(Cover)
i.Tech Clip IIIs
User Guide
(Page 0)
Contents
Bluetooth Buzzer Clip Headset……………..………………………………………2
Getting Started………………..……………..………………………………………3
Charging Your Headset…………………………………………………………….4-5
Nominal Charging Time…………………………………………………………5
Talk & Standby Time………………………………………………………….5
Low Battery……………………………………………………………………...5
Turning Your Headset On and Off…………………………………………………….6
Turning the Built-in Buzzer On and Off………………………………………………6
Pairing Your Headset………..………………………………………………………7-8
Using Your Headset………………………………………………………………9-10
Answering a Call…………………………………………………………………9
Answering a Call when Listening to Stereo Audio………………………………9
Ending a Call……………………………………………………………………..9
Rejecting a Call…………………………………………………………………..9
Dialing from Your Mobile Handset……………………………………………...9
Voice Dialing from Your Headset……………………………………………....10
Last Number Redialing from Your Headset……………………………………10
Listening to Stereo Audio fromYour PC………………………………………..10
Adjusting the Volume………………………………………………………………...11
Resetting / Removing the Pairing …………………………………………………...11
Care and Maintenance……………………………………………………………12-13
Safety Information……………………………………………………………………14
Troubleshooting……………………………………………………...……………….15
Product Specifications………………………………………………………………..16
Vo l u m e
Dual LED
Built-in
Buzzer
(Page 1)
Bluetooth Buzzer Clip Headset Overview
Charging SocketMicrophone
Fig. 1
Built-in rechargeable battery
Earpiece Jet and
removable earpiece for
Stereo
Multifunction
Button(MFB)
Earpiece
Getting Started
To use your i.Tech Clip IIIs headset (“the headset”), please follow these simple steps:
Charge your headset
Pair your headset with a Bluetooth-enabled mobile handset
Page 2
Wearing Your i.Tech Clip IIIs Headset as a Mono Headset
Page 3
Charging Your Headset
Fig. 4
The Headset comes with a built-in rechargeable battery. Prior to using the headset, it
is recommendable to charge the battery fully for the first time.
Page 5
Charging Your Headset
Connect the charger to an AC wall outlet and the charger plug to the headset’s
charging socket (fig.4). The LED will be red while charging.
IMPORTANT Charging indication will be delayed for a few seconds if the
headset has not been used for a long time or the battery is drained.
Nominal Charging Time
Charging the battery fully is normally within 3 hours. When the battery is fully
charged, the LED will turn blue and remains on for 30 minutes. Disconnect the
charger from AC wall outlet and the headset. Press and hold the MFB (fig.1) for 2
seconds to turn the headset on, please refer to “Turning Your Headset On and Off” on
the next page.
Talk & Standby Time
The fully charged battery offers up to 6 hours talk time and up to 150 hours standby
time. When no calls are in progress, the headset remains turned on in standby mode.
Low Battery
When the headset is on and the battery becomes low, the
flashes red and the
LED
headset emits a beep every 1 minute. Please recharge the battery as described above.
Loading...