it ITGSH-150 product manual

Product Manual

ITGSH-150

Wireless Hi-Frequency

Headphone

ITGSH-150 - The Wireless Hi-Frequency Headphones are designed for
TV, music and other audio/video devices. The user can now listen at
their own preferred volume without disturbing others. This headset
provides a clear signal up to 24 feet within direct sight of the transmitter
via infrared technology - so you can hear the TV, DVD’s, CD’s, VCR
Tapes or Radio programs.

IMPORTANT SAFETY INSTRUCTIONS:

To achieve the best quality from this product, please read this manual
carefully before operating. Please keep this manual for future reference.
When using this unit, basic safety precautions should be followed to avoid the
risk of electrical shock or personal injury. Please refer all servicing to qualified
personnel ONLY! Do not attempt to repair/open the product!

1

THIS PACKAGE CONTAINS:

1 x transmitter
1 x headset receiver
1 x AC/DC adapter 15V 200mA (center negative)
1 x 3.5mm – 2-RCA audio cord

1 x instruction manual
2 x 80mAH Ni-MH rechargeable batteries
2 x rubber ear pad

TECHNICAL SPECIFICATIONS:
Transmitter:

Single Channel 2.3/2.8MHz High Frequency Infrared
Stereo or mono mode of operation
RCA audio in or 3.5mm audio in
Rechargeable battery dock for 2nd battery
Power supply: AC/DC adapter AC120V 60HZ, DC15V 200mA
Dimension:90 x 150 x 20mm

Receiver:

Single Channel 2.3/2.8MHz High Frequency Infrared
Volume control (on the under chin headphone)
On/Off switch incorporated into the volume knob
Battery compartment for 80mAH Ni-MH rechargerable battery
Replaceable ear buds
Power supply: 80mAh Ni-Mh rechargeable battery
Dimension: 142 x 205 x 20mm

2

figure 3

figure 5

figure 1

figure 4

INSTRUCTIONAL PHOTO REFERENCE:

(Step-by-step instructions are on page 3)

Correct Battery Installation in
the Transmitter

Correct Battery Installation
in the Headphones

2 LED’s show the unit is charging.

figure 2