TECHNICAL MANUAL
EN
PLEATED
BLINDS
Table of Contents – Pleated Blind
Types of pleated blinds 4
Color 5
Control of pleated blinds 5
Care instructions for pleated blinds 6
Child Safety 7
Photometric values 8
Types of Fixation 9
Pre-Tensioned pleated blinds VS 12
Freehanging pleated blinds F 30
Roof pleated blinds DFC 42
Pleated blinds for conservatories PL 46
Pleated blinds shapes SD and SR 60
A brand symbolizing years of tradition, innumerable investments into research and development, use of
high-quality materials, technological advancement, reliable work of hundreds of employees and many
more parameters, which together form one whole-the nal product of the company ISOTRA.
2
PLEATED BLINDS
Pleated blinds
Elegant element of modern interior
Many atypical shapes
Wide range of pleated materials, colors, patterns
and printing
Fabrics with various light permeability, black-out fabrics,
reflective fabrics and PEARL fabrics
Optional combination of two fabrics
Variable control system – cord, handle, profile
DF Comfort 10
Types of pleated blinds
SD 3 Dreieck feststehend
Types of pleated blinds Types of window opening
Pre-tensioned pleated blinds
VS 1
VS 2, VS 2 KL
VS 3, VS 3 SD
VS 4 Slope, VS 4 Slope S
VS 5, VS 5 SD
VS 6, VS 6 SD
VS 7, VS 8
VS 9, VS 9 D
VS 10, VS 10 D
Vertical Windows, Tilt and Turn Windows,
Balcony Doors
Freehanging pleated blinds F 1
F 2
F 3
F Slope 1
F Slope 2
FD Slope 3
F 7
F 8
Roof pleated blinds DFC 10
DF Comfort 10
DFC 20
DFC 30
Pleated blinds for conservatories PL 11
PL 30
PL 31
PL 32, PL 32 D
PL 33, PL 33D
PL 40
PL 41, PL 42
Vertical Windows, Tilt and Turn Windows,
Balcony Doors
Roof windows
Conservatories
Pleated blinds shapes SD and SR SD 2
Triangular and Circular Windows
SD 3
SR 1 S
4
Color
Head and bottom rail Plastic Components
white 01 white
PLEATED BLINDS
silver 02
black-brown 05
anthracite 12
Other RAL and DECORAL colors of prole are at extra charge.
Control
Control by cord lock with possibility of additional guidance
(for F pleated blinds)
grey
black
black
Control by plastic handle Control by operating rod Control by operating rod
(for types VS and PL pleated blinds) without joint with joint
(for PL pleated blinds) (for PL pleated blinds)
Control by prole Control by operating rod
(for types DFC pleated blinds) (for DFC pleated blinds)
12 Std.
Care Instructions for Pleated Blinds
1
3
5
2
max.
4
6
Pleated fabrics are easy to clean.
• Simply wash the blind in a solution of warm water
of max. 30°C and a mild detergent.
Rinse thoroughly, push the fabric into stack and
carefully squeeze the water out until the blind
does not drip any longer.
Hang the blind up in closed position. Open and
close the blind several times while allowing it to
dry to prevent the pleats sticking together. DO
NOT IRON!
• This excludes all metallised fabrics as well as coated black out fabrics and B1-qualities. These can
be carefully wiped clean with a cloth. Do not rub!
• We advise against chemical or ultrasonic cleaning
an do not accept warranty claims in such cases.
• We advise against chemical or ultrasonic cleaning
an do not accept warranty claims in such cases.
Product Information
Operation
For a long-lasting pleating it is necessary
to operate your pleated blind regularly
and also to fully raise the blind for longer
periods.
Especially when the pleated blind is
exposed to high temperatures (eg
southfacing windows, roof-lights,
conservatories etc.), above practise is
important to repeatedly support the pleats.
Cleaning Frames and Glass
• For cleaning window frames and
glasspanes do not use any caustic or
alkaline detergents which may encounter
directly or indirectly (condensation
water) with the blind.
• Insucient air ventilation (please see
tting instructions for min. mounting
spaces) can cause condensation water.
• Warranty does not apply to damages to
the fabric caused by dripping water or
insect excrements.
Exterior Usage
Pleated blinds are designed for heated
interior locations only and not for exterior
usage or swimming baths.
Therefore no warranty is given for exterior
installations, on open or partly glazed
roofed areas or swimming baths.
6
Important notes on child safety
Guidelines for child-safe tting of cord and chain operated pleated blinds
• Young children and can be strangled by loops in cords that operate the blind. There is a
risk that cords may become wrapped around a child’s neck.
