i-tec CAMYSAFEDUAL35 User Manual

Page 1
i-tec MySafe USB 3.0 / USB-C External case for 2x 3,5“ SATA HDD, RAID 0/1/JBOD Support
i-tec MySafe USB 3.0 / USB-C External case for 2x 3,5” SATA HDD, RAID 0/1/JBOD Support, USB 3.0 interface, Data transfer rate up to 5Gbps (USB 3.0), Aluminium housing, compatible with Thunderbolt 3
PRODUCT DESCRIPTION
i-tec MySafe USB 3.0 / USB-C External case for 2x 3,5” SATA HDD Drive is an external case for up to two 3.5" SATA HDD/SSD drives to be connected to your PC, laptop or tablet via USB 3.0, or USB-C interface (the USB 3.0 to USB-C and the USB 3.0 to USB 3.0 cables are included). The USB connection offers fast and easy data transfer – up to 5 Gbps. The USB-C interface is compatible with Thunderbolt 3. The rigid aluminium case construction provides efficient heat dissipation and protection for HDD/SSD drives.
One of the greatest advantages of this frame is the support of RAID, which will allow either to set high level of your data protection, or the very high data writing speed, eventually to create huge hard disk unit (consisting of two hard disks. The following RAID possibilities (if two hard disks are used) are available:
RAID 0: very high data writing speed (the frame is able to perform interlaced writing to both hard disks). RAID 1: high data protection level (the frame perform mirroring (it writes the identical data to both hard
disks; in case of failure of one of the hard disk, neither the data nor the access to the data will be lost).
JBOD/Standalone: within the system, the frame is seen as two standalone ones.
In case of problems with the installation, technical difficulties or incorrect function of the equipment, check first for the possible solution in the FAQ tab.
Long product description: i-tec MySafe USB 3.0 / USB-C External case for 2x 3,5” SATA HDD, RAID 0/1/JBOD Support, USB 3.0 interface, Data transfer rate up to 5Gbps (USB 3.0), Aluminium housing, compatible with Thunderbolt 3.
PRODUCT FEATURES
USB 3.0 / USB-C external case for 2 x 3.5” SATA HDD/SSD drives Compatible with all 3.5“ SATA HDD (up to capacity 8 TB) Rigid aluminium design provides an excellent heat removal as well as perfect protection for the hard
i-tec Technologies s.r.o. 1/3 https://www.i-tec.cz
Page 2
disk. Compatible with USB 3.0 and USB-C (both USB 3.0 to USB-C and USB 3.0 to USB 3.0 are included) Transfer rate up to 5 Gbps Easy and safe selection of the RAID level. RAID levels 0, 1, JBOD Power adapter (12V / 4A) Active LED light indicating case status OS – Windows 7/8/8.1/10, Mac OS 10.x and higher, Linux, Android, Chrome Product size 183 x 112 x 64 mm Product weight 482 g Package size 213 x 190 x 70 mm Package weight: 869 g
System requirements
Hardware requirements: PC or notebook with one available USB-C or USB 3.0 port Operating system: Windows 7/8/8.1/10, Mac OS 10.x and higher, Linux, Android, Chrome
Package contents
External case for 2x 3.5” SATA HDD / SSD USB 3.0 cable (80 cm) USB-C 3.1 to USB 3.0 cable (80 cm) Power adapter (12V / 4A) Set of screws for mounting Screwdriver Stand User’s Guide
SPECIFICATION
Part Number Product Description & EAN
CAMYSAFEDUAL35 i-tec MySafe USB 3.0 / USB-C External case for 2x 3,5“ SATA HDD, RAID
0/1/JBOD Support EAN: 8595611702525
Notice: Undefined variable: pnuk_c in /root/dsgen/form.php on line 388
Hardware
Bus type USB-C, USB-3.0
Ports/Connectors
System Requirements
Hardware Hardware requirements: PC or notebook with one available USB-C or
Operating system Windows 7/8/8.1/10 (32/64 bit)
i-tec MySafe USB 3.0 / USB-C External case for 2x 3,5“ SATA HDD, RAID 0/1/JBOD Support EAN: Notice: Undefined variable: eanuk_c in /root/dsgen/form.php on line 390
USB 3.0 port
Mac OS X Chrome OS Linux Ubuntu 14.04/16.04 Android 5 Android 6, 7, 8Windows 10 - Automatic installation of OS drivers. Other operating systems - manual driver installation. Firmware updates automatically.
i-tec Technologies s.r.o. 2/3 https://www.i-tec.cz
Page 3
Other features
Colour Black
Housing Material Aluminium
Product Dimensions 183 x 112 x 64 mm
Product Weight 482 g
Package Weight 869 g
Packaging Dimensions (LxWxH) 213 x 190 x 70 mm
Support
Warranty period 2 years
Technical support lifetime
Package contents
For further information regarding setup or for answers to FAQ’s, please visit our website i-tec.cz. Specifications are subject to change without notice.
Updated 9.1.2019
Powered by TCPDF (www.tcpdf.org)
i-tec Technologies s.r.o. 3/3 https://www.i-tec.cz
Loading...