I-Tech HNPW719 User Manual

Dedicated KVM switch and rackmount screen technology

r

User Manual 19” High Brightness LCD 1000 cd/m

2

HNPW719

7U Rackmount Display Panel

Options :

-SDI / MCS

-AV / HDMI / Audio

- Touchscreen / DC power

- MIL-type or lockable connector

RS C€ •

i-Tech

Company LLC

TOLL

FREE:

(888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com

Legal Information

First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■ Unplug equipment before cleaning. Don't use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with temperatures not exceeding 40° Celsius (104° Fahrenheit).

■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing damage to other equipment or injury to persons nearby.

■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment's power cord in such a way that others won't trip or fall over it.

■ If you are using a power cord that didn't ship with the equipment, ensure that it is rated for the voltage and current labeled on the equipment's electrical ratings label. The voltage rating on the cord should be higher than the one listed on the equipment's ratings label.

■ Observe all precautions and warnings attached to the equipment.

■ If you don't intend on using the equipment for a long time, disconnect it from the power outlet to prevent being damaged by transient over-voltage.

■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power supply or on other hardware may cause damage, fire or electrical shock.

■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invalidate its warranty.

■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modified or removed.

■ Damage, deterioration or malfunction resulting from: D Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product. □ Repair or attempted repair by anyone not authorized by us. □ Any damage of the product due to shipment.

□ Removal or installation of the product. □ Causes external to the product, such as electric power fluctuation or failure. □ Use of supplies or parts not meeting our specifications. □ Normal wear and tear. □ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

■ Re-position or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contents

> HNPW719

Package Content P.1 Structure Diagram & Dimension P.1 Installation P.3

> Specifications / OSD / Remote Controller

Product Specifications P.4 On-screen Display Operation ( OSD ) P.6

> Options

3G/HD/SD-SDI Broadcast-grade input P.8

MCS Multi-display control solution P.9 AV2.2D Upgrade : DVI-D + VGA + BNC + S-Video + Audio

P.

10

AV2.2H Upgrade : HDMI + VGA + BNC + S-Video + Audio R10

AV3.0 Upgrade :

P.

11 DVI-D + VGA + HDMI + BNC + S-Video + Audio HW19"

Touchscreen : Resistive, Capacitive R12

48V, 24V or 12VDC power R13

MIL-type or lockable connector R14

Before Installation

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

4k Caution :

■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your display. Pressure damage is not covered under warranty.

■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to clean monitors and monitor screens can scratch the LCD display or strip off the finish.

■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly onto the screen or case can cause damage which is not covered under warranty.

■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps : ® Disconnect the power

cord.

® Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps : © Disconnect the power

cord.

^^ Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

•* microfiber cloth first, not directly on the parts you are cleaning.

® Gently wipe the surface. Use as little pressure as possible. ® Wait until your monitor is completely dry before plugging it in and powering it up.

< Part 1 > < 1.1 > Package Content

HNPW719unit X1

- 6ft VGA cable X1

- Power adapter X 1

- Power cord X 1

< 1.2 > Structure Diagram

Front view

Rear view

0 LCD panel

(D LCD membrane

(3) Audio speaker

(4) Power adapter basket

Power adapter

Power cord

DVI-D

Audio

1 1

OO©

out - in - in

Video PC

Power BNC S-Video VGA

HDMI

Bl

Basic I/O AV2.2D upgrade AV2.2H upgrade AV3.0 upgrade Options

DVI-D + VGA DVI-D + VGA + BNC + S-Video + audio HDMI + VGA + BNC + S-Video + audio HDMI + DVI-D + VGA + BNC + S-Video + audio USB for touchscreen & DC power

SDI (AV3.0 upgrade required )

P.1

<

1.2 >

Dimension

Front View

o

in in

OJ

409,5

o

in

CO OJ

o

CO

o

in

CO OJ

o

CO

o

/

A V< >19 0 /

463

480

-*

^-

Side View

58

Bottom View

480

C2J>

©#

o«o© J "»

440

UNIT:

mm

1mm =

0.03937

inch

Model

Product Dimension

(W x D

x H)

Packing Dimension

(W x D

x H)

Net

Weight

Gross

Weight

HNPW719

480x58x310

mm

18.9x2.3x12.2 inch

529 x124 x495

mm

20.8x4.9x19.5 inch

5.8

kg

12.8

lbs

7.9

kg

17.4

lbs

P.2

< 1.3 > Installation

Step

■ Mount the display panel with M6 screw set.