• To avoid strangulation and entanglement, keep cords out of the reach of young children.
• Move beds, cots and any furniture away from window covering cords.
!
• Do not tie cords together. Make sure cords or chains do not twist and create a loop.
• To reduce the risk of such accidents, please install and use supplied safety devices
according to the tting instructions. Complies with EN 13120
• Child safety is a top priority during the selection and installation of sun protection
products.
• When selling and installing, certain points must be considered to ensure a standardised
and therefore child-safe tting. For queries, please contact the respective specialist.
They will gladly explain about the possible risks and ensure professional measuring and
installation.
• For a child-safe installation the head rail (cord outlet) must be ttet at least 1500 mm from
the oor.
• The installation height of our products must be indicated on each order. If the installation
height is not specied, the child safety of our products cannot be guaranteed.
• Please keep the safety information and tting instructions that you received with the
delivery of pleated blind.
• This cord winder must be securely xed to an adjacent surface and the lowest point of the
cord tassel must be at least 1500 mm from the oor.
• All cord operated blinds are supplied with a safety cord tassel. This opens up as soon as the
cords are pulled apart 60 mm and at the same time pressure of 6 kg apply.
• Afterwards the assembly can be done by oneself according to the assembling instructions
provided with the product.
PLEATED BLINDS
Model types F1, F2, F3, F7, F8, F Slope 1, F Slope 2, FD Slope 3, FD Slope 4:
min. 1500 mm!
In case of cord operated blinds, cord
winders must always be tted and used.
This cord winder must be securely xed to
an adjacent surface and the lowest point
of the cord tassel must be at least 1500
mm from the oor.
All cord operated blinds are supplied with
a safety cord tassel. This opens up as soon
as the cords are pulled apart 60 mm and at
the same time pressure of 6 kg apply.
Afterwards the assembly can be done
by oneself according to the assembling
instructions provided with the product.
Photometric values of pleated blinds
The properties of pleated blinds in connection with light depend on many factors - for example, weave, coating, yarn selection, color, etc.
These factors inuence the optical and thermo-technical eects and ensure that each fabirc has dierent lighting values.
The photometric values are spread on reection, absorption and transmission. Together they add up to 100%. (Inuences by ventilation,
glass, assembly and assemble distance are not considered).
Explanation of Terms
Example: Fabric no 10114
ABSORPTION
25% of the light
is absorbed by the fabric
REFLECTION
35% of the light
is reected by the fabric
TRANSMISSION
40% of the light
is transmitted
through the fabric
Pleated blinds for Computer Workplaces
window glass
fabric
Reection: The value of reection indicates
the amount of light reected from the fabric.
The more sunlight is reected, the less it will remain
in the room and the room is not so heated.
Transmission - The value of transmission indicates
the amout of light passing through the fabric.
The higher the transmission value,the brighter the
room.
Absorption - The value of absorption indicates
the amount of light absorbed by the fabric. The
absorbed light energy is usually converted into
heat.
Transmission
6%
Transmission
20%
N
N
W E
W
S
S
Transmission
0
5%
The intensity of sunlight varies from each of the
four directions.
Interior sunshades are designed to reduce the
incoming sunlight.
The maximum permissible transmission level
according to EU guidelines is given as percentage
for all four directions.
Transmission
6%
8
Types of xation
CA - xation to the wing CB - xation on the wing
(assembly to Fit to Window Beading) (assembly to frame using wall bracket)
PLEATED BLINDS
BV - xation on the wing without drilling KL – xation on the wing with adhesive bar
(assembly to frame using clamp bracket 25 mm)
L – xation on window bar
Types of xation
CA - xation to the wing CB - xation on the wing
BV - xation on the wing without drilling KL – xation on the wing with adhesive bar
L – xation on window bar
10
PLEATED BLINDS
ca. 10 mm
Bracket for CB xationBracket for L xation
Important notes
2,5 mm
5 mm
5 mm
5 mm
Attention!
If Not Specied:
Fabric Width = Rail Width
End Caps Overlap!
Distance Between Blind
and Window Pane = 5 mm!
Several Blinds Side by Side:
Light slit (fabric gap) between the blinds approx. 10 mm.
