ISOUND SOUNDBASE User Manual

Includes:

Aux use:

SoundBase

PORTABLE
SPEAKER SYSTEM

Compatible with

iPod shuffle (2nd generation), iPod nano,
Laptops, MP3, PSP

or any audio device with standard headphone output.

• SoundBase speaker system

• 4 “AA” batteries

• 3.5mm cable

Battery installation:

1. Open Battery door and install 4 “AA” batteries,

replace battery lid.

With iPod® Shuffle:

1. Slide selector lever to “Shuffle mini”.

2. Install Shuffle by lining up headphone slot with
headphone jack on unit.

3. Turn SoundBase on.

4. Operate iPod Shuffle as normal.

With iPod® Nano 1st/4th Generation:

1. Slide selector lever to “nano 1st/4th gen”

2. Install 1st or 4th Generation iPod nano by lining
up headphone slot with headphone jack on

unit.

3. Turn SoundBase on.

4. Operate iPod Nano as normal.

iPod® Nano 2nd Generation:

1. Slide selector lever to “nano 2nd gen”

2. Install 2nd Generation iPod Nano by lining up
headphone slot with headphone jack on unit

3. Turn SoundBase on.

4. Operate iPod Nano as normal.

1. With device powered OFF connect one end of

3.5mm cable to SoundBase, and other end to
device with standard 3.5mm headphone port.

2. Turn SoundBase ON

3. Operate device as normal.

Function Buttons:

(1) Selector Switch

(2) Headphone Jack
(3) Volume dial
(4) Aux input
(5) Power Switch
(6) DC power jack (AC adaptor not included)

FRONT

nano

shuffle

nano

1st/4th gen

mini

2nd gen

1 2 3 4 5 6

BACK

AUX OFF ON DC 5V

Incluye:

iPod® Nano 2ª generación:

SoundBase

PORTABLE
SPEAKER SYSTEM

Compatible with

iPod shuffle (2nd generation), iPod nano,
Laptops, MP3, PSP

or any audio device with standard headphone output.

• Sistema de altavoces SoundBase

• 4 baterías “AA”

• cable de 3.5 mm

Instalación de las baterías:

1. Abra la cubierta para baterías e instale las 4
baterías “AA”, reemplace la tapa de las
baterías.

Con iPod® Shuffle:

1. Deslice el selector a “Shuffle mini”.

2. Instale Shuffle alineando la ranura de los
audífonos con el conector para audífonos en la

unidad.

3. Encienda SoundBase.

4. Haga funcionar iPod® Shuffle de la forma

habitual.

Con iPod® Nano “1ª/4ª generación”

1. Deslice el selector a “nano 1st/4th gen”

2. Instale el iPod nano de 1ª o 4ª generación
alineando la ranura de los audífonos con el
conector para audífonos en la unidad.

3. Encienda SoundBase.

4. Haga funcionar iPod Nano de la forma habitual.

1. Deslice el selector a “nano 2st gen”

2. Instale el iPod Nano de 2ª generación
alineando la ranura de los audífonos con el
conector para audífonos en la unidad

3. Encienda SoundBase.

4. Haga funcionar iPod Nano de la forma habitual.

Uso auxiliar:

1. Con el dispositivo apagado, conecte un
extremo del cable de 3.5 mm a SoundBase, y el

otro extremo al dispositivo con puerto para

audífonos de 3.5 mm estándar.

2. Encienda SoundBase.

3. Haga funcionar el dispositivo de la forma

habitual.

Botones de función:

(1) Interruptor selector

(2) Conector para audífonos
(3) Selector de volumen
(4) Entrada auxiliar
(5) Interruptor de encendido
(6) Enchufe CC (no se incluye adaptador CA)