCS input module without using additional space or power and it comes standard with a 2-year warranty.

MCS

DVI-D VGA

llMft

set out in

<£^h

Link

RS-232C

mam

15 feet serial cable

( over 15 feet, extender required )

— »i

LINK

RJ-45 jack

OUT IN OUT IN OUT IN OUT

I

t

Cat5 / 6 cable Cat5 / 6 cable Cat5 / 6 cable

max. 300 meters max. 300 meters max. 300 meters

Set switch For the 1st and last display,

1

I

t I I

Daisy chain up to 1.000

meters and 64 displays

push the set switch upward

For other daisy chain displays, /

push the set switch downward/

,....-•

11 III

111

up to 64 displays

I

i

< 4.4 > Options : 20" LCD Display

AV2.2D Upgrade Options

- DVI-D ( DVI-D TMDS single link )

- AV ( S-Video + Composite, BNC )

- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

I Power BNC S-Video

Audio

_

DVI-D VGA

0 © © O O O

out - in - in

Video PC

AV2.2H Upgrade Options

-HDMI (HDMI 1.1, CEA-861-D)

- AV ( S-Video + Composite, BNC )

- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

Power BNC S-Video

Audl

° —.

|

0 © © O Q O HDMI

out - in - in

Video PC

VGA

*** AV2.2 upgrade option comes with RC-1 remote controller x 1.

P.16

How

o

to

Use RC-1 Remote Controller

©00© 0©©0

©

o

0@00

POWER Sv/itches on or off the TV

©

MUTE Turn on or off the speaker

©

INPUT Switch to signal input mode

©

Select channels. For channel numbers 10 and above.

® 0-9 © V + ©

/-

CH + /-

AUTO For auto searching

© ©

-/.

enter the second digit within two seconds.

Increase or decrease the speaker volume

Increase or decrease the channel number

For setting one or two input digit

or

go to the previous menu

o

< 4.5 > AV3.0 Upgrade Options :

-HMDI (HDMI 1.1.CEA-861-D)

- DVI-D ( DVI-D TMDS single link )

- AV ( S-Video + Composite, BNC )

- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

20"

LCD Display

Power BNC S-Video

© o

***

Casing dimensions will be changed.

Audl

°

O O O HDMI P3J;

out - in - in

Video PC

DVI-D VGA

P.18

< 4.6 > Options : Touchscreen & driver

20"

USB Touchscreen Specification

Model

Technology

Technology Touch Point

Touch Point

Input Type

Input Type Resolution

Resolution

Touch Point Accuracy

Response Speed

Activation Force

Activation Force Surface Hardness

Surface Hardness

Light Transmission

Light Transmission Haze

Haze

Haze Durability

Durability

Top Layer

Bottom Layer

Thickness

Thickness Connector

Connector

Connector Compatibility

Compatibility

TRB

e-Resistive

5-Wire

Resistive

Single

Finger or Stylus

2048 x 2048

- 15 ms ^50g

3H

80%

± 3%

8% ± 3%

10 million touches

ITO Film

ITO Glass

3.2 ±0.2 mm USB Type A

Windows 7 / XP / Vista, Linux

USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc For detailed information, please refer to the attached CD disc

As the touchscreen unit is not made of toughened glass, please handle it carefully

USB Touchscreen

P.19

< 4.6 > Options : Touchscreen & driver

TRB Driver

Please follow the below steps to setup the touch screen:- Step 1. Run the bundled CD disc or download the driver

Step 2. Double click the Setup.exe Step 3. Follow the installation instruction to finish the setup Step 4. After installation, run the TouchKit program & the "4 point calibration"

Please do the initial calibration after the first setup

20"

LCD Display

T"u«-HKit

< 4.7 > Options : DC Power

©©

Model 24V 48V

Input rating

Input voltage: 24-Volt 48-Volt Input range: 18-36V 36 ~ 75V Input current

- No load

- Full load 4880 mA 2442 mA

Output rating

Output voltage: 12-Volt 12-Volt Output current: 8.3A 8.3A

50 mA

Efficiency

85%

86%

< 4.8 > Options : MIL-type or Lockable Connector 20" LCD Display

Input Part no. MIL Standard |

MIL - type Connector

Connector

DC Power *** (Male)

VGA ***

VGA *** (Male )

(Male )

There are several additional MIL DC and VGA connector types with varying design

characteristics to meet cost considerations and to provide users with the most

design flexibility possible. For more information, please contact us.

