i.Tech Clip Music 801 User Guide
Clip Music 801
Bluetooth Headset
User Guide
Contents
Product Specifications ........................................................................................................................................ 1
Clip Music 801 Overview .................................................................................................................................... 2
Getting Started ..................................................................................................................................................... 2
Charging Your Headset ...................................................................................................................................... 3
Indicator Light ...................................................................................................................................................... 3-4
Pairing Your Headset with a Bluetooth Mobile Phone .............................................................................. 4
Using Your Headset ............................................................................................................................................ 5-8
Resetting Your Headset / Removing the Pairing History ........................................................................... 9
Troubleshooting .................................................................................................................................................. 9-10
Safety Information .............................................................................................................................................. 10-11
Care and Maintenance ....................................................................................................................................... 11-12
Declaration of Conformity ................................................................................................................................. 12
Product Specifications
Bluetooth Specification: v2.1 Class 2 + EDR
Bluetooth Profiles Supported: Headset, Handsfree, A2DP and AVRCP
Range of Frequency: 2.4GHz spectrum
Nominal Charging Time: Within 3 hours
Talk Time*: Up to 5.5 hours
Music Playing Time*: Up to 5.5 hours
Standby Time*: Up to 150 hours
Dimensions: 44.2 (L) x 20 (W) x 23.8 (H) mm
Weight: 15 grams
* may vary due to the user’s habit, different modes of operation, and mobile phone settings.
1
Clip Music 801 Overview
1
6
3
1. Volume Up / Forward (VOL UP/FW)
• Adjust volume up
• Reject / Transfer a call
• Track forward
• Last number redial
• Voice dialing
2. 3 individual Status Indicators
3. Volume Down / Backward (VOL DN/BW)
• Adjust volume down
• Reject / Transfer a call
• Track backward
4
2
9
5
7
(fig.1)
4. Multi-function Button (MFB)
• Power On / Off
• Pair with mobile phone
• Answer / End a call
• Play/Pause
5. Microphone
6. USB Charging Socket
7. Built-in Rechargeable Battery
8. 3.5mm audio jack
9. Buzzer
10. Lanyard eyelet
Getting Started
To use your Clip Music 801 Bluetooth headset (“headset”), please follow the steps below:
1. Ensure your headset is fully charged.
2. Pair your charged headset with a Bluetooth-enabled mobile phone.
Charging Your Headset
The headset comes with a built-in rechargeable
battery. Prior to using the headset for the first time, it
is recommended to fully charge the battery.
10
Insert the charger’s plug into the headset’s USB
charging socket and plug the mains charger to an AC
wall outlet or plug to the PC/notebook.
8
Use only the supplied charger / USB charging cable to charge the headset.
USB Charger Plug
Charging
Socket
(fig.2)
Indicator Light
Headset Status
• Standby
• Charging (OFF MODE)
• Fully charged (OFF MODE)
• Low battery
• Out of battery
• Charging (STANDBY MODE)*
• Fully charged (STANDBY MODE)*
• Out of Range
2 3
Status Indicator Light
(Black/Red model)
• Flash blue
• Solid red
• Solid blue
• Flash red with short
beep every minute
• The light turns off
• Double flash red
• Double flash blue
• Solid red for 5sec
Status Indicator Light
(white model)
• Flash white
• Solid green
• Solid white
• Flash green with short
beep every minute
• The light turns off
• Double flash green
• Double flash white
• Solid green for 5sec
Indicator Light
Headset Status
Status Indicator Light
(Black/Red model)
• During Standby mode, only the middle indicator is turn on while in charging mode, all 3
indicators are turn on .
♦ Charging indication will be delayed for a few seconds if the headset has not been used for a long
time or the battery is drained.
♦ 3 hours are required to fully charge the headset.
♦ The headset remains in standby mode after being turned on.
* Warning: Do not use the headset while it is connected to the charger
Pairing Your Headset with a Bluetooth Mobile Phone
1) Ensure the headset is off.
2) To activate the pairing mode, press and hold the headset’s MFB for 8 seconds without
releasing your finger until its status indicator flashes blue and red / white and green light
alternately.
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “Clip Music 801” and
enter the passcode “0000”. When the pairing is completed, the headset’s status indicator will
flash blue / white light rapidly 5 times and you can hear a long beep.
If the pairing cannot be completed within 3 minutes after the pairing mode has been activated, the
headset’s status indicator will flash blue and red / white and green rapidly 5 times and then turns
off. Please repeat step 1 to 3 above to pair the headset and mobile phone again.
Status Indicator Light
(Black/Red model)
Using your headset
Function Button Beep / Buzzer
POWER ON
When you turn on your headset for the first time, the headset proceeds into pairing mode, i.e.
the status indicator flashes blue and red alternately, so that you can immediately pair it with
your mobile phone.
POWER OFF
Incoming
call
Answer /
End a call
When there is 2nd incoming call, press MFB/PLAY can hold the current call and answer the 2nd
incoming call.*
Adjust
Volume
4
Press and hold the
MFB for 2
seconds
Press and hold the
MFB for 2
seconds
Press the MFB
once
Press VOL UP
or VOL DN
(Total 12 levels)
Short beep
Long beep
Ringtone through
the earphone and
buzzer ON
(depends on
buzzer pattern)
Short beep at
max. and min.
volume
Status indictor
(Black/Red model)
Flash blue twice Flash white twice
Flash red
and then
goes off
Flash blue and red Flash white and green
Status indictor
(white model)
Flash green
and then
goes off
5
Using your headset
Function Button Beep /
Voice
Dialing*
Say the voice tag as soon as you hear the short beep and you must have recorded the voice tag
into your mobile phone.
Last no. Redial*
Reject incoming call* Short beepPress and hold the VOL UP
Call Transfer * Press and hold the VOL UP
Call Transfer * Press MFB once
Multi-point allow simultaneous pairing of the headset with two mobile phones, to pair 2
mobile phones:
1. pair your headset with the 1st mobile phone as normal
2. repeat the pairing procedure for the 2
3. re-connect the 1st mobile phone with the headset
when there is incoming call from another phone, press MFB will end the current call and
answer the incoming call
Music enjoyment - Clip Music support A2DP* and AVRCP* profiles which let you enjoy and
remote control the music.
In standby mode,
press VOL UP
In standby mode,
double click VOL UP
or VOL DN for 2
seconds
or VOL DN for 2
seconds
nd
mobile phone
Buzzer
Short beep
Status indictor
(Black/Red model)
Status indictor
(white model)
Using your headset
Function Button Beep / Buzzer Status indictor
Play
Pause
Track forward Hold FW for 2sec
Track backward Hold BW for 2sec
Mobile away alert is an advance feature to alert you when you mobile phone is away by 10
meters. It can remind you not to leave behind your mobile phone in the restaurant or public
place, avoid your mobile phone being stolen. You will hear 20 short buzzers when alert is ON.
Mobile away
alert Enable
(factory preset
OFF)
Mobile away
alert Disable
6
Press once
Press once
Press and hold the VOL
UP and VOL DN
for 2 seconds
Press and hold the VOL
UP and VOL DN
for 2 seconds
Press MFB Stop Buzzer Alert
2 short beep
Short beep
(Black/Red model)
Flash blue twice
Short blue
Flash blue twice
Flash blue twice
Enable: Flash
blue 3 time
Disable: Flash
blue 2 times
Status indictor
(white model)
Flash white twice
Short white
Flash white twice
Flash white twice
Enable:
Flash white
3 times
Disable:
Flash white
2 times
7
Loading...