ITC T-205P, T-206P, T-208P Owner's Manual

OWNER'S MANUAL
Ceiling Speaker
Ceiling Speaker
T-205P/206P/208PT-205P/206P/208P
T-205P/206P/208P
Safety Tips
Readers
Warning
Please be sure to use the former reading detailed notes. Really pay attention to this manual and a safety with the important warning. Recommend that you keep this manual for future reference.
When installed loudspeakers
Definitely will not be allowed to speakers and any exposure in the rain-wet or water, may be inconsistent with ,or fire. Restricted by the provisions of the speakers on the voltage, such as the use of high voltage may cause electric shock or fire disaster. Is no pruning, distorted, or replacement of damaged wires. Avoid instability in the installation or set up speakers, such as shaking the table or flat surface , the speaker can avoid falling caused personal injury or property damage. Speakers will be installed in support of the speaker or the weight of a solid shelf. Speaker swap can be avoided caused personal injury or property damage. Wet hands must not be admitted into or plugs, may lead to electric shocks. The allocation of plugs, make sure that pull plugs, rather than pull wires. The use of a damaged power line of machinery may cause fire or electric shock. Mobile speaker, you plug the prior allocated. If the speaker and plugs may be moving together will cause fire or electric shock.For plugs,identified as plugs for grip. Will not be allowed to speakers on the vent cover. May cause internal heating caused by the fire. Avoid speakers installed in the humidity or dust, direct contact with the sun, from the near-electric, or smoke or steam, may cause fire or electric shock.
Common warning signs and security
The manual shown warning signs and security is to prevent the improper operation due to personal injury arising from the loss of property, please read before using this product must understand that this manual security symbols and Warning to indicate fully aware of potential risks.
Dear customers,your use of the broadcasting company speaker series. We would like to extend my heartfelt thanks to all of the Company manufactured products have been tested before, the commitment to keep its quality. Loud ­speakers broadcast Pan-for hotels, commercial buildings, supermarkets, schools, leisure and entertainment venues, is your ideal choice. For your installation, commissioning and use of this product, the installation please read this note.
Dimension
T-205P/206P/208P
5 213 mm 6 240 mm 8 280 mm
5 135 mm
6 155 mm
7 190 mm
5 135 mm
6 155 mm
8 190 mm
5 213mm 6 240mm 8 280mm
5 213 mm 6 240 mm 8 280 mm
Specifications
Model
Power Taps@100V
Transformer Impedance
SPL(1W/1M)
Input
Freq Response
Weight
Cutout Size
Dimensions
T-205P
2.5/5/10/20W
88dB
70V/100V/8
110-16KHz
180mm
213X135mm
Power Taps@70V
1.25/2.5/5/10/20W
Label stickers
1.9Kg
T-206P
3.75/7.5/15/30W
89dB
100-18KHz
210mm
240X155mm
1.9/3.75/7.5/15/30W
2.1Kg
T-208P
6/12.5/25/50W
90dB
90-20KHz
250mm
280X190mm
3/6/12.5/25/50W
2.8Kg
Installation
Step 1 With measurement tools needed to detect speaker hole, and then open a hole in the ceiling, and then through the open well hole wiring connected to the speaker on.
Step 2 Of the mask opening speaker.
Step 3 Speakers installed in the ceiling and fixed. So close to the edge of the ceiling speakers, rotating clockwise and tighten the screws.
4K /2K 1K /500 /240
2.7K /1.3K 670 /330 /165
1.7K /800 400 /200 /100
70V/100V/8 70V/100V/8
25 mm
50 mm
Model
Power Taps@100V
Power Taps@70V
Impedance
Input
70V/100V/8
90dB
()
SPL1 W/1M
CEILING SPEAKER
Freq Resp
90-20KHz
T-208P
6W/12.5W/25W/50W
3W/6W/12.5W/25W/50W
1.7K /800 /400 /200 /100
25 mm
50 mm
Model
Power Taps@100V
Power Taps@70V
Impedance
Input
70V/100V/8
88dB
()
SPL1 W/1M
CEILING SPEAKER
Freq Resp
110-16KHz
T-205P
2.5W/5W/10W/20W
1.25W/2.5W/5W/10W/20W
4K /2K /1K /500 /240
25 mm
50 mm
Model
Power Taps@100V
Power Taps@70V
Impedance
Input
70V/100V/8
89dB
()
SPL1 W/1M
CEILING SPEAKER
Freq Resp
100-18KHz
T-206P
3.75W/7.5W/15W/30W
1.9W/3.75W/7.5W/15W/30W
2.7K /1.3K /670 /330 /165
T-205P
T-206P
T-208P
Loading...