Necessary rail distance is determined by the manufacturer.
ca. 10 mm
Pre-tensioned pleated blinds VS
12
Basic Product Specication
22 mm
22 mm
16,9 mm
16,9 mm
max. 150 cm
max. 150 cm
max. 150 cm
max. 150 cm
1
Verspannte Anlagen
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
VS 1
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 5 cm
100 cm ca. 6 cm
150 cm ca. 7 cm
200 cm ca. 8 cm
220 cm ca. 9 cm
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
max. 150 cm
max. 150 cm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
1
Verspannte Anlagen
22 mm
22 mm
22 mm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
H
A
VS 1
VS 2
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Größenbereich Plissee
Breite (B) min. 20 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 5 cm
100 cm ca. 6 cm
150 cm ca. 7 cm
200 cm ca. 8 cm
220 cm ca. 9 cm
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 5 cm
100 cm ca. 6 cm
150 cm ca. 7 cm
200 cm ca. 8 cm
220 cm ca. 9 cm
Profilfarben
weiß schwarzbraun
silber anthrazit
messing alu gebürstet
(Mehrpreis)
Profilfarben
weiß schwarzbraun
silber anthrazit
messing alu gebürstet
(Mehrpreis)
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Größenbereich Wabenplissee
Breite (B) min. 20 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
max. 150 cm
max. 150 cm
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
max. 150 cm
max. 150 cm
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pleated blind “Type VS 1”
PLEATED BLINDS
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
120 mm 1500 mm 200 mm 1500 mm
to width 1200 mm max. 2200 mm
Fitting Situation:
Vertical
Pleated blind “Type VS 2”
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
min max min max
H
120 mm 1500 mm 200 mm 1500 mm
Package Height
Blind Height Package Height
to width 1200 mm max. 2200 mm
22 mm
16,9 mm
A
500 mm ca. 50 mm
1000 mm ca. 60 mm
1500 mm ca. 70 mm
2000 mm ca. 80 mm
2200 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
Limit dimensions of pleated blinds
min max min max
200 mm 1500 mm 200 mm 1500 mm
Width (A) Height (H)
to width 1200 mm max. 2200 mm
22 mm
16,9 mm
Fitting Situation:
Vertical
Note:
• In 1.3 m width magnet holders in RAL are
supplied.
• From 1.3 m width magnetic holders made with
a galvanized surface are supplied.
A
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
min max min max
200 mm 1500 mm 200 mm 1500 mm
500 mm ca. 50 mm
1000 mm ca. 60 mm
1500 mm ca. 70 mm
2000 mm ca. 80 mm
2200 mm ca. 90 mm
white black-brown
silver anthracite
H
Package Height
Blind Height Package Height
Proles Color
22 mm
22 mm
to width 1200 mm max. 2200 mm
16,9 mm
16,9 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Pleated blind “Type VS 3”
1
senkrechte Anlagen
rechteckig
2
senkrechte Anlagen
Sonderformen
3
Dachfenster-
anlagen
22 mm
max. 150 cm
max. 150 cm
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
max. 150 cm
max. 150 cm
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
1
Verspannte Anlagen
1
senkrechte Anlagen
rechteckig2
senkrechte Anlagen
Sonderformen3
Dachfenster-
anlagen4
Plafondanlagen
rechteckig5
Plafondanlagen
Sonderformen6
Rundbogen- und
Dreieckanlagen7
Zubehör Elektro
8
Einzelteile
H
A
22 mm
22 mm
16,9 mm16,9 mm16,9 mm16,9 mm
22 mm
22,5 mm
22 mm
18,5 mm16,9 mm 16,9 mm
VS 3
VS 3 SD
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Größenbereich Plissee
Breite (B) min. 12 cm
max. 100 cm
Höhe (H) min. 20 cm
max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 9 cm
100 cm ca. 10 cm
150 cm ca. 11 cm
200 cm ca. 12 cm
220 cm ca. 13 cm
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 9 cm
100 cm ca. 10 cm
150 cm ca. 11 cm
200 cm ca. 12 cm
220 cm ca. 13 cm
Profilfarben
weiß schwarzbraun
silber anthrazit
messing alu gebürstet
(Mehrpreis)
Profilfarben
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 100 cm
Höhe (H) min. 20 cm
max. 220 cm
1
Verspannte Anlagen
1
senkrechte Anlagen
rechteckig2
senkrechte Anlagen
Sonderformen3
Dachfenster-
anlagen4
Plafondanlagen
rechteckig5
22 mm
22,5 mm
22 mm
18,5 mm16,9 mm 16,9 mm
VS 3
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 9 cm
100 cm ca. 10 cm
150 cm ca. 11 cm
200 cm ca. 12 cm
220 cm ca. 13 cm
Profilfarben
weiß schwarzbraun
silber anthrazit
messing alu gebürstet
(Mehrpreis)
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
1
senkrechte Anlagen
rechteckig2
senkrechte Anlagen
Sonderformen3
Dachfenster-
anlagen4
Plafondanlagen
rechteckig5
Plafondanlagen
Sonderformen6
Rundbogen- und
Dreieckanlagen7
Zubehör Elektro
8
Einzelteile
22 mm
22,5 mm
22 mm
18,5 mm16,9 mm 16,9 mm
max. 150 cm
max. 150 cm
max. 100 cm
max. 220 cm
1
senkrechte Anlagen
rechteckig2
senkrechte Anlagen
Sonderformen3
Dachfenster-
anlagen4
Plafondanlagen
rechteckig5
max. 150 cm
max. 150 cm
1
senkrechte Anlagen
rechteckig
2
senkrechte Anlagen
Sonderformen
3
Dachfenster-
anlagen
22 mm
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Fitting Situation:
Vertical
Note:
• In case of using two fabrics the order of
substances is always set such that the fabric with
heavier weight is always basic fabric placed in
upper part of the blind, and the fabric with lower
weight is always additional fabric places in lower
part of the blind.
