isvi IC-X25S-CXP Operation Manual

Operation Manual

IC-X25S-CXP

High-Speed High-Resolution Camera Technology

Revision 1.0

IC-X25S-CXP

2

High-Speed High-Resolution Camera Technology

Revision History

Revision Date Description

1.0 28.01.2016 Initial Release

IC-X25S-CXP

3

High-Speed High-Resolution Camera Technology

1. Introduction

Thank you and congratulations for purchasing the ISVI IC-X25S-CXP (hereafter referred to as
“camera”). We have designed this camera to provide outstanding imaging performance and give you
years of reliable service. As you become familiar with the camera, you will appreciate the high quality
of its production and the excellence in its engineering design.

Please read and fully understand the entire manual before proceeding to operate your camera!

Intended Use Statement

This camera is a highly sophisticated electronic image capture device designed for use in industrial
machine vision systems.

The intended use and safe operation of the camera shall not be interfered with, even by unforeseen exter­nal forces. Intended use and safe operation of the camera shall be carried out only by qualified technicians
trained in the installation and operation of electronic image capturing devices, accident prevention and
common safeguards for handling sensitive electronic devices. Operating the camera for any purpose
other than the stated intended use or by unqualified personnel may result in personal injury or property
damage for which the manufacturer assumes no liability.

Limitation of Liability and Indemnity Statement

This camera has been built to the high quality standards of ISVI Corp. and is delivered in full working order
with factory default settings. Please read and understand this manual and follow all safeguards and
cautions for your safety and to prevent damage to the camera. Please do not attempt to install this camera
without adequate training and knowledge of this specific camera. Any use or operation, modification or
repair in contravention of this document is at your own risk and will immediately void the user’s warranty.
By acceptance of this camera you hereby assume all liability consequent to your use or misuse of this
camera.
To the maximum extent permitted by applicable law, ISVI Corp. shall not be liable for any damages
suffered as a result of using, modifying, contributing, copying, distributing, or downloading the materials,
use of the camera operation manual or use of any ISVI product and/or software. In no event shall ISVI be
liable for any indirect, extraordinary, exemplary, punitive, special, incidental, or consequential damages
(including, without limitation, loss of data, revenue, profits, use or other economic advantage) however
arising, whether for breach or in tort, even if ISVI has been previously advised of the possibility of such
damage. You agree that you have sole responsibility for adequate protection and backup of data and/or
equipment used in connection with the product and software and will not make a claim of any nature
against ISVI for lost data, inaccurate output, work delays or lost profits resulting from the use of any and
all ISVI products and materials . You agree to indemnify, hold harmless and defend ISVI, together with its
affiliates, parent and subsidiary entities, successors, assigns, partners, managers, members, employees,
officers, directors and shareholders, from and against any and all damages, liens, liabilities, losses,
demands, actions, causes of action, claims, costs and expenses (including, without limitation, reasonable
attorneys' fees, charges and disbursements, as well as the cost of in-house counsel and appeals) arising
from or related to ISVI, the use of this Operation Manual or any ISVI product and/or software.

Camera specifications, documentation, software applications and options are subject to change at any
time and at the sole discretion of ISVI Corporation without notice.

1.1. Statement of Intended Use and Liability

IC-X25S-CXP

4

High-Speed High-Resolution Camera Technology

The following precautions must be heeded to avoid personal injury and damage to the
camera and/or supporting equipment.
Failure to comply with any of the following precautions will void the user’s warranty.

DO NOT attempt to disassemble, modify or repair the camera. Please contact your local ISVI Global
Sales Partner if you require repair or modification.

DO NOT short circuit any output or input signals.

DO NOT allow high-voltage or electrostatic discharge to come into contact with the camera. The
camera should be unpacked and handled in a clean, ESD protected workspace.

DO NOT operate the camera with any other voltage than is specified in this operation manual.

DO NOT expose the camera to electromagnetic fields. Image quality will degrade and, if strong
enough, damage to the camera may occur.

DO NOT allow direct laser beams, direct sunlight or other high-intensity light to project directly onto
the imaging sensor.

DO NOT expose the camera to temperatures and humidity levels outside of those specified in this oper­ations manual.

DO NOT install the camera in a tightly enclosed space without ensuring proper heat dissipation and
adequate ventilation.

DO NOT allow condensation to form on or in the camera and DO NOT allow the camera to come into
contact with any liquids, cleaning agents or solvents. Should the camera require cleaning, then only
with a clean, lint-free cloth.

DO NOT expose the camera to shock and vibration levels outside of those specified in this operations
manual.

