How it Works
iStartek
Loading...
VT900-E
User Manual
27 pgs1.58 Mb0

iStartek VT900-E, VT900-A User Manual

File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
GPS Vehicle Tracker
User Guide V1.2
VT900
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
Contents
1. Poduct Overview .......................................................................................................................... 3
2. For Your Safety ............................................................................................................................ 3
3. VT900 Characteristics ................................................................................................................... 4
4. Getting Started ............................................................................................................................ 4
4.1 Hardware and Accessories ..................................................................................................... 5
4.3 Functional Parts .................................................................................................................. 5
4.4 Connecting and Installation .................................................................................................... 6
5 Track by Phone .......................................................................................................................... 6
5.1 Track by Calling .................................................................................................................. 7
5.2 Track by Preset Interval ......................................................................................................... 7
5.3 Google Earth and Google Map ................................................................................................ 7
5.4 Track by GPRS/WCDMA between Server and Tracker .................................................................. 8
5.4.1 Set Tracker’s GPRS/WCDMA ID ...................................................................................... 8
5.4.2 Set APN .................................................................................................................... 8
5.4.3 Set IP and Port ........................................................................................................... 8
5.4.4 Set DNS Server IP (optional) ........................................................................................... 8
5.4.5 Enable GPRS/WCDMA Tracking ...................................................................................... 9
5.4.6 Set GPRS/WCDMA Interval ............................................................................................ 9
5.4.7 Set ACC Off Interval ..................................................................................................... 9
5.4.8 Set ACC Off Interval Function .......................................................................................... 9
6. Authorization .......................................................................................................................... 10
7. Application Examples for Inputs ...................................................................................................... 10
7.1 Detecting Lock Status of Car’s Door or Trunk (Car Boot). .............................................................. 10
7.2 Connecting with Switch Sensors ............................................................................................ 11
7.3 Ignition Detection .............................................................................................................. 11
7.4 Analog Input (AD1) ............................................................................................................ 11
8. Speeding Alarm ......................................................................................................................... 12
9. Movement/Geo-fence .................................................................................................................. 12
9.1 Movement Alarm ............................................................................................................... 12
9.2 Geo-fence Alarm ............................................................................................................... 13
10. Track by Distance ..................................................................................................................... 13
11. Set Sensitivity of Tremble Sensor .................................................................................................. 13
12. Output Control ......................................................................................................................... 13
12.1 Output Control (Immediate) ................................................................................................. 14
12.2 Output Control (Conditional) ................................................................................................ 14
12.3 Application Examples for Outputs ......................................................................................... 14
12.3.1 Engine Cut ............................................................................................................. 14
12.3.2 Connecting with Car Alarm .......................................................................................... 15
14. Heading Change Report ............................................................................................................. 15
15. Heartbeat ............................................................................................................................... 15
16. Track Log ............................................................................................................................... 15
16.1 Log by Interval ................................................................................................................ 16
16.2 Auto Log when no GPRS/WCDMA ........................................................................................ 16
16.3 Format Buffer ................................................................................................................. 16
17. Power Down ........................................................................................................................... 16
18. Get IMEI ................................................................................................................................ 17
19. Initialization ............................................................................................................................. 17
20. Password Initialization ................................................................................................................ 17
21. VT900 Work with RFID Reader ..................................................................................................... 17
21.1 Set authorized Card ID: ........................................................................................................... 18
21.2 Open/Close RFID Card Swiping to control Car Engine: ..................................................................... 18
Annex 1. SMS Command List ........................................................................................................... 18
Annex 2. Troubleshooting ................................................................................................................ 25
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
1. Poduct Overview
VT900 is a GPS/WCDMA based tracking device, specially developed and designed for vehicle real-time tracking and fleet
management.
VT900 has an inbuilt GPS module to obtain accurate position data. This device utilizes its GSM/W CDMA capability to send
position data to a specified mobile phone or server base for tracking and fleet management.
With internal memory, VT900 can store GPS coordinates when there is no GPRS/WCDMA connection, or at a specified
interval requested by the user.
One optional feature of VT900 is that a RS232 port Can connect RFID card reader, magnetic card reader and other
external equipment.
VT900 has the following functions and features:
SMS and GPRS/WCDMA TCP/UDP Communication
AGPS ( with GSM/WCDMA/WCDMA Base Station ID)
Track on Demand
Show Location Directly on Mobile Phone
Track by Time Interval
Track by Distance
Anti-Jammer (optional)
GSM/WCDMA Blind Area Memory
Internal Memory for Logging
Inbuilt Motion Sensor for Power Saving
Movement Alarm
Geo-fencing Control
Low Battery Alarm
Speeding Alarm
GPS Blind Area Alarm (in/out)
Power-cut Alarm
Engine Cut (Stop Engine)
I/O: 3 digital inputs , 2 outputs and 1 analog inputs, 1 RS232
RFID Reader Optional
Magnetic Card Reader Optional
2. For Your Safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Proper Connection
Do not connect any parts of this product to other incompatible devices. When
connecting with other devices, read instructions carefully to ensure proper
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
installation.