Pleated blind “Type VS 3 SD”
Fitting Situation:
Vertical
Note:
• IIn case of using two fabrics the order of
substances is always set such that the fabric with
heavier weight is always basic fabric placed in
upper part of the blind, and the fabric with lower
weight is always additional fabric places in lower
part of the blind.
A
A
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
120 mm 1500 mm 200 mm 1500 mm
to width 1200 mm max. 2200 mm
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
H
min max min max
120 mm 1500 mm 200 mm 1500 mm
to width 1200 mm max. 2200 mm
22 mm
Package Height
Blind Height Package Height
500 mm ca. 90 mm
1000 mm ca. 100 mm
1500 mm ca. 110 mm
2000 mm ca. 120 mm
2200 mm ca. 130 mm
Proles Color
white black-brown
silver anthracite
Limit dimensions of pleated blinds
min max min max
120 mm 1000 mm 200 mm 2200 mm
Width (A) Height (H)
Limit dimensions of honeycomb pleated blinds
H
Package Height
Blind Height Package Height
Proles Color
Width (A) Height (H)
min max min max
120 mm 1000 mm 200 mm 2200 mm
500 mm ca. 90 mm
1000 mm ca. 100 mm
1500 mm ca. 110 mm
2000 mm ca. 120 mm
2200 mm ca. 130 mm
white black-brown
silver anthracite
14
to width 1200 mm max. 2200 mm
22,5 mm
18,5 mm16,9 mm 16,9 mm
22 mm
22 mm
22 mm
22 mm
16,9 mm16,9 mm16,9 mm16,9 mm
Pleated blind “Type VS 2 KL”
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
Größenbereich Plissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Pakethöhen
Anlagenhöhe Pakethöhe
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
22 mm
16,9 mm16,9 mm 16,9 mm16,9 mm
max. 150 cm
max. 150 cm
Größenbereich Wabenplissee
Breite (B) min. 12 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
1
Verspannte Anlagen
26,6 mm
26,6 mm
16,5 mm16,5 mm
H
B
22 mm
17 mm
21 mm
6 mm
6 mm
5 mm
5 mm
16,9 mm16,9 mm
VS 2 Slide (seitlich geführt mit Griffleiste) Montage ohne Bohren
VS 2 KL Montage ohne Bohren
Größenbereich Plissee
Breite (B) min. 20 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Größenbereich Plissee
Breite (B) min. 20 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Hinweise
• Die Montage erfolgt mittels Klebeprofilen direkt auf der Glasscheibe.
• Kein Bohren oder Verschrauben erforderlich.
• Bei rechtwinkeligem Fensterfalz: max. Falztiefe 30 mm!
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 5 cm
100 cm ca. 6 cm
150 cm c a. 7 cm
200 cm ca. 8 cm
220 cm ca. 9 cm
Pakethöhen
Anlagenhöhe Pakethöhe
50 cm ca. 5 cm
100 cm ca. 6 cm
150 cm c a. 7 cm
200 cm ca. 8 cm
220 cm ca. 9 cm
Profilfarben
weiß grau
Größenbereich Wabenplissee
Breite (B) min. 20 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
Größenbereich Wabenplissee
Breite (B) min. 20 cm
max. 150 cm
Höhe (H) min. 20 cm
max. 150 cm
bis 120 cm Breite max. 220 cm
26,6 mm
26,6 mm
16,5 mm16,5 mm
21 mm
6 mm
5 mm
max. 150 cm
max. 150 cm
max. 150 cm
max. 150 cm
Limit dimensions of pleated blinds
min max min max
200 mm 1500 mm 200 mm 1500 mm
Limit dimensions of honeycomb pleated blinds
min max min max
200 mm 1500 mm 200 mm 1500 mm
Package Height
Blind Height Package Height
H
Fitting Situation:
Vertical
Note:
• Assembly is made with clamping proles
directly on the glass.
