How it Works
Issyzone POS
Loading...
I
M
Loading...
Loading...
IMP015
User Manual
21 pgs573.5 Kb0

Issyzone POS IMP015 User Manual

Download
Page 1
Mobile Printer Rev 2.1
1
Mobile Printer
Page 2
Mobile Printer Rev 2.1
2
Introduction
The mobile printer is the ideal solution for Mobile banking system ,
Retail, point of sales, Credit card Transaction, other traveling and mobile computing etc.
The general features of mobile printer are as follows:
Compact size (113 82 48mm)
Light (246g) for true mobility [standard] Very silent printing thru direct thermal printing method High speed ( [40 - 60]mm/sec ) High resolution (203dpi : 8dots/mm). Bluetooth Ver2.0 + EDR, Mini USB Support Graphic OLED display(128 32dots) Support text and graphic printing Indicate Power(on/off), Error Easier paper roll loading One touch paper cover Printer door open & Paper-out sensor Self-diagnostic, High maintainability. In field programming ! Update Firmware, Download Fonts and Logos Microsoft Windows XP/VISTA/7/CE/Linux/Android/IOS compatible. Flow control : Software (XON/XOFF)
※
Hardware "ow control not supported in printer. Free fall: 1 meter onto concrete Agency Approvals
Page 3
Mobile Printer Rev 2.1
3
Operating Precautions
Please follow the precautions below to enjoy and maintain the full
performance of the printer.
Using the Printer
# Be careful not to drop or bump the printer on a hard surface. # Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆
Opera$ng temperature :-20%C to 50%C
◆
Rela&ve humidity : 30% to 80%
# Don't install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
# Don't open the platen cover during printing . # Don't remove or reinstall the communication cable during printing
or transmission.
# Don't touch the connectors of the communication during printing. # Switch the POWER OFF when not in use. # Don't use other solvent. # The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
# When the battery pack is used at low temperature, the length of
time the printer can be used may be shortened.
Thermal Paper Handling
# Store the thermal paper in a cool, dry and dark place. # Don't rub the paper with hard object. # Don't leave the paper with hard object. # Don't allow plastic film, erasers, or adhesive tape to touch the
Page 4
Mobile Printer Rev 2.1
4
paper for long periods.
# Don't stack the thermal paper with diazo copies immediately after
copying or wet-type copies.
# Don't use chemical glue. # Always to use the clean thermal paper.
Page 5
Mobile Printer Rev 2.1
5
Notes
This equipment communication part has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
The equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Safely operation under altitude of 2000 meters.
Safely operation in non-tropical climate conditions.
Page 6
Mobile Printer Rev 2.1
6
CONTENTS
1. Specifications ------------------------------------------- 7
1.1. Specifications ---------------------------------- 7
2. Setting up the printer ------------------------------- 9
2.1. Printer & Accessories ------------------------ 9
2.2. Printer Feature -------------------------------- 10
2.3. Dimensions ------------------------------------ 11
2.4. Replacing paper rool ------------------------ 12
2.5. Power supply --------------------------------- 13
2.5.1. Specified power supply -------------- 13
2.5.2. Installing the battery ----------------- 13
2.5.3. Recharging the battery pack ------- 14
2.6. Set operation mode ------------------------- 15
2.6.1. Turn on ----------------------------------- 15
2.6.2. Turn off ----------------------------------- 15
2.6.3. Sleep/Wakeup -------------------------- 15
2.6.4. Configuration --------------------------- 15
3. Interface ----------------------------------------------- 17
3.1. Mini USB -------------------------------------- 17
3.2. Bluetooth -------------------------------------- 17
4. Using the printer ------------------------------------- 18
4.1. Control panel ---------------------------------- 18
4.2. Self-test ----------------------------------------- 18
5. Consumable Parts ------------------------------------ 20
6. Revision History --------------------------------------- 21
Page 7
Mobile Printer Rev 2.1
7
1. Specifications
1.1. Specifications.
Item
Specifications
Print method
Direct thermal line printing
Characters
32cpl
Character size
ASCII(8x16,12x24); GBK & Big5(16x16,24x24)
Optional Characters
Simplified/Traditional Chinese, Arabic, Cyrillic,Russian, Tukish, Greek, Latin9 and Others upon request
Resolution
203dpi, 8dots/mm
Print width
2 inches (48mm, 384dots)
Paper width
58mm (max)
Paper thick
50um to 150um
Print speed
40mm/s to 60mm/s
Dimension
113 x 82 x 48mm
Weight
191g(not battery & roll paper) 249g(with battery but no roll paper) 305g(with battery & roll paper) [Standard paper: W 58mm; D 40mm]
Interface
Mini USB(RS232), Bluetooth Ver2.0
Paper roll
Width:58mm; Diameter: 40mm;
Paper loading Clamshell loading
Barcodes
1- dimension: EAN, UPC, Code39, Code93,
Code128 etc.