DO NOT allow foreign objects or particles to enter the camera. Immediately install the camera lens
mount cover when lens is not mounted. When installing lenses, ensure that they are clean and they are
not cross-threaded, tilted or otherwise damaged. Contamination of the optical path/sensor may occur
and/or removal of the lens may become impossible. Installation of a lens should take place in a clean
environment to avoid airborne contamination of the optical path.

DO NOT attempt to clean the camera’s optical path yourself. Any damage to the optical path occurring
from the user’s attempt at cleaning it will void the warranty. If the optical path becomes contaminated,
then please contact your local ISVI Global Sales Partner for assistance.

DO NOT apply unnecessary pressure or stress on the camera’s cable connectors or pull or damage the

camera cables.

DO NOT use mounting screws longer or with different thread pitch than specified in the operation
manual.

1.2. Precautions

IC-X25S-CXP

5

High-Speed High-Resolution Camera Technology

CE marking and certification

(as per EN 55022-Class A Device)
The CE mark is a declaration by a manufacturer that European Union directives
and regulations controlling a specific product have been certifiably met.
This camera fulfills the requirements of current EU regulations relating to EN

55022. A corresponding declaration of conformity and documentation are
available upon request.

1.3. Standards Conformity

Federal Communications Commission (FCC / USA and Canada)

This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment gener­ates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the Operation Manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense. Camera complies with FCC Form
47 Rules.
Changes or modifications to this unit not expressly approved by the part
responsible for FCC compliance could void the user’s authority to operate the
equipment.

Restriction of Hazardous Substances (RoHS).

The EU Directive 2002/95/EC Restriction of Hazardous Substances (RoHS) has
been in effect since July 1, 2006 and has been revised in 2011. The changes to
Directive 2011/65/EU, also known as “RoHS II” will slowly take effect over 6
years. This directive restricts the use of six hazardous materials in EEE products.
This camera meets the current requirement for RoHS compliancy.

1.4. Ordering Information

I C - X 2 5 S - C X P - X X X

Lens Mount**

42 = M42x1.0
58 = M58x0.75
72 = M72x0.75

B =

BBAR*

I = IR-Cut*

Filter**

*

Monochrome stand ard with BBAR filter, Color standard with IR-Cut.

LM = Leica - M

*

Custom OEM available

*

N = None

Chroma

N =

Ext.NIR

C =

Color

M =

Monochrome

FM = F Mount

IC-X25S-CXP

6

High-Speed High-Resolution Camera Technology

Contents

1. Introduction ....................................................................... 3

1.1. Statement of Intended Use and Liability ........................................................ 3

1.2. Precautions .................................................................................................. 4

1.3. Conformity .................................................................................................... 5

1.4. Ordering Information ...................................................................................... 5

2. Overview ........................................................................... 9

2.1. Main Features ............................................................................................... 9

2.2. Specifications .............................................................................................. 10

2.3. Sensor spectral sensitivity .......................................................................... 10

2.4. Mechanical dimensions ............................................................................... 11

3. Installation ....................................................................... 16

3.1. Mounting the camera ................................................................................... 16

3.2. Thermal management .................................................................................. 16

3.3. Mounting a lens ........................................................................................... 16

3.4. Camera connections ................................................................................... 17

3.5. Trigger input schematic ............................................................................... 19

3.6. Strobe output circuit ................................................................................... 20

4. Image Acquisition ........................................................... 21

4.1. Overview ..................................................................................................... 21

4.2. Continuous .................................................................................................. 21

4.3. Trigger Timed .............................................................................................. 22

4.4. Trigger Width ............................................................................................... 23

5. Camera Features ............................................................ 24

5.1. Overview .................................................................................................. 24

5.2. User Level ................................................................................................... 24

5.3. Feature Description Table ............................................................................ 25

IC-X25S-CXP

7

High-Speed High-Resolution Camera Technology

6. Communication / Command codes ............................... 32

Bootstrap .......................................................................................................... 32

