Isound FULL FREQUENCY FM TRANSMITTER User Manual

1

2

6

PRODUCT LAYOUT:

1. Power button

2. Optional power input 5V DC
(not included)

3

3. 3.5mm jack

5

4. Preset buttons

5. Control stick

6. Channel display

4

USING THE FM TRANSMITTER:

1. Open the battery compartment and install 2 “AAA” batteries. Close the
battery lid.

NOTE: You can also purchase a 5V DC adapter at many electronics stores.

2. Connect one end of the included 3.5mm audio cable to your audio device
of choice and connect the other end to the FM Transmitter.

NOTE: The FM transmitter works with any audio device with a standard

3.5mm headphone jack.

3. Power “ON” the FM Transmitter by holding the POWER button for 3-4
seconds. Follow the same steps to POWER the unit “OFF.”

SET UP AN FM RADIO SOURCE:

1. Use the Full Function FM Transmitter to transmit audio from your audio
device to ANY FM Radio at home or in the Car.

2. Choose a station on your FM radio and set the FM Transmitter to the
same station. Press play on your audio device and the audio will be
wirelessly transmitted to your FM radio. If you experience poor sound
quality, try a different FM radio station.

3. The FM Transmitter can store stations for later use. To store a station,
press the 1, 2, 3 or 4 button for 3 seconds. The station will flash once to
indicate the station was stored. To return to the stored station, press the
number for which the station was stored.