How it Works
ITALCOM GROUP
Loading...
ITALCOMBLINK
User Manual
47 pgs1.12 Mb0

ITALCOM GROUP ITALCOMBLINK User Manual

User Manual
TELCEL
BLINK
User Manual
User Manual
Contents
1. Appearance and Keypad Operations .............................................................................................. 1
2. Switch your Mobile Phone ON/OFF ............................................................................................. 2
3. Install/Remove the SIM Card and Battery ..................................................................................... 2
4. Install/Remove the Memory Card .................................................................................................. 3
5. Charge the Battery ......................................................................................................................... 4
6. Using Memory Card as U Disk ...................................................................................................... 5
7. Wi-Fi .............................................................................................................................................. 8
4. Bluetooth ........................................................................................................................................ 9
5. Mail .............................................................................................................................................. 10
5.2 Email .......................................................................................................................................... 11
6. Dialing.......................................................................................................................................... 12
7. Messaging .................................................................................................................................... 15
8. Contacts........................................................................................................................................ 18
9. Internet Explorer .......................................................................................................................... 23
10. Recorder ..................................................................................................................................... 25
11. Clock .......................................................................................................................................... 25
12. Calculator ................................................................................................................................... 26
13. Camera ....................................................................................................................................... 27
14. Images ........................................................................................................................................ 31
15. Music.......................................................................................................................................... 34
16. Calendar ..................................................................................................................................... 35
17. FM Radio ................................................................................................................................... 36
18. Settings ....................................................................................................................................... 37
19. Applications for TELCEL .......................................................................................................... 42
20. Notices for the use of phone ...................................................................................................... 43
FCC Caution .................................................................................................................................... 44
User Manual
1. Appearance and Keypad Operations
Keys Functions Home
Menu Press it to open recently opened application window.
Back
Power
Up Down Press it to decrease the volume.
Front camera Entering the camera interface, switched to the front camera can photo yourself.
Press this button to return home from any application or interface. Long press it to open google search.
Press it to return to the previous interface, or to close dialog box /options’
menu/notification panel or the keypad.
Press it to open the phone’s menu，then you could choose to lock the screen、
turn off the phone，or set it to the silent mode .
Press it to increase the volume Press it to turn the phone to vibration mode from the silent mode.
1
User Manual
2. Switch your Mobile Phone ON/OFF
To switch your mobile phone ON, press and hold the Power Key until an animation appears on the
screen. Make sure the battery is charged and inserted properly.
To switch OFF, press and hold the Power Key until a window pops up.
3. Install/Remove the SIM Card and Battery
Make sure to switch off the device and disconnect from charger before installing and removing the SIM
card and battery. To install/remove the SIM card and battery, perform the following:
a. Turn the mobile phone OFF. b. Snap open the phone’s back cover and pull out the battery. c. Carefully insert the SIM card into the SIM card slot, making sure that the card’s gold plate is facing
down and in proper alignment with the phone’s metal contacts.
d. Carefully return the battery into its slot and put the cover back on. Notice: If the screen displays that the SIM card is locked permanently, please consult your network operator.
2
User Manual
4. Install/Remove the Memory Card
The Memory Card is a handy mobile storage device that expands the mobile phone’s storage capacity.
To install/remove the memory card, perform the following:
a. Turn the mobile phone OFF. b. Snap open the phone’s back cover and the SD card lock. c. Carefully insert the Memory Card into the slot, making sure that the card’s gold plate is facing
down and in proper alignment with the phone’s metal contacts.
d. Carefully lock the SD card and put the cover back on. e. To remove, carefully slide the lock and pull the card out of the slot.
3
User Manual
5. Charge the Battery
a. Plug the charger into the electrical outlet. b. Connect the small end of the charger connector into the mobile phone’s charging slot.
The battery indicator icon will flash until charging is finished. When charging is complete, i.e. the battery charging icon stops flashing, disconnect the phone from the charger. Notice:
a. Do not forget to unplug the charger from the electrical outlet after charging. b. Only use approved charger and other accessories. c. You can use the phone while charging, but charging time may increase. When charging the handset
in its Power Off state, a charging indicator will appear on the screen.
4
User Manual
6. Using Memory Card as U Disk
If you want to send music, pictures or other files to the phone’s memory card from the computer，you
should set memory card as u disk first.
Set memory card as u disk
1) Connect the phone to the computer with USB cable. The notification icon will appear in the status
box.
2) Use USB mobile transmission line will connected to the computer
3) In the notification panel, touch USB is connected ，And then touch the USB connected as a media
device
1
2
Specific shown in the following figure (picture 1.2.3.)
3
5
User Manual
Wi-Fi network available
USB debugging connected
USB for file transfer
6
4) Insert the SD Card. Open USB connected.
User Manual
Notice: On the PC operation assistant tool such as mobile phone, Must be open the USB debugging.
7
User Manual
7. Wi-Fi
Wi-Fi provides as far as 300feet (100M) range of wireless network access. If you use cell phone to
connect Wi-Fi, you should connect to the wireless access point or「hotspots」.
Notices：The availability and coverage of Wi-Fi signal depend on the number, infrastructure and other
objects penetrated by the signal.
Open Wi-Fi and to connect to the wireless network
1) Enter settings.
2) Select the Wi-Fi box，to open Wi-Fi. Phone will automatically scan for available wireless networks.
3) Touch Wi-Fi settings. Then a list of Wi-Fi network will show the founded network name and security
settings. (open network or WEP、WPA/WPA2 with password).If you enable the notification in Wi-Fi
settings, The status box will show this icon ( ) when open available wireless network founded.
4) Touch one of the Wi-Fi choices to connect the network. When you choose open network, phone will connect to it automatically. If you choose WEP、WPA/WPA2 with password, you should type the password first, then touch to connect it.
Notices：when the phone is connected to the wireless network,
The status box will show this Wi-Fi icon（）, and the approximate signal strengthen (the number of
lit bars).If touch the connected network，will display the name of Wi-Fi network, status, speed, signal,
strength, security, information and IP address.
If you want to delete the wireless settings, please touch “not reserve” as in the right picture. If you want
to connect to this network, you should re-enter these settings.
Notices：
Unless you choose not to reserve the network, otherwise, there is no need to re-enter the corresponding password when next time connecting to the previously encrypted wireless network. Wi-Fi will search automatically, that is, phone needn’t to perform additional steps to connect Wi-Fi networks.
Notices：
Unless you choose not to reserve the network with password, otherwise, there is no need to re-enter the corresponding password when next time connecting to the previously encrypted wireless network. Wi-Fi will search automatically, that is, phone needn’t to perform additional steps to connect Wi-Fi networks.
8
User Manual
Connect to other Wi-Fi networks
In the interface of wireless and network, touch Wi-Fi settings. The founded Wi-Fi networks will show on the Wi-Fi network list.
Touch other Wi-Fi networks, and then you can connect to this network.
Notices: in addition, mobile phone can also surf the Internet by GPRS. Our current SIM card GPRS to open after the default boot. Users can manually choose to open data connection, when for the single card, direct drop down the status bar, touch "data connection" is open, when for the card, location in "Settings > SIM card > cellular data > select SIM1 or SIM2", touched the drop-down "data connection" of the status bar is open the current selected SIM card data connection, and then touch "data connection" close this SIM card data connection..
4. Bluetooth
Turn on Bluetooth or set the phone can be detected
1) Enter settings.
2) Select Bluetooth box, then open bluetooth box, the status box will show this icon ( ), then it
starts to scan for all devices within range.
3) Touch Bluetooth settings, all the devices founded will display in the list under the icon.
(Bluetooth device is set open and visible to a nearby equipment work, other equipment as long as open the Bluetooth can search to the Bluetooth and matching, open as long as the other devices can be detected at the same time, you can search for other equipment and matching use)
After a paired devices, the system will show the paired and other equipment available
9
User Manual
Pairing and connection of Bluetooth headset
1) Enter settings.
2) Select Bluetooth box, then open Bluetooth box, then your phone will scan for the Bluetooth devices
within range, and show the founded devices in the list under the icon.
Tips：
If the list can’t find your equipment, touch scanning equipment to re-scan it.
Make sure that the devices wanted are under the detected mode.
3) Touch headset in the equipment list to finish the connection.
Notices：generally Bluetooth devices need password to be paired, often use「0000」as the default password.4)The pairing and connecting status will show under the headset in the Bluetooth devices list.
When the headset connected to your phone, the status box will show this icon（）means connected. Then you can use the headset to make or receive callings.
Cut the connection to the Bluetooth
Press settings>Bluetooth.
In the list of Bluetooth equipment, touch or tap and hold the connected hand-free headset.
Press and select “cancel the pairing”.
Bluetooth proximity sensor
After pairing the two device, you can test out the signal is strong or weak by the Bluetooth proximity sensor device
5.Mail
5.1 Gmail
1) Create an electronic mail account Open Gmail, You can activate or edit existing e-mail accounts as well as create a new e-mail
account.
Select mail, Google account setting interface appears. Then touch‘next step’ > create
account>enter name，last name and e-mail account.
Google servers determine whether the name can be used, if so, new interface appears prompting enter password, then judge the password’ security, users who doesn’t meet the requirements need to re-enter the password.
Successfully register a new Gmail account, a messenger created automatically for testing.
2) Loading mail account
a. Open Gmail skip introduction screen>loading interface appears >select load
b. Enter name, password then load
E-mail account initialization, prompting “login successful” All Google accounts will be
synchronized.
3) Creating and sending mails
When creating mails, select mail > creating mails. Enter the address(recipient)、theme and contents. Press MENU you could ‘append’、‘Add Cc/Bcc’, select send or discarded.
10
User Manual
4) Receive mails
There is tone for new mails, in the status box will show this button ， Press Menu >‘refresh’， refresh and update the number of the unread mails in a proper way.
5) Delete mails
When loading a mail account，if you want to delete it，you need to restore factory settings . When loading a second one，you could press the menu button to delete it.
Notices：many functions depend on Gmail Account，for example：Electronic Market、Google Talk、 Sync Contact and Calendar.
5.2 Email
Load Email.
a. Open network connection，
b. In setting the account interface, input the correct email address and password and click next mobile phone automatically complete the sending and receiving server Settings. Pop-up mail find frequency, and user Settings interface, complete Settings, click next.
c. For account creation name, the editor of the law that email user name, and click next. Complete set, synchronous mailbox.
Create and send Email
When creating mails, select mails > create mails. Enter the address(recipient)、theme and contents. Press MENU you could ‘append’、‘Add Cc/Bcc’, select send or discarded or save as draft.
Check the Email files Click the inbox to the left of the small buttons, list all the folder options
11
User Manual
6.Dialing
When the icon of network server appears in the screen, you could dial or receive callings. The signal
bar on the top right corner show the strength of network signal (When the signal with the strongest signal)
Start dialing Open application’s main menu>dial >Dial the keyboard. You could choose SIM1 or SIM2 to do the
dialing.
Dialing
At the dialing Keyboard ，enter the phone number，and then click the dialing key, after that, you should choose one SIM card or internet call. If needed to call the extension, you could click the “dial pad” in the bottom of the screen to open the interface or press menu key to select “delay 2 seconds”，and then enter the number of the extension.
The dialup keyboard input number, click Menu can IP dial-up or speed dial
Video call: video call usually refers to the Internet and mobile Internet based on (3G Internet) end, through the phone between the speech of the real-time transmission and image (user of bust, photographs, items, etc.) of a way to communicate. Only 3G to support this function. Input a number click video dial-up, each other answers the phone after both can through camera for video calls.
Telephone calls in the call log
Every telephone number called and received in“SIM1、SIM2”will reserved in phone’s menu of call log. Each call to record recently will show“SIM1 or SIM2”
All numbers in the call log can be dialed by clicking the button ”dial” on the right side of the screen.
When number list appearing，click it to catch details；press it for long you could dial via “SIM1 or SIM 2”，meanwhile you can edit, delete, save the number or do other operations.
12
User Manual
Receive callings
When calling comes（top left will show from which SIM card）press“Answer”and slide towards right until the middle button, then you can receive callings.
Refuse to answer the phone,
Have a telephone call in, hold down the "call" button to the left sliding contact can decline a call.
Have a telephone call in, hold down the "call" button sliding upwards to contact messages can be resisted. Choose reject content, the other phone, will receive the corresponding text messages.
Proximity sensor
According to the distance between phone and human body，it will adjust automatically the switch of the backlight.
During the call, close the phone to the ear, the backlight will turn off automatically，which could save batteries and prevent inadvertently touching.
Refuse to answer the phone
When standby, calling comes，press “refuse”button and slide towards left side until the middle button, then you could refuse the calling.
When using, calling comes, click on the “refuse” button to refuse the calling.
Two-way call/multiparty call (conference call)
Notices：this function needs that SIM card open multiparty call features.
Already exist a call in the phone
Click“Add calls”，dial another call（or receive another call，phone default open ”call waiting” （settings–dialing settings–other dialing settings），after both connected，could view the status of calling.
13
Loading...
+ 32 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use