Qualified Accessories
Use original parts, qualified batteries and peripheral equipments to avoid
damage to VT900.
Safe Driving
Drivers should not operate this product while driving.
Qualified Service
Only qualified personnel can install or repair VT900.
Water Resistance
VT900 is not water resistant. Keep it dry. Install this device inside the vehicle or
use a waterproof bag for protection if necessary.
Confidential Phone Number
For safety reason, do not tell other people the mobile phone number of your
VT900 without taking precautions of security settings.
3. VT900 Characteristics
Items Specifications
Power Supply 9V - 36V / 1.5A
Backup Battery 500mAh
Normal power consumption 65mA/h
Dimension 65 x 61 x 26mm
Weight 90g
Work time 30 hours in power-saving mode and 7.5 hours in normal mode
Operating temperature -20° to 55° C
Humidity 5% to 95% Non-condensing
Frequency
VT900-T
UMTS/HSDPA: 850/2100MHz
GSM/WCDMA/GPRS/WCDMA: 850/900/1800/1900MHz
VT900-A
UMTS/HSDPA: 850/1900MHz
GSM/WCDMA/GPRS/WCDMA: 850/900/1800/1900MHz
VT900-E
UMTS/HSDPA: 900/2100MHz
GSM/WCDMA/GPRS/WCDMA: 900/1800MHz
GPS Sensitivity -165dB
Position Accuracy 2.5 meters
LED 2 LED lights to show GPS/GSM/WCDMA status
Flash Memory 8MB
Interface
3 digital inputs (2 negative and 1 positive triggering)
1 analog inputs(0~24V)
2 outputs 1 RS232
4. Getting Started
This section will describe how to set up your VT900.
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
4.1 Hardware and Accessories
VT900 is supplied in a box which includes:
VT900 with battery, GPS antenna, GSM/WCDMA/WCDMA antenna, Wires
4.2 View
4.3 Functional Parts
GPS LED (Blue)
On One button is pressed or input is active
Flashing ( every 0.1 second) The GPS module is being initialized
Flashing (0.1 second on and 2.9 seconds off) VT900 has a GPS fix
Flashing (1 second on and 2 seconds off) VT900 has no GPS fix
GSM/WCDMA LED (Green)
On A call is coming in / a call is being made
Flashing ( every 0.1 second) The GSM/WCDMA/WCDMA module is being initialized
Flashing (0.1 second on and 2.9 seconds off) VT900 is connected to the GSM/WCDMA/WCDMA network
Flashing (1 second on and 2 seconds off) VT900 is not connected to the GSM/WCDMA/WCDMA network
GSM/WCDMA
Connect to GSM/WCDMA/WCDMA antenna
GPS
Connect to GPS antenna
Power Key
Press and hold for 3~5 seconds to turn on/off VT900
USB
Used for firmware update, configuration on PC and Read COM log.
PINs Connector
PIN Color Function
DC Red DC In (power input). Input voltage: 9V~36V. 12V/24V suggested
GND Black Ground
IN1 White Digital Inputs. negative triggering
IN2 White Digital Inputs. negative triggering
IN3 White Digital Inputs. positive triggering
OUT1 Yellow
Low voltage (0V) when effective and open drain when ineffective
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max.
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
OUT2 Yellow
Low voltage (0V) when effective and open drain when ineffective
Output open drain sink voltage (ineffective): 45V max.
Output low voltage sink current (effective): 500mA max.
AD Blue 10 Bits Resolution Analog Inputs. Input voltage: 0~24V
RS232 Port
PIN1 DC 5V output
PIN2 Ground
PIN3 VT900 RX
PIN4 VT900 TX
4.4 Connecting and Installation
Read this manual before using your VT900. Check to make sure all parts are included in the packaging box.
4.4.1 Ensure that your VT900 has a working SIM card installed.
- Check that the SIM card has not run out of credit
- Check that the SIM card lock code is turned off
- If you require the function of sending an SMS location report to the authorized phone number when it makes a call to
the VT900, please make sure the SIM installed supports displaying caller ID.
- Before inserting SIM card, power down VT900
4.4.2 Antenna Connection
- Connect the GSM/WCDMA/WCDMA Antenna to VT900.
- Connect the GPS Antenna to VT900.
- GPS antenna should be fixed to face the sky, (It is recommended to place this device under the windshield) and
should not be covered or shielded by any objects containing metal.
4.4.3 Instal VT900
- Find a suitable place inside the car for installing VT900. Wiring connections must be firm and reliable. The joints
should be wrapped tightly with insulating tape. The unused electrical wire should be properly insulated.
- Check to make sure all wirings have been connected correctly. Then connect the AVL unit to the motor power.
