i-tec MySafe USB-C 3.1 Gen. 2 / USB 3.0, External case for 2x 2,5“
SATA HDD/SSD, RAID 0/1/JBOD Support
i-tec MySafe USB-C 3.1 Gen. 2 / USB 3.0,
External case for 2x 2,5” SATA HDD /
SSD, RAID 0/1/JBOD Support, USB-C 3.1
Gen. 2 interface, Data transfer rate up to
10 Gbps (USB-C) or 5Gbps (USB 3.0),
Aluminium housing, Thunderbolt 3
compatible
PRODUCT DESCRIPTION
i-tec MySafe USB-C Gen. 2/USB 3.0, External case for 2x 2,5“ SATA HDD/SSD Drive is an external case for up to
two 2.5" SATA HDD/SSD drives to be connected to your PC, laptop or tablet via USB-C, or USB 3.0 interface (the
USB-C to USB-C and the USB-C to USB 3.0 cables are included). The USB connections USB offers very fast and
easy data transfer – up to 10 Gbps via USB-C, and up to 5 Gbps via USB 3.0. The USB-C interface is compatible
with Thunderbolt 3. The rigid aluminium case construction provides efficient heat dissipation and protection for
HDD/SSD drives.
One of the greatest advantages of this frame is the support of RAID, which will allow either to set high level of
your data protection, or the very high data writing speed, eventually to create huge hard disk unit (consisting of
two hard disks. The following RAID possibilities (if two hard disks are used) are available:
RAID 0: very high data writing speed (the frame is able to perform interlaced writing to both hard disks).
RAID 1: high data protection level (the frame perform mirroring (it writes the identical data to both hard
disks; in case of failure of one of the hard disk, neither the data nor the access to the data will be lost).
JBOD/Standalone: within the system, the frame is seen as two standalone ones.
In case of problems with the installation, technical difficulties or incorrect function of the
equipment, check first for the possible solution in the FAQ tab.
Long product description: i-tec MySafe USB-C 3.1 Gen. 2 / USB 3.0, External case for 2x 2,5” SATA HDD / SSD,
RAID 0/1/JBOD Support, USB-C 3.1 Gen. 2 interface, Data transfer rate up to 10 Gbps (USB-C) or 5Gbps (USB
3.0), Aluminium housing, Thunderbolt 3 compatible.
PRODUCT FEATURES
USB-C external case for 2 x 2.5” SATA HDD/SSD drives, up to 9.5 mm
Rigid aluminium design provides an excellent heat removal as well as perfect protection for the hard
i-tec Technologies s.r.o. 1/3 https://www.i-tec.cz
disk.
Interface: 1x USB-C Gen. 2, compatible with USB 3.0 (both USB-C to USB-C and USB-C to USB 3.0 are
included)
Transfer rate up to 10 Gbps (USB-C 3.1 Gen.2), or 5 Gbps (USB 3.0).
Easy and safe selection of the RAID level.
RAID levels 0, 1, JBOD
Power supply 5V/2A
Active LED light indicating case status
OS – Windows 7/8/8.1/10, Mac OS 10.x and higher, Linux, Android, Chrome
Product size 130 x 82 x 25 mm
Product weight 180 g
Package size 178 x 141 x 48 mm
Package weight 441 g
System requirements
Hardware requirements: PC or notebook with one available USB-C or USB 3.0 port
Operating system: Windows 7/8/8.1/10, Mac OS 10.x and higher, Linux, Android, Chrome
Package contents
External case for 2x 2.5” SATA HDD / SSD
USB-C cable (45 cm)
USB-C 3.1 to USB 3.0 cable (45 cm)
Power supply 5V/2A
Set of screws for mounting
Screwdriver
Stand
User’s Guide
SPECIFICATION
Part Number Product Description & EAN
CAMYSAFEDUAL25 i-tec MySafe USB-C 3.1 Gen. 2 / USB 3.0, External case for 2x 2,5“ SATA
HDD/SSD, RAID 0/1/JBOD Support
EAN: 8595611702532
Notice: Undefined variable: pnuk_c in
/root/dsgen/form.php on line 388
Hardware
Bus type USB-C, USB-3.0, Thunderbolt-3
Ports/Connectors
System Requirements
Hardware Hardware requirements: PC or notebook with one available USB-C or
Operating system Windows 7/8/8.1/10 (32/64 bit)
i-tec MySafe USB-C 3.1 Gen. 2 / USB 3.0, External case for 2x 2,5“ SATA
HDD/SSD, RAID 0/1/JBOD Support
EAN: Notice: Undefined variable: eanuk_c in /root/dsgen/form.php on
line 390
USB 3.0 port
Mac OS X
Chrome OS
Linux Ubuntu 14.04/16.04
Android 5
Android 6, 7, 8Windows 10 - Automatic installation of OS drivers. Other
operating systems - manual driver installation. Firmware updates
i-tec Technologies s.r.o. 2/3 https://www.i-tec.cz