• No drilling or screwing required.
A
500 mm ca. 50 mm
1000 mm ca. 60 mm
1500 mm ca. 70 mm
2000 mm ca. 80 mm
2200 mm ca. 90 mm
Proles Color
white
Width (A) Height (H)
to width 1200 mm max. 2200 mm
Width (A) Height (H)
to width 1200 mm max. 2200 mm
PLEATED BLINDS
22 mm
16,9 mm16,9 mm
6 mm
5 mm
17 mm
22 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Measuring and assembly of pleated blinds VS 1, VS 2, VS 3, VS 3 SD
Sklo
Sklo
Min. hloubka 21 mm
Min. hloubka 21 mm
Obj. šířka = A – 5 mm
H
A
16 mm
30 mm
20 mm
H
H
min.
11 mm
min.
10 mm
!
X
X
X
X
H
A
Measuring to Fit to Window Beading - CA xation
Angled frame
window pane
Minimum depth 21 mm
H
Order width
Measure the width A at several
points in case of possible frame
size tolerances.
Order width = A
Order height = H
Straight frame:
window pane
Minimum depth 21 mm
A
Order width = A – 5 mm
Assembly to window bar (beading bracket) - L xation
H
A
Assembly to frame (using wall bracket) - CB xation
A
X
H
X = Desired Overlap
X
X
Order width = A minus 5 mm
Order height = H
Measure the corners of the window bar.
Order width = A plus 5 mm
Order height = H minus 18 mm
Please pay attention to window furniture.
Order width = A including overlap X
Order height = H including overlap X
X
Note:
• Dimension H = head rail.
• If you use top x bracket and bracket you
need further 4,5 mm.
Assembly to frame (using clamp bracket 25 mm) - BV xation
X
H
A
X = Desired Overlap
X
16
Check if the clamp bracket can be used regard-
!
ing window mechanism and the distance to
the window sill (strength of window wing max.
25 mm).
Please pay attention to window furniture.
Order width = A including desired overlap
X
Order height = H minus 10 mm
General note
2,5 mm
PLEATED BLINDS
Attention:
If Not Specied:
Fabric Width = Rail Width
End Caps Overlap!
5 mm
Distance Between Blind
and Window Pane = 5 mm
5 mm
5 mm
Several Blinds Side by Side:
Light slit (fabric gap) between the blinds approx. 10 mm.
Necessary rail distance is determined by the manufacturer.
Measuring and assembly of pleated blinds VS 2 KL
Checking the width of seal “D”
!
Measure the width of the seal “D” on all four sides for possible tolerances.
D less than or equal 5 mm
Glass
≤ 5 mm
D D
≤ 5 mm
LA/LH
ca. 10 mm
Order width = light width “LA” minus
4 mm
Order height = light height “LH” minus
8 mm
D more than 5 mm
Glass
Order width = light width of glass “LGA”
Order height = light height of glass
> 5 mm
D D
> 5 mm
LGA/LGH
Note for assembly of pleated blinds VS 2 KL
• Glass panes must be dry and free of grease, silicone or other contaminants.
• The optimum temperature for work is between 15-35 ° C (adhesive surface and surroundings).
• Air pocket inside the adhesive area is not a reason for complaint, unless disturbed functionality of proles.
plus 7 mm
“LGH” plus 3 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Basic Product Specication
22,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
18,5 mm18,5 mm
Pleated blind “Type VS 4 Slope”
W
C
A
H
controlcontrol
ovládání
Limit dimensions of pleated blinds
Base width (A) Slope width Height 1 (D) Height 2 (C) Angle (W)
min max max* min max min min max
300 mm 1500 mm 2300 mm 300 mm 1500 mm 100 mm 5° 60°
*depending on fabric width
to width 1200 mm
max. 2200 mm
Limit dimensions of honeycomb pleated blinds
Base width (A)
min max max* min max min min max
300 mm 1500 mm 2300 mm 300 mm 1500 mm 100 mm 5° 40°
*depending on fabric width
Package Height
Blind Height Package Height
Slope
width
Height 1 (D) Height 2 (C) Angle (W)
to width 1200 mm
max. 2200 mm
22,5 mm
18,5 mm18,5 mm
Fitting Situation:
Vertical
Pleated blind “Type VS 4 Slope S”
W
C
H
ovladání
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
2200 mm ca. 100 mm
22,5 mm
Proles Color
white black-brown
silver anthracite
22 mm
16,9 mm
Limit dimensions of pleated blinds
Base width (A) Height 1 (H) Height 2 (C) Angle (W )
min max min max min min max
300 mm 1000 mm 300 mm 2200 mm 100 mm 15° 35°
Limit dimensions of honeycomb pleated blinds
Base width (A) Height 1 (H) Height 2 (C) Angle (W )
min max min max min min max
300 mm 1000 mm 300 mm 2200 mm 100 mm 15° 35°
Package Height
Blind Height Package Height
22,5 mm
A
Fitting Situation:
Vertical
Note:
• Breakage is pushed up to the sloping rail.
