• Fully static operation: no clock or refresh
required
• Three state outputs
• Data control for upper and lower bytes
• Industrial temperature available
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION
The ISSI IS61LV25616 is a high-speed, 4,194,304-bit static
RAM organized as 262,144 words by 16 bits. It is fabricated
using ISSI's high-performance CMOS technology. This highly
reliable process coupled with innovative circuit design techniques, yields high-performance and low power consumption
devices.
When CE is HIGH (deselected), the device assumes a standby
mode at which the power dissipation can be reduced down
with CMOS input levels.
Easy memory expansion is provided by using Chip Enable
and Output Enable inputs, CE and OE. The active LOW Write
Enable (WE) controls both writing and reading of the memory.A
data byte allows Upper Byte (UB) and Lower Byte (LB) access.
The IS61LV25616 is packaged in the JEDEC standard
44-pin 400-mil SOJ, 44-pin TSOP Type II, 44-pin LQFP and
48-pin Mini BGA (8mm x 10mm).
LBLower-byte Control (I/O0-I/O7)
UBUpper-byte Control (I/O8-I/O15)
NCNo Connection
VccPower
GNDGround
2
Integrated Silicon Solution, Inc. — 1-800-379-4774
Rev. B
09/29/00
IS61LV25616ISSI
TRUTH TABLE
I/O PIN
ModeWECEOELBUBI/O0-I/O7I/O8-I/O15Vcc Current
Not SelectedXHXXXHigh-ZHigh-ZISB1, ISB2
Output DisabledHLHXXHigh-ZHigh-ZICC
XLXHHHigh-ZHigh-Z
ReadHLLLHD
HLLHLHigh-ZDOUT
HLLLLDOUTDOUT
WriteLLXLHDINHigh-ZICC
LLXHLHigh-ZDIN
LLXLLDINDIN
OUTHigh-ZICC
®
1
2
3
4
ABSOLUTE MAXIMUM RATINGS
Symbol ParameterValueUnit
VTERMTerminal Voltage with Respect to GND–0.5 to Vcc+0.5V
TBIASTemperature Under Bias–45 to +90°C
VCCVcc Related to GND–0.3 to +4.0V
TSTGStorage Temperature–65 to +150°C
PTPower Dissipation1.0W
Note:
1. Stress greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
OPERATING RANGE
RangeAmbient TemperatureVCCVCC
(1)
7, 8, 10 ns12 ns, 15 ns
5
6
7
8
9
10
11
Commercial0°C to +70°C3.3V +10%, -5%3.3V ± 10%
Industrial–40°C to +85°C3.3V +10%, -5%3.3V ± 10%
Integrated Silicon Solution, Inc. — 1-800-379-4774
Rev. B
09/29/00
12
3
®
IS61LV25616ISSI
DC ELECTRICAL CHARACTERISTICS (Over Operating Range)
SymbolParameterTest ConditionsMin.Max.Unit
VOHOutput HIGH VoltageVCC = Min., IOH = –4.0 mA2.4—V