- Make a missed phone call the VT900 using a mobile phone to check if the call can go through. The VT900 should
reply with an SMS indicating longitude, latitude, speed and google link.
5 Track by Phone
Command: W******,000
Description: Send this command or make a phone call to the tracker and you will receive an SMS with an http link. Click on
the link and the location will be shown directly on your mobile phone using Google maps. For example:
142161102222,Current! 20161123 15:53,V,0Km/h,http://maps.google.com/?q=22.540103,114.082329
content explanation remark
142161102222 Device ID
Current Current location
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
20161123 15:53 Date and Time，YYYYMMDD
hh:mm
The Event Time
V GPS invalid GPS status, A is valid, V is invalid
0Km/h Speed is 0Km/h GPS speed
http://maps.google.co
m/?q=22.540103,114
.082329
The google link
22.540103 is latitude
114.082329 is longitude
Google link
5.1 Track by Calling
Make a missed call to the tracker and it will report its longitude and latitude by SMS with the following format:
Latitude = 22 32 36.63N Longitude = 114 04 57.37E, Speed = 40.5Km/h, 2011-12-24, 01:50
5.2 Track by Preset Interval
Command: W******,002,XXX
Description: Set an interval for the tracker to continuously report its location by SMS
Note:
1. XXX is the interval in minutes;
2. XXX=000 to turn off tracking by time.
Example:
W000000,002,030
The tracker will send location data back to your mobile phone every 30 minutes.
5.3 Google Earth and Google Map
Download Google Earth from http://earth.google.com/.
Start Google Earth (For more information about Google Earth please refer to http://earth.google.com/ or go to
http://maps.google.com)
Input the latitude and longitude that you received from the tracker by SMS and click the search button. Google Earth or
Google Maps will display the location for you.
Example:
When you receive: Latitude = 22 32 40.05N Longitude = 114 04 57.74E
Type as the following picture shows:
(Note: you should input the latitude and longitude as: 22 32 40.05N 114 04 57.74E)
And then you can find the location of your tracker:
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
You can also use local map software on PDA or car navigation device to input the coordinates.
5.4 Track by GPRS/WCDMA between Server and Tracker
5.4.1 Set Tracker’s GPRS/WCDMA ID
Command: W******,010,ID
Description: Set a digital GPRS/WCDMA ID for the tracker.
Note: GPRS/WCDMA ID must not be over 14 digits.
Example:
W000000,010,100112112222
5.4.2 Set APN
Command: W******,011,APN,Username,Password
Description: Set APN details for the tracker
Note:
1. APN username and password are optional. If no APN username and password are required, just input APN only;
2. APN defaulted as ‘CMNET’;
Example:
W000000,011,CMNET,internet,internet
W000000,011,CMNET
5.4.3 Set IP and Port
Command: W******,012,IP,Port
Description: Set the IP and Port of tracker for GPRS/WCDMA communication.
Note:
1. IP is your server’s IP or the domain name.
2. Port: [1,65534]
Example:
W000000,012, 195.87.7.121,8500
W000000,012,www.domain.com,8500
5.4.4 Set DNS Server IP (optional)
Command: W******,009,DNS Server IP
File Name: VT900 User Manual Version 1.2
Project: VT900 Update Date: 2016-12-15
Sub Project: User Manual Page:
Description: If the domain name you set by the last command (W******,012,IP, Port) doesn’t work, your server IP is not
properly set. You can first use this command to set DNS Server IP (please check with your DNS server provider for the
DNS Server IP) and then redo the command W******,012,IP, Port.
Example: W000000,009,202.105.21.232
5.4.5 Enable GPRS/WCDMA Tracking
Command: W******, 013, X
Description: Enable GPRS/WCDMA tracking function.
Note:
X=0, to turn off GPRS/WCDMA tracking (default);
X=1, to enable GPRS/WCDMA tracking via TCP;
X=2, to enable GPRS/WCDMA tracking via UDP.
Example: W000000,013,1
5.4.6 Set GPRS/WCDMA Interval
Command: W******,014,XXXXX
Description: Set time interval for sending GPRS/WCDMA packets.
Note:
XXXXX should be in five digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS/WCDMA packet and in unit of 10 seconds.
Example: W000000,014,00060
In this example, the tracker will send every 600 seconds (10 minutes).
5.4.7 Set ACC Off Interval
Command: W******,304,XXXXX
Description: Set ACC off interval for sending GPRS/WCDMA packets when ACC off. Input3 is used as the ACC detect
input.
Note:
XXXXX should be in five digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS/WCDMA packet and in unit of 10 seconds.
Example: W000000,304,00060
In this example, the tracker will send every 600 seconds (10 minutes) when ACC off.
5.4.8 Set ACC Off Interval Function
Command: W******,305,X
Description: Set ACC off tracking function, Input3 is used as the ACC detect input.
Note:
X=0, to turn off this function;
Loading...
+ 18 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use