Italian Shades Poker, Double Installation Instructions Manual

INSTALLATION INSTRUCTIONS POKER OFFSET UMBRELLA

“Italian Shades Corporation” italianshades.com TEL. [phone] Page !1

The Kit contains:

N° 16 bolts M12 X 40
N° 4/4 bolt M 8X90 with nut and
washer
N° 16/16 hexagon screw head bolts
M8X25
N° 24/24 set screw M8X20
N° 4/4 which handle
N° 4/4 which handle M8X25
N° 1 allen wrench 6
N° 1 allen wrench 4

Necessary Tools:

-Ladder

-Leve;

-MM 13 wrench

-MM 19 wrench

INTRODUCTION

Double and Poker models have a specialized blocking system for the canopy, called
“Spherical Joint”, which provides an optimal umbrella’s leveling and prevent
possible breakage caused by wind.

To assure safety in windy conditions, please be sure to tighten
all bolts and screws before using.

INSTALLATION INSTRUCTIONS POKER OFFSET UMBRELLA

“Italian Shades Corporation” italianshades.com TEL. [phone] Page !2

PLACEMENT - Poker and Double models can be mounted with a MM 1200X1200 ballast base fixable to
the ground, or directly to the ground, or with a steel plate.

ATTENTION : VERIFY THAT FLOORING HAS APPROPRIATE MECHANIC CHARACTERISTICS.
THE BALLAST WEIGHT SHOULD BE MORE THAN 320 KG.

Place the base rotated 45°in the direction of the umbrella sides.