• Upper rail movement can not be operated by
handle!
• Consider levelling chocks for sloping window
frames!
500 mm ca. 70 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
2000 mm ca. 100 mm
2200 mm ca. 110 mm
Proles Color
white black-brown
silver anthracite
18
18,5 mm18,5 mm
22,5 mm
22 mm
16,9 mm
H
C
A
15°
45°
Measuring and assembly of pleated blinds VS 4 Slope, VS 4 Slope S
B
Measuring to Fit to Window Beading - CA xation
Measure the width A at several
Angled frame:
window pane
Minimum depth 21 mm
Order width
H
C
A
Straight frame:
window pane
Minimum depth 21 mm
Order width = A
Order width = A – 5 mm
Note
The slope can be left or right. It is measured in the horizontal plane. Orientation of the slope is determined
by the height H left or right in the order form.
points in case of possible frame
size tolerances.
Order dimensions* = A, H and
Controlling dimension = B
* The necessary reductions are
determined by the manufacturer.
Please specify if frames are angled.
or straight.
PLEATED BLINDS
C (light
dimensions)
Note assembly of pleated blinds VS 4 Slope S
• Pleated blinds VS 4 Slope S are equipped with a hinge located between the upper control rail and the slope rail.
• Assembly into the angled frame must be done by using a leveling wedge, because otherwise intermediate movable
rail will protrude into space!
44°
33°
22°
90°
11°
!
Balance wedge 11°
CA11 (to frame, 1pc leveling wedge 11°)
CA22 (to frame, 2pc leveling wedge 11° = 22°)
CA33 (to frame, 3pc leveling wedge 11° = 33°)
CA44 (to frame, 4pc leveling wedge 11° = 44°)
Selecting the above value you receive
a given number of leveling wedges under each clip.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
X
X
X
!
X
X
X
X
H
C
A
X
X
X
X
ca. 10 mm
H
C
C
A
X
X
H
A
!
Assembly to frame (using wall bracket) - CB xation
B
B
H
Please pay attention to window furniture.
Order dimensions = A, H and C including
desired overlaps X
X
X
Controlling dimensions = B including desired
overlaps X
C
A
X
X
X = Desired Overlap
Note:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly to frame (using clamp bracket 25 mm) - BV xation
Check if the clamping carrier can be used as
!
regards window mechanism and the distance
to the window sill (strength casement max.
25 mm).
Please pay attention to window furniture.
H
X
X
Order width = A including desired
overlaps X
Order height 1 = height of window
C
Order height 2 = height of window beading
beadings at the highest
point of order width H
minus 10 mm
at the lowest point of order
A
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
X = Desired Overlap
Controlling dimension = B
height C minus 10 mm
Note
5 mm
5 mm
Distance Between Blind
and Window Pane = 5 mm
5 mm
ca. 10 mm
Several Blinds Side by Side
Light slit (fabric gap) between the blinds approx. 10 mm.
Necessary rail distance is determined by the manufacturer.
20
Basic Product Specication
20 mm
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
22,5 mm
20 mm
22,5 mm
22 mm
18,5 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
mm
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
mm
22,5 mm
20 mm
20 mm
22,5 mm
22,5 mm
22 mm
22 mm
22 mm
18,5 mm
18,5 mm
18,5 mm
16,9 mm
11,6
mm
11,6
mm
H
C
ovládání
A
Bk
B1
W
20 mm
11,6
mm
20 mm
11,6
mm
Pleated blind “Type VS 5”
PLEATED BLINDS
C
Fitting Situation:
Vertical
Note:
• B1 + Bk always add width A!
• Clamping cors are xed!