5.3.1 Device Control ........................................................................................... 25

5.3.2 Image Format Control .............................................................................. 26

5.3.3 Acquisition Control ................................................................................... 27

5.3.4 Digital IO Control/Analog Confrol/Fan Control/User Set Control ................. 28

5.3.5 User Set Register/Transport Layer Control/CoaXPress ............................... 29

5.3.6 Calibration ................................................................................................. 30

5.3.7 Point Defective Pixel ................................................................................. 31

IC-X25S-CXP

8

High-Speed High-Resolution Camera Technology

IC-X25S-CXP

9

High-Speed High-Resolution Camera Technology

2. Overview

2.1. Main features

25 MP High-Performance CMOS

5120 x 5120 Pixels

4.5 µm² pixel size

72 fps

Global Shutter

8Bit Output

CXP-6 DIN-4 CoaXPress 1.1 std. certification

GenICam XML SFNC conform

Monochrome. Ext. NIR or Bayer Color

DSNU and PRNU Correction

Defect Pixel Correction

2 User Areas for Calibration Storage

Exposure Delay

Strobe Out Delay

Programmable ROI

Compact Size - 80 x 80 x 36.55 mm

F-Mount, M58, M42, M72, LM Lens Mount

High-Precision Mounted Sensor

The ISVI IC-X25S-CXP cameras are industrial area scan cameras utilizing the latest ON-SEMI VITA25K
global shutter CMOS sensors and the highly successful CoaXPress high-bandwidth digital interface.
The camera is available in 8-bit monochrome or 8-bit raw Bayer color versions which deliver high-sen­sitivity and high-dynamic images at very high frame rates. Its flexible acquisition modes include Con­tinuous, Trigger Timed and Trigger Width. It also has a rich feature set making the camera adaptable
to any application environment.

The IC-X25S-CXP cameras combine high dynamic range, high frame rate, high-resolution and a com­pact, robust form factor to provide the highest possible performance for the most demanding appli­cations. The IC-X25S-CXP is suitable for a wide range of application areas including Factory Automa­tion, Bio-Mechanics, Automated Digital Pathology, High-Speed Event Recording, Metrology,
Large-Scale 3D Imaging, AOI, Flat Panel Inspection, LED Inspection, Print Inspection, Intelligen

t

Transportation Systems, Aerial Mapping, Aeronautics, Defense and more.

IC-X25S-CXP

10

High-Speed High-Resolution Camera Technology

2.2. Specifications

2.3. Sensor spectral response (Quantum efficiency)

Resolution
Pixel Size

Active Area Size
Output Format

Dynamic Range

CoaXPress Interface

Full Well Capacity
SNR

Exposure Mode
Exposure Control
Trigger Control

Analog Control
Digital Control

Special Functions

Image Control

Lens Mounts
Operating Temperature

Relative Humidity
Shock / Vibration
Power Requirements
Power over CXP
Dimensions (H x W x L)

Weight
Compliancy

Sensor

Storage Temperatur e

All specifications subject to change without notice. Please visit our website for the latest documentation.

Sensitivity

Frame Rate

CXP-3, CXP-6 : 1, 2 and 4 Links, GenICam XML

8Bit Monochrome, Ext. NIR and Raw Bayer RGBG

Programmable Region of Interest
F-Mount, M42, M58, M72, LM(Leica M), Custom OEM
0℃ to +40℃, ext. temp. possible with reduced performance

20% - 90% non-condensing
25G (Half sine 6-10ms XYZ) / 10G (5-150Hz, 1min, XYZ)
24VDC ± 10%, 18W, ≤ 50mV Ripple
PoCXP: 24VDC @ 18W, min. required CXP Links = 2 ch (CXP1,2)
80mm x 80mm x 36.55mm without lens mount and connectors
400g (without lens mount), 540g (including F-Mount)

CoaXPress 1.1, GenICam SFNC, RoHS, CE, FCC

High Speed CMOS Image Sensor - ONSEMI VITA25K
5120(H) x 5120(V) Active Pixels

4.5µm(H) x 4.5µm(V)

Diameter 35mm, 23.04mm(H) x 23.04mm(V)

56.2dB

43.4dB

22000 e

-

Continuouse-Trigger Timed - Trigger Width
Programmable from 1 µsec to 10 sec in 1 µsec steps

Programmable Period in 1 µsec steps, External PWC
Black Offset 0-127
Digital Gain 0-4096, Gamma, Programmable LUT
DSNU & PRNU Correction, Defect Pixel Correction
Programmable Exposure Start Delay
Programmable Strobe Pulse Start Delay

-10℃ to +70℃

18LSB10/nJ/cm^2, 3/4V/lux.s

72Hz @ 8bit CXP-6 4CH (13556µsec)

IC-X25S-CXP

11

High-Speed High-Resolution Camera Technology

2.4. Mechanical dimension

Figure 2.1 Mechanical dimensions (F Mount)

F Mount

IC-X25S-CXP

12

High-Speed High-Resolution Camera Technology

Figure 2.2 Mechanical dimensions (M42 Mount)

M42 Mount