
TM
1
6
2
User’s Guide
3
®
4
Using the FM Transmitter:
1. Open the battery compartment and install 2 “AAA”
.
batteries. Close the battery lid.
a 5V DC adapter at many electronics stores, for optional power.
2. Connect one end of the included 3.5mm audio cable
to your audio device of choice, connect the other end
5
to the FM Transmitter.
with any audio device with a standard 3.5mm headphone jack.
3. Power “ON” the FM Transmitter by holding the
POWER button for 3-4 seconds. Follow the same
steps to POWER the unit “OFF”
Note: the FM transmitter works
Note: you can also purchase
www.isound.net
PRODUCT LAYOUT:
1. Power button
2. Optional power input 5V DC
3. 3.5mm jack
4. Preset buttons
5. Control stick
6. Channel display
®
(not included)
Set up an FM radio source:
1. You use the Full Function FM Transmitter to transmit
the audio from your audio device to ANY FM Radio
at home or in the Car.
2. On your FM radio, choose a FM radio station, now
set the FM Transmitter to the same station that you
chose on your FM radio. Press play on your audio
device and the audio will be wirelessly transmitted to
your FM radio. If you experience poor sound quality,
try a different FM radio station.
3. The FM Transmitter can store stations for later use,
to store a station press the 1, 2, 3 or 4 button for 3
seconds, the station will flash once to indicate the
station was stored. To return to the stored station,
press the number for which the station was stored.
FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or visit us on the web @ www.isound.net
™
P.O. BOX 478
Torrance, CA 90508
®
www.dreamgear.net
www.isound.net