■ M6 screw x 4 pcs required ( Left & right side ).

M6 screw sets are not provided.

>

Step O

Fix the LCD into the rack.

P.3

< Part 2 > < 2.1 > Product Specifications

Panel Size ( diagonal)

19-inch Widescreen TFT color LCD

Display pixel ( dots x lines )

1440x900

Brightness (typ.)

1000

Contrast Ratio (typ. )

1000:1

Color

16.7 M

Viewing Angle (L/R/U/D) 80/80/80/80

Response Time ( ms )

5

Dot pitch ( mm )

0.2835

Display Area ( mm )

408.24HX 255.15V

Surface treatment

Haze 25%, Hard-coating

Surface hardness

3H

Backlight Type

LED

MTBF ( hrs ) 50,000

Video Connectivity

Digital HDMI HDMI

1.1.CEA-861-D

DVI

DVI-D,

TMDS single link

Analog

VGA

Analog

0.7Vp-p Composite ( BNC ) NTSC & PAL S-Video

(4-pin ) NTSC & PAL

Plug & Play

DVI/VGA VESA EDID structure 1.3

Synchronization VGA Separate, Composite & SOG

Audio Connectivity

Audio Input

Connector

3.5mm

stereo jack

Audio Input

Impedance / Power level 30kQ / 750mV

Audio Output

Connector

3.5mm

stereo jack

Audio Output

Resistance / Power level 30kQ / 2.8V

Speaker Output

Power 2x2W

'When the audio output is connected, speaker output is OFF

Power Supply

Range

Auto-sensing 100 to 240VAC, 50/60Hz

Power Consumption

Screen display ON 35W or less

Power Consumption

Power saving mode 4W or less

Power Consumption

Power button OFF

1Wor less

Regulatory

Safety

FCC & CE certified

Environmental

RoHS2 & REACH compliant

R4

Environmental Conditions

Operating

Temperature 0 to 50°C degree

Operating

Humidity

20-90%,

non-condensing

Storage

Temperature -5to60°Cdegree

Storage

Humidity

5-90%, non-condensing

Storage

Shock 10G acceleration (11ms duration)

Storage

Vibration

5-500Hz

1G RMS random

Physical Specification

Product ( W x D x H )

480x58x310 mm

18.9x2.3x12.2 inch

Packing (WxDxH )

529 x 124 x495 mm

20.8 x 4.9 x 19.5 inch

Net Weight

5.8 kgs/12.8 lbs

Gross Weight

7.9 kgs/17.4 lbs

DVI-D/VGA Input PC Signal 1440 x900 x60Hz

1280 x 1024 x 60 / 75Hz 1280 x960 x60Hz

1280x760x60/75Hz 1152 x864 x75Hz 1024x768x60/70/75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz 720 x 400 x 70Hz 640 x 480 x 60 / 72 / 75Hz 640 x 400 x 70Hz 640 x 350 x 70Hz

P.5

< 2.2 > On-screen Display Operation ( OSD )

:= t>

Membrane Switch Function

6

Turn the monitor on or off

DCZI

□

Dl=l

Display the OSD menu Act as an Enter key to select screen setting options

A V < >

Scroll through menu options and adjust

the displayed control

S

Exit the OSD screen

Go back to the previous on-screen sub-menu or

main menu

Remark : All LED touch buttons in WHITE light.

The LED of Power ft touch button will flash continuously when there is no signal input.

(T) All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power @ ).

@ Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power © ).

P.6

< 2.2 > On-screen Display Operation ( OSD )

OSD Configuration Page

Ver: G56SN20SSTD701 1024x768 59.8Hz

Mi

Image

Brightness [1

Contrast J

Color Temp User

Red I^^M

Green [I

Blue J

Adjust: Select: ♦+ Set: ®/i=i

m

Image:

for the brightness, contrast, color

temp,

red, green, and blue

tJ3

Geometry:

for the auto adjust, H position, V position, phase and clock

to-

Video:

for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

J>

Audio:

for volume, bass, treble, balance, AVL and mute

Misc

Misc:

for the language, OSD position, graphic mode, ratio, reset and timer

] 50

0 255

Q 255

Exit: t

P.7

< Part 3 > < 3.1 > Options : 3G / HD / SD-SDI input

iTechLCDs' SDI input is an ideal solution for the broadcast-

grade video and high resolution CCTV market.

Designed for use with NetView Full HD 1080p and ultra high resolution 1920 x 1200 LCD displays, iTechLCD provides a SDI input module without using additional space or power and it comes standard with a 2-year warranty.