MS3470W8-33P tfS^Q

MS3470W14-15P

%

MIL -DTL- 26482 MIL - type

MIL -DTL- 26482

Lockable Connector

Connector

Input Part no. Standard |

DC Power ( Male)

USB

*** MIL - type or Lockable connectors above can be integrated with our LCD displays.

Sale service just for connectors not provided.

YM-Ext-461CP001

LUSB-A111 -00

D-type

3W3 Lockable

P.22

< 4.9 > Options : Quad Display

Video IN

RS-232 VCR in

1-4

Alarm I/O VCR out

Video Loop

S-Video

VGA

1 -4

QD Specification

Item

Model Number QD (NTSC) QD (PAL)

Number of Color

Imaging System Resolution Refresh Rate

Video Input

Video Output

Auto Gain Control Time / Date

lay

Camera Title

Display Format

Dwell Time Alarm Inputs Relay Outputs Alarm Hold Time Built-in Buzzer

Key Lock

Camera Input VCR Input

Live Monitor Loop Through Out VCR Output

2 x Zoom On Playback

QUAD FULL SEQUENCY

16.7 M j 16 7 M NTSC PAL

1024x525 1024x625

60 i 50

NO/NC contacts x 1 1A @DC24V Max

Description

1.0

Vpp.

75 Ohm x 4

1 0

Vpp,

75 Ohm x 1

1 0 Vpp,

75 Ohm X 1

1 0 Vpp,

75 Ohm x 4

1.0

Vpp,

75 Ohm x1 Yes

Yes Yes On Screen Disp

Yes

8 Character Title

Yes

Yes Yes

Yes

0 to 99 Sec Adjustable

Selectable NO/NC Contacts x 4

1 Sec to Non-stop

Yes Yes

Yes

Power

***

For QD option, casing dimensions will be changed.

P.23

< 4.10 > Options : TV ( Analog )

Power BNC S-Video

Audio

|f

.—^

out - in - in

Video PC

*** For TV option :

(1 ) The AD board comes standard with

RC-2 remote controller.

( 2 ) Casing dimensions will be changed.

TV

VGA :

<i

■■■••■•

•■•;.0

HDMI,

VGA, S-Video, BNC, audio inputs and

20"

LCD Display

P.24

How to Use RC-2 Remote Controller

O

VOL

O

o

O

© ©

©

(MENUJ

® ®

f \

f/\) £EL=CTJ

© ©

©

a

B

CH

©

ksPECTJ

M0W@

f i-^z \

O © 0 0

^y

(™y x^y W°9

<E)

<D

<£>

©

INPUT Select the source

©

(2)

0

0-9

©

AUTO

©

MENU

©

▲ / T / -4 I ► /ENTER

©

BACK Back to previous value

©

MUTE Turn on or off the speaker

©

Vol + / - Increase or decrease the speaker volume

©

CH + /- Fcr TV model only, increase or decrease the channel number

©

FREEZE Reserve for OEM model

©

-/- Fcr setting input single or double digits

©

ASPECT Adjust the screen size

©

SELECT

©

SLEEP Select the sleeping time

©

EXIT Exit the menu or cancel

©

PIP functions PIP Picture in picture

©

PIP AUDIO To set the audio of

©

POSITION To set the screen position in PIP mode

©

SOURCE PP Source

©

SWAP Swap screen in PIP mode

©

Switches on or off the TV Only use in TV mode Select channels. For channel numbers 10

and above, enter the second digit within two seconds

Auto adjust

Display the menu on the screen or go to the previous menu Go to the upper menu or select the previous value /

Go to the next menu or select the next value / Decrease the setting value / Increase the setting value or enter to the select item setting Enter to the select item settings or excude the setting

To

select the existing item

in

PIP mode

P.25

I-TECH

COMPANY

i-Tech

Company LLC

TOLL FREE: (888) 483-241

8 • EMAIL: info wiTechLCD.com •

WEB:

www.iTech LCD .com

I-Tech iAP-2000, iNAP-2000, iOP-2000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual