i. Tech Car Kit User Manual
i.Tech i.Carkit Overview
i.Tech i.Carkit
6
Getting Started
To use your i.Tech i.Carkit, please follow these simple steps:
• Start your car’s engine and plug the i.Tech i.Carkit into the cigarette lighter port on the
dashboard (Fig. 2). The i.Tech i.Carkit LED status indicator will automatically light up.
• Pair your i.Tech i.Carkit with your Bluetooth-enabled mobile phone which has headset
or handsfree profiles.
4
5
2
3
7
1
1. Cigarette lighter Plug
2. Speaker
3. Multi-Function Button (MFB)
Fig. 1
4. Volume Button ( )
5. Volume Button (+)
6. Status Indicator
7. Microphone
Turning your i.Tech i.Carkit on and off
Turning On
Press and hold the Multi-function button (MFB) for approximately 4 seconds until you
see the LED flash Blue.
Turning Off
Press and hold the MFB for approximately 3 seconds until you see the LED indicator
flash RED.
Pairing Your i.Tech i.Carkit
Up to 1 metre
NOTE: The i.Tech i.Carkit fits MOST car models. If it does not fit your car model, please
DO NOT force it into the cigarette lighter port.
Remove the i.Tech i.Carkit
To remove the i.Tech i.Carkit, simply do the reverse of Fig.2 above, by pulling the unit
away from your car’s cigarette lighter port.
1
Prior to using your i.Tech i.Carkit for the first time, you must pair it with a
Bluetooth-enabled mobile phone.
The information on the next describes pairing instructions for a typical
Bluetooth-enabled mobile phone. The i.Carkit pairing procedure is subject to
different models of mobile phones.
Pairing Your i.Tech i.Carkit
1. Place the i.Tech i.Carkit and the mobile phone where they are easily viewable and no
more than 1 meter apart.
2. Ensure the i.Carkit is OFF.
3. Press and hold the MFB
4. Activate your mobile phone’s Bluetooth function by referring to your mobile phone
user guide for details.
5. Set the mobile phone to search for Bluetooth devices within a 1 meter range as
instructed in the mobile phone user guide and select “iCarkit” from the list.
6. Enter the preprogrammed passkey “0000” and press “OK” to pair your i.Carkit and
mobile phone. When the pairing is complete, the i.Carkit LED
10 times followed by a long beep.
7. Press MFB
8. Return to your mobile phone’s main menu. For certain mobile phone models, a
headset icon will be shown on the screen. You should now be able to make and
3
receive calls using your i.Carkit.
until the i.Carkit LED alternately flashes blue and red.
once to connect with your mobile phone.
Fig. 2
2
will flash blue rapidly for
4
IMPORTANT
• If the pairing cannot be completed within 3 minutes while the pairing mode is
activated, the adaptor Status indicator flashes purple red with 3 beeps and the
i.Carkit is turned off. Please repeat Steps 2 to 7 to pair the i.Carkit and the mobile
phone again.
• Once a successful pairing has been completed, the i.Carkit will connect to your
mobile phone automatically when you plug it into the car’s cigarette lighter port.
If no connection is established, please reactivate it from your mobile phone or
press the MFB again each time you turn on the i.Carkit to reactivate the pairing.
Then the connection between the i.Carkit and mobile handset is resumed.
Using Your i.Tech i.Carkit
Answering a Call
When there is an incoming call, you will hear ringing through the i.Carkit speaker. Press
(Fig.1 on the product ) to accept the call or answer the call via your mobile
the MFB
phone in the normal way.
Ending a Call
Press the MFB
to end your call or end the call via your mobile phone in the normal way.
Rejecting a Call
To reject an incoming call from the i.Carkit, press and hold the MFB
you hear 2 beeps.
for 1 seconds until
Dialing from Your Mobile Phone
Simply make calls on your mobile phone in the normal way.
Voice Dialling
If your mobile handset is equipped with a voice dialling function, simply hold the MFB
for 1 second on your i.Carkit and when you hear a beep, say the voice tag.
IMPORTANT Please make sure you record a voice tag into the mobile handset first
before using voice dialling function.
Last Number Redialling
Press the MFB
on your i.Carkit once.
IMPORTANT The above functions Call Reject, Call Waiting and Last Number Redial are
only applicable to mobile handsets with Bluetooth Handsfree Profiles. Functionality
varies depending on the mobile handset model you have. Please refer to your mobile
handset user guide for additional information.
5
6
Adjusting the Volume
Press the Volume up and Volume down Key (Fig.1) repeatedly until you reach the
desired volume level.
Care and Maintenance
• Consider turning your i.Carkit off before removing it from your car’s cigarette lighter
port.
• Do not expose the i.Carkit to liquid, moisture or humidity as it is not waterproof.
• Do not use abrasive cleaning solvents to clean the i.Carkit.
• Do not expose the i.Carkit to extremely high or low temperatures.
• Do not dispose of the i.Carkit in a fire as it will result in an explosion.
• Do not bring your i.Carkit into contact with sharp objects as this will cause scratches
and damage.
• Do not stick anything inside the i.Carkit as this may damage internal components.
• Do not attempt to disassemble the i.Carkit as it does not contain serviceable
components.
• If you do not use the i.Carkit for long periods, be sure to store it in a dry place, free
from extreme temperatures and dust.
Safety Information
• Check local laws regarding use of a mobile phone and Bluetooth car kit while
driving. If you use the i.Carkit while driving, ensure your attention and focus remain
on the road and you drive in a responsible and safe manner.
• Never allow children to play with the i.Carkit – small parts may be a choking hazard.
• Observe all signs that require an electrical device or RF radio product to be switched
off in designated areas. These could include hospitals, blasting areas, and
potentially explosive atmospheres.
• Never mount or store your i.Carkit over any air bag deployment area as serious
injury may result when an air bag deploys.
• Do not open or mutilate the i.Carkit.
Troubleshooting
If you are unable to connect your i.Carkit to the mobile phone, please try the
following:
• Ensure you start your engine.
• Ensure the i.Carkit is plugged into the car’s cigarette lighter port.
• Ensure the i.Carkit is paired with your mobile phone, Please refer to your mobile
handset user guide for specific instruction.
• Ensure the i.Carkit is turned on. Please refer to your mobile phone user guide for
specific instruction.
• Ensure the i.Carkit is within a maximum of 10 meters of the mobile phone and there
7
are no obstructions, such as walls or other electronic devices in between.
8
Loading...