DVI-D

Audio

i 1

o o o

out - in - in

Video PC

|°l HfflJoj

Audio

i 1

o o o

out - in - in

Video PC

SDI

Power BNC S-Video VGA

©

out © - in

HDMI

out © - in

P=^fl

ForSDI option, the AD board will be upgraded to

AV3.0,

and this comes standard with

HDMI,

DVI-D,

VGA, S-Video, BNC and audio inputs.

3G-SDI IN 3G-SDI OUT

BNCxI /0.8Vp-p(75ohm) BNC x 1 /Active through, equalized & relocked

Standard Compliance

Video SMPTE 425M / 274M / 296M / 125M

ITU-R BT.656

Standard Compliance

Audio SMPTE 299M / 272M-C

Compatible Video Format

3G-SDI 1080p @60/50Hz, 4:2:2

1080p @30 / 25/24Hz, 4:4:4 1080i @60/50Hz, 4:4:4 720p @60/50Hz, 4:4:4

Compatible Video Format

HD-SDI 1080p @30 / 25/24Hz, 4:2:2

1080i @60/50Hz, 4:2:2 720p @60/50Hz, 4:2:2

Compatible Video Format

SD-SDI 480i @60Hz, 4:2:2

Compatible Video Format

ITU-R BT.656 576i @50Hz, 4:2:2

Compatible Audio Format

3G-SDI

48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video Compatible Audio Format

HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video

Compatible Audio Format

SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /

Asynchronized Video

Max. Transmission Distance 75 ohm coaxial cable

3G-SDI 150mat2.97Gb/s Max. Transmission Distance

75 ohm coaxial cable

HD-SDI 250mat1.485Gb/s

Max. Transmission Distance 75 ohm coaxial cable

SD-SDI

480mat270Mb/s

P.8

< 3.2 > Options : MCS ( Multi-display Control)

More control is always good. Especially when it is necessary and easy. iTechLCD provides MCS solution to control the OSD of various NetView LCD display up to 64 units.

The RS-232C is used for the communication between the PC and the first display via a 15 feet serial cable while the CAN bus is used for the various LCD displays cascade together via CAT 5/6 cable, and daisy chain up to 1,000 meters.

Designed for use with NetView LCD displays, iTechLCD provides a MCS input module without using additional space or power and it comes standard with a 2-year warranty.

HDMI

B O O O ©

Audio

p0Wer

BNC

S-Video

1

out - in - in

Video

PC

•■■•;

VGA

[QLJBJBLH

DVI-D

MCS

m

<£

set out

in

Link

***

Please download the protocol of MCS control

***

For MCS option, casing depth will be changed.

RS-232C

15 feet serial cable ( over 15 feet, extender required )

B

Set switch

For the 1st and last display, push the set switch upward

For other daisy chain displays, push the set switch downward.

'L

A,;.*4

ii §1

LINK

OUT IN

1

t

OUT IN

J

t

OUT IN

I

t

Ol JT

111

Cat5 / 6 cable

max. 300 meters

Cat5 / 6 cable

max. 300 meters

Cat5 / 6 cable

max. 300 meters

RJ-45 jack

Daisy chain up to 1,000 meters and 64 displays

up to 64 displays

P.9

< 3.3 > AV2.2D Upgrade Options :

-DVI-D (DVI-DTMDS single link)

- AV ( S-Video + Composite, BNC )

- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

DVI-D ,

Aud

'° , Power BNC S-Video VGA

c&b

l°n~s]°] O O O C% (8) fft

out - in - in ^ ^=^ ^^ > j

Video PC

< 3.4 > AV2.2H Upgrade Options :

- HDMI ( HDMI 1.1, CEA-861-D )

- AV ( S-Video + Composite, BNC )

- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

,

Aud

'° , Power BNC S-Video VGA HDMI

0 0 0 © 0 ©

ejSb

s

nut -in- in ^^ ^=^ ^e^ 11 A

[i-——wj

out - in - in '^ ^^ ^^ "fc i'" I' ]l

Video PC

P.10

< 3.5 > AV3.0 Upgrade Options :

- HDMI ( HDMI 1.1, CEA-861-D )

-DVI-D ( DVI-D TMDS single link)

- AV ( S-Video + Composite, BNC )

- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

DVI-D , , Power BNC S-Video VGA

out - in - in ^ ^=^ ^^ \, j-

Video PC

HDMI

P.11