2- dimension: QRCode, PDF417, DataMatrix
Driver
Windows XP/Vista/7 Windows CE, Linux, Android, IOS
Black Mark detection
Support left mark & right mark detection
Label detection
Support Label detection
Support instruction
ESC/Pos CPCL Label
(Continue …)
Page 8
Mobile Printer Rev 2.1
8
Item Specifications LCD 128 x 32 OLED Battery Rechargeable 7.4V DC, 1300mAh(Li-ion) Battery duration 1 hour continuous printing
Battery changer
Input (100 ～ 240V AC, 50 ～60Hz, 0.3A) Output(12V DC/1A) max
Environment Conditions
Temperature -20℃ - 50℃(operating)
-5℃ - 35℃(storage)
Humidity 30% - 80%(operating)
10% - 90%(storage)
<Table 1>
Page 9
Mobile Printer Rev 2.1
9
2. Setting up the printer.
2.1. Printer & Accessories
Your printer box should include these items. If any items are damaged or missing,
please contact your dealer for assistance.
Printer (1) Charger adaptor(1)
Thermal Paper roll (1) Battery Pack(1)
↓OPTIONAL
UART/USB cable (1) Car Charger (1)
Page 10
Mobile Printer Rev 2.1
10
2.2. Printer Features
Part Name
Page 11
Mobile Printer Rev 2.1
11
2.3. Dimensions
Page 12
Mobile Printer Rev 2.1
12
2.4. Replacing paper roll
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover as the (One-Touch) way by sliding the latch in the arrow direction like the picture.
3. Insert a new paper roll as shown
4. Tear the excess paper off using the edge of paper door as a tear bar
Note: Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because the printer can't detect the paper end correctly.
Page 13
Mobile Printer Rev 2.1
13
2.5. Power supply
2.5.1. Specified power supply
The following specification is requested for Power supply Battery Charger: DC 12V/1A Avoid using power supply which its power capacity of power current is extremely high.
2.5.2. Installing the battery
To install Battery Pack, proceed as follows:
1. Slide the latch to right to open the battery cover
2. Install the battery
3. Install the battery cover
NOTE: Before installing or removing the battery pack, ensure the printer is OFF.
If the printer is not used for long period of time, remove the battery pack from the printer.
Page 14
Mobile Printer Rev 2.1
14
2.5.3. Recharging the battery pack
For recharging the battery pack, install the battery pack in the printer. Insert the Battery Charger to the charge connector of the printer.
NOTE: Do not remove the battery during charging.
The battery is consumable parts and when purchasing, compared to the use hour is decrease gradually. The recharging time depends on the voltage level and ambient temperature of the battery. Normally, it takes about 2 to 3 hours to recharge a battery pack. You must use the supplied adapter.
Page 15
Mobile Printer Rev 2.1
15
2.6. Set operation mode
2.6.1. Turn on
Keeping on press the power button 2s, turn on the printer.
2.6.2. Turn off
Keeping on press the power button 3s, turn off the printer while the printer is on.
2.6.3. Sleep/Wakeup
If no any operation and no data input, the printer will enter sleep mode. Pressing the power button or receiving the printing data, the printer wil be wakeup.
2.6.4. Configuration
Keeping on press set button 2s enter the config mode. In config mode, pressing set button will change config option; pressing the feed button will change config content.
Page 16
Mobile Printer Rev 2.1
16
Page 17
Mobile Printer Rev 2.1
17
3. Interface
The Mobile Printer has 2 printing interface: mini usb & bluetooth.
3.1. Mini USB
The Mobile Printer has a mini USB interface(It is a UART port also). If you want to print data through the PC standard USB port, you need install the usb device drive first.
USB Pin:
Pin No. Name Function
1 VCC +5V 2 DM DATA ­3 DP DATA + 4 NC. 5 GND Ground
3.2. Bluetooth
The Mobile Printer support Bluetooth2.0 / Class2(10m). You can print through the bluetooth port in the Notebook, mobile phone, PDA etc.
Page 18
Mobile Printer Rev 2.1
18
4. Using the printer
4.1Control panel
There are 3 buttons and 1 OLED screen on the control panel.
FEED Button:
Pressing the button, the printer will feed paper.
If the printer is in config mode, pressing the button will change the config option content.
Power Button:
Keeping on press the button, the power comes on or off. If the printer is in sleep mode, pressing the button will wake up the printer. If the printer is in config mode, pressing the button will exit config mode.
Set button:
Keeping on press the button, the printer will enter config mode. In config mode, pressing the button to change the config option.
OLED Screen:
OLED will display most of the printer status information. (i.e. current printer status, paper out, indication remaining battery,
Bluetooth status *)
4.2 Self-test
The self-test procedure will check most of the printer functions. Enter the config mode, pressing the set button to select the self-test option then press the feed button. The printer will print out the test result.
Page 19
Mobile Printer Rev 2.1
19
Part 1. Part 2.
Part 3.
Page 20
Mobile Printer Rev 2.1
20
5. Consumable Parts
Recommended paper
Type : Thermal paper, Thermal Label paper Paper width : 58mm Paper thickness : 50um ! 150um Paper diameter : 40mm
Cautions
1. Do not paste the paper to the core. And the roll paper which has near end mark printing on its near end is recommended.
2. Chemicals or oil may change the color of paper, or printed characters may fade.
3. Change of paper color starts from approx 70℃. Pay attention to heat,humidity and sun light.
4. Color of paper may be changed by being scratched by nail or hard metal, etc.
Page 21
Mobile Printer Rev 2.1
21
6. Revision History
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use