Typ plisse “VS 5 SD”
Bk
B1
Limit dimensions of pleated blinds
Width
(A)
Small width
(B1)*
Overhang
(Bk)
Height 1
(H)
Height
2 (C)
Angle
(W)
min max min* max min max min max min min max
300 mm 1500 mm 70 mm 1450 mm 50 mm 1200 mm 300 mm 1500 mm 100 mm 15° 80°
to width 1200 mm
max. 2200 mm
*The minimum top width when using the loop cord is 80 mm.
W
control
Limit dimensions of honeycomb pleated blinds
H
ovládání
Width
(A)
min max min* max min max min max min min max
300 mm 1500 mm 120 mm 1450 mm 50 mm 1200 mm 300 mm 1500 mm 100 mm 25° 80°
Small width
(B1)
Overhang
(Bk)
Height 1
(H)
Height
2 (C)
Angle
(W)
to width 1200 mm
max. 2200 mm
Package Height
A
Bk
B1
Blind Height Package Height
22 mm
500 mm ca. 70 mm
22,5 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
2000 mm ca. 100 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
Limit dimensions of pleated blinds
Width
(A)
min max min* max min max min max min min max
Small width
(B1)*
Overhang
(Bk)
Height 1
(H)
mm
11,6
16,9 mm
18,5 mm
18,5 mm
Height
2 (C)
20 mm
11,6
Angle
(W)
300 mm 1000 mm 70 mm 950 mm 50 mm 930 mm 300 mm 2000 mm 100 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
mm
W
C
Fitting Situation:
Vertical
Note:
• B1 + Bk always add width A!
• Clamping cors are xed!
Limit dimensions of honeycomb pleated blinds
H
control
ovládání
Width
(A)
min max min* max min max min max min min max
300 mm 1000 mm 120 mm 950 mm 50 mm 880 mm 300 mm 2000 mm 100 mm 25° 80°
Small width
(B1)
Package Height
Overhang
(Bk)
Height 1
(H)
20 mm
Height
2 (C)
Angle
(W)
Blind Height Package Height
mm
11,6
22 mm
22,5 mm
22 mm
22,5 mm
20 mm
18,5 mm
16,9 mm 16,9 mm
18,5 mm
mm
11,6
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
A
500 mm ca. 90 mm
1000 mm ca. 100 mm
1500 mm ca. 110 mm
2000 mm ca. 120 mm
Proles Color
white black-brown
silver anthracite
Typ plisse “VS 6”
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
22,5 mm
20 mm
22,5 mm
22 mm
18,5 mm 18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22,5 mm
22 mm
11,6
mm
22,5 mm
20 mm
22,5 mm
22 mm
18,5 mm 18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
20 mm
22,5 mm
22 mm
22 mm
16,9 mm 16,9 mm
11,6
mm
22,5 mm
20 mm
22,5 mm
22 mm
18,5 mm 18,5 mm
16,9 mm
11,6
mm
H
C
ovládání
A
Bk B2k
B1
W W
20 mm
11,6
mm
20 mm
11,6
mm
VS 6 SD Sechseck
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22,5 mm
22 mm
11,6
mm
22,5 mm
20 mm
22,5 mm
22 mm
18,5 mm 18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
Bk B2k
W W
C
Fitting Situation:
Vertical
Note:
• B1 + Bk + B2k always add width A!
• Clamping cors are xed!
• Also asymmetrically possible.
Typ plisse “VS 6 SD”
Bk B2k
W
C
B1
Limit dimensions of pleated blinds
Width
(A)
Small width
(B1)
Overhang
(Bk/B2k)
Height 1
(H)
Height
2 (C)
Angle
(W)
min max min* max min max min max min min max
300 mm 1500 mm 70 mm 1400 mm 50 mm 1200 mm 300 mm 1500 mm 100 mm 15° 70°
to width 1200 mm
max. 2200 mm
*The minimum top width when using the loop cord is 80 mm.
Limit dimensions of honeycomb pleated blinds
Width
H
control
ovládání
(A)
min max min* max min max min max min min max
300 mm 1500 mm 120 mm 1400 mm 50 mm 1200 mm 300 mm 1500 mm 100 mm 25° 70°
Package Height
Blind Height Package Height
A
500 mm ca. 70 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
2000 mm ca. 100 mm
B1
W
Proles Color
white black-brown
silver anthracite
Limit dimensions of pleated blinds
Width
(A)
min max min* max min max min max min min max
300 mm 1000 mm 70 mm 900 mm 50 mm 880 mm 300 mm 2000 mm 100 mm 15° 70°
*The minimum top width when using the loop cord is 80 mm.
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min* max min max min max min min max
300 mm 1000 mm 120 mm 900 mm 50 mm 830 mm 300 mm 2000 mm 100 mm 25° 70°
H
control
ovládání
Small width
(B1)
Small width
(B1)
Small width
(B1)
Overhang
(Bk/B2k)
Overhang
(Bk/B2k)
Overhang
(Bk/B2k)
Height 1
(H)
to width 1200 mm
max. 2200 mm
Height 1
(H)
Height 1
(H)
20 mm
22 mm
22,5 mm
22,5 mm
20 mm
Height
2 (C)
Height
2 (C)
Height
2 (C)
Angle
(W)
mm
11,6
16,9 mm
20 mm
mm
11,6
18,5 mm 18,5 mm
Angle
(W)
Angle
(W)
Package Height
mm
Blind Height Package Height
22 mm
11,6
A
Fitting Situation:
Vertical
Note:
• B1 + Bk + B2k always add width A!
• Clamping cors are xed!
• Also asymmetrically possible.
22,5 mm
16,9 mm 16,9 mm
20 mm
mm
11,6
500 mm ca. 90 mm
1000 mm ca. 100 mm
1500 mm ca. 110 mm
2000 mm ca. 120 mm
Proles Color
22 mm
white black-brown
silver anthracite
22
22,5 mm
18,5 mm 18,5 mm
X
X
X
X
X
X
H
H
C
C
A
A
B1
B1
Bk
Bk
B2k
B2k
H
C
A
B1
Bk
B2k
Measuring and assembly of pleated blinds VS 5, VS 5 SD, VS 6, VS 6 SD
B
B2BB2
B
B2
Measuring to Fit to Window Beading - CA xation
PLEATED BLINDS
Bk
B1
B2k
Measure the width A at several
points in case of possible frame
Angled frame:
Window pane
Minim. depth 21 mm
H
C
Straight frame:
Order width
Window pane
size tolerances.
Use the smallest measured width.
Order dimension* = A, B1, Bk, B2k,
H, C (light
dimensions)
Controlling dimension = B and B2
* The necessary reductions are determined
by the manufacturer.
A
Minim. depth 21 mm
Order width
Please specify if frames are angled or
straight.
Note
The slope can be left or right. It is measured in the horizontal plane.
The area of overhang is determined as Bk = left or B2k = right from inside the room.
Assembly to frame (using wall bracket) - CB xation
Bk
B1
B2k
Please pay attention to window
furniture.
X
X
X
Order dimensions = A, B1, Bk, B2k,
H, C including
desired overlaps
H
C
X
X
X
Controlling dimensions = B and B2
Note
X
including
desired overlaps
X
• Dimension H = upper prole.
A
Note
The slope can be left or right. It is measured in the horizontal plane.
The area of overhang is determined as Bk = left or B2k = right from inside the room.
X = Desired Overlap
• Clip and bracket require another 4,5 mm
each.
Assembly to frame (using clamp bracket 25 mm) - BV xation
Bk
B1
B2k
Check if the clamping carrier can be used
!
as regards window mechanism and the distance to the window sill (strength casement
max. 25 mm).
H
C
X
X
Please pay attention to window
furniture.
Order width = A, B1, Bk, B2k
including desired
overlaps X
Order height = H minus 10 mm,
Note
A
X = Desired Overlap
Controlling dimension = B and B2
C minus 5 mm
The slope can be left or right. It is measured in the horizontal plane.
The area of overhang is determined as Bk = left or B2k = right from inside the room.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Note
5 mm
5 mm
5 mm
Distance Between Blind
and Window Pane = 5 mm
B1
B
H H
C
Bk B1
A
B2
B2k
The recess sizes are measured with a plumbline.
C
24
Basic Product Specication
20 mm
11,6
mm
22,5 mm
22,5 mm
H
ovládání
A
Bk*
B2k*
B1
W W
20 mm
11,6
mm
20 mm
11,6
mm
20 mm
20 mm
22,5 mm
20 mm
20 mm
11,6
mm
22,5 mm
20 mm
11,6
mm
22,5 mm
20 mm
20 mm
11,6
mm
Pleated blind “Type VS 7”
PLEATED BLINDS
B1
Bk
W W
A
Fitting Situation:
Vertical
Note:
• B1 + Bk + B2k always add width A!
• Clamping cors are xed!
• Also asymmetrically possible.
B2k
H
control
ovládání
Limit dimensions of pleated blinds
Width
(A)
min max min* max min max min max min max
300 mm 1500 mm 70 mm 1400 mm 50 mm 1200 mm 300 mm 1500 mm 15° