Thank you for choosing our 4G LTE PHONE. This 4G LTE PHONE incorporates the
latest world advanced functions, enabling simple and convenient operation,satisfying
your special requirements.
In addition to common multimedia functions this phone also provides you with a
variety of value added functions like WIFI, Bluetooth, hi-speed internet browsing.
With this manual, you can acquire full understanding of the usage of this phone.
Protect our environment! We strive to produce products in compliance with global
environmental standards. Please consult your local authorities for proper disposal.
Note: User’s Manual is used to guide the user about the functionality of the phone.
This does not seem any certificate of technology. Some functions may vary due to
modifications and up gradations of software or due to print mistakes.
5.20 Video player ................................................................................................................. 21
3
Safety precautions
Please read and follow these concise rules carefully to prevent danger or breaking laws.
Driving safety
Do not use 4G LTE PHONE when driving. Use the hands-free accessories if you have to use the phone. Put the 4G
LTE PHONE in the holder, instead of the passenger seat or any place that the phone will fall off.
Power off in aircraft
The interference of 4G LTE PHONE will affect the flight safety and it is illegal to use 4G LTE PHONE in aircraft.
Please switch off you 4G LTE PHONE before boarding.
Power off in the operation area of explosion
Please follow the regulations or rules and switch off your 4G LTE PHONE in or near operation area of explosion.
Power off near dangerous articles
Please turn off your 4G LTE PHONE at gas station or places near fuels and chemicals.
In hospitals
Please follow the regulations or rules of hospitals when you use 4G LTE PHONE there. Switch the device off near
medical equipment. Any wireless device, including 4G LTE PHONE, will interfere with the medical devices which
are not fully protected. Other electronic devices also may be affected. If you have any question, please consult
your doctor or the manufacturer.
Interference
Any 4G LTE PHONE might be interfered with and its performance will be affected thereby.
Professional service
Only qualified maintenance personnel can install or maintain this 4G LTE PHONE. It may cause serious danger
and also violates warranty clauses if you install or maintain the 4G LTE PHONE by yourself.
4
Accessories and battery
Use manufacturer approved accessories and batteries only.
Rational application
Use the 4G LTE PHONE in normal way. Do not put your 4G LTE PHONE in the environment with too high
temperature (higher than 60℃), for example, put it under the window which is irradiated by sunshine directly.
Please use wet or antistatic cloth to clean your phone. Do not use the cloth with static to wipe the phone.
Emergency call
Make sure that the 4G LTE PHONE is switched on and in service area, enter the emergency number (e.g. 110) and
press the Call key to call the number. Report your position and explain your condition briefly. Do not end the call
without permission.
Note: Like other 4G LTE PHONEs, the characteristics of this phone may be not supported because of the network
coverage or wireless signals transmission. Certain networks even don’t support emergency call. Therefore, do not
depend on 4G LTE PHONE only for very important communication (e.g. medical emergency). Please consult your
local network operator.
5
About the phone
Icons
Description
Time display
Alarm
Battery
Signal
Wifi Bluetooth
Music
Message
Downloading
Downloaded
Call Missed call
USB
Limited access
Keys
Functions
Screen home key
Return to the main screen interface;
Side keys
Adjust the volume levels.
Status icons
Icons might be displayed on screen.
Keys functions
6
Power key
Press this key to lock screen;
Long press this key to select silent mode/airplane mode/switch off.
Long press this key to power on the phone when it is off.
Menu key
Open menus in different interface.
Back key
Press this key to go back to last interface.
Getting started
First call
1> Insert the SIM cards (switch off the phone at first). For detailed installation guide, please refer to “Installing
the SIM card”.
2> Charge the battery. Refer to “Battery and charging”.
3> Press and hold the Power key to switch on the 4G LTE PHONE.
4> Enter area code and telephone number in the dial interface and then press the call key to dial out by SIM1 or
SIM2 .
Note: Before using the 4G LTE PHONE, please insert valid SIM cards and charge the battery.
Installing SIM cards
When you register 4G LTE PHONE, You can apply for a telephone number card .
The SIM card saves the parameters required by the communication, and personal information, including PIN
code (personal identity number), contacts, short messages and other system services.
Warning: Do not bend or scratch the SIM card, or contact static, dust or water; if the SIM card is lost, please
contact your network operator. Please switch off the 4G LTE PHONE before installing the SIM card. The SIM
card is inserted into the rear side of the 4G LTE PHONE.
Note: The SIM card is tiny. Please keep it away from children to avoid swallowed. If the SIM card is invalid or
damaged, the phone displays “Insert SIM card”. Switch off the phone and take out the SIM card, and then
re-insert it into the slot properly. If the SIM card is damaged, please contact your network operator. If the SIM
card is locked, please contact your network operator.
7
Installing memory card
Because the mobile space is limited, you may need to install a memory card (SD card).
To install the SD card:Aim the SD card card slot, forward to push the SD card into the card slot to install the
battery after the boot can be read to the SD card and use.
Take out the SD card: sliding backwards can take out the SD card.
Note: SD card is tiny. Please keep it away from children. Please select qualified SD cards, such as SANDISK,
V-DATA, and Transcend. Please match with the 4G LTE PHONE when you purchase the card.
Battery and charging
Installing the battery
Only use qualified battery and accessories. When the battery isn’t used, put it in the protective case.
Note: Please operate according to the instructions to avoid damaging the battery contact.
Charging the battery
The new battery will reach its optimized performance after complete charging and discharging for several times.
Please charge in time when the battery voltage is low. Over discharging will damage the battery. Disconnect the
charger from the AC power supply and the 4G LTE PHONE after charging. While charging, the battery status
icon flashes from right to left, and stops flashing after charging. It is normal that the battery becomes warm in
the charging process.
Battery status
Your 4G LTE PHONE can monitor and display the battery status.
1> You can check the battery status from the icon in the upper right corner of the screen.
2> If the electricity is insufficient, the “Low Battery” prompt shows up. The 4G LTE PHONE sends warning
tone if the “System alert” in Profiles is activated.
3> During charging, the icon of battery status blinks until the charging completes.
Note: The actual standby time and call time depend on the operation, local network, and settings of the SIM
card and 4G LTE PHONE.
Using battery
The performance of the battery is affected by various factors, including wireless network settings, signal
intensity, environment temperature, the function or settings that you select, accessories and the mode of voice,
data or other applications that you select.
To keep the battery in optimum performance, please follow the rules below:
The charging of new battery or batteries which haven’t been used for long time may be longer;
Keep the battery in room temperature when it is being charged;
8
It is normal that the charging time becomes longer after long time using. If the call time becomes shorter and
charging time becomes longer after normal charging, you need to change a qualified battery. Unqualified
battery may damage your phone and cause danger.
If the battery is left unused for too long time or the battery voltage is too low, it takes certain period of time
to display the charging interface normally when the charger is connected.
Note: To protect your safety and the environment, do not dispose the battery randomly.
Warning: The short circuit of battery may cause explosion, fire or body hurt.
▲Precautions of using battery
1> Switch off the phone before removing the battery.
2> Use the battery carefully. It will cause short circuit to connect the anode (+) and cathode (-) of the battery
with metal objects (coin, clip, etc.), and damage the battery and metal objects. When the battery is removed
and put in the bag, do not contact the anode and cathode of the battery with metal objects (e.g. keys).
3> Do not put the battery in fire, or use in any place with high temperature.
4> Do not disassemble or refit the battery.
5> Do not put the battery in the place with strong mechanical impact or break through with hard object.
6> Store the battery in cool and dry place, and avoid high temperature (> 60°C) and direct sunlight.
7> Stop using if there is any particular smell or overheating.
8> Stop using the battery if there is any crack, distortion or electrolyte leakage.
9> If the electrolyte stains the skin or clothes, please wash with soap and clean water immediately; the
electrolyte enters the eyes, wash with clean water immediately and go to see the doctor.
10> Do not use the battery in low temperature, in which the battery can’t get the maximum standby/call time.
11> Do not wash the battery with water or organic solvent, or put it in water.
12> Fully charge the battery if it won't be used for a long time.
13> You are recommended to return wasted batteries to the manufacturer of 4G LTE PHONE or put them in the
specified public recovery area of wasted batteries. Do not put them together with other garbage or dispose
casually.
▲Using 2-in-1 charger (charger + data cable)
The 2-in-1 charger may charge the battery through the 4G LTE PHONE.
1> Connect the data cable and charger
2> Connect the data cable of the 2-in-1 charger to the I/O slot of the 4G LTE PHONE.
3> Connect the charger plug of the 2-in-1 charger to the appropriate power outlet.
4> During charging, the icon of battery status blinks until the charging completes.
5> After charging, the battery icon stops flashing, and you can pull out the 2-in-1 charger.
Note: If the battery voltage is too low and can’t turn on the 4G LTE PHONE, the charging icon may appear on
the screen after several minutes. The 4G LTE PHONE may be turned on or off during charging.
Warning: Make sure that the local voltage and power match the rated voltage and power of the 2-in-1 charger.
Switching on/off
1> Press and hold the Power key to switch on the 4G LTE PHONE. The screen shows the power on video.
2> Access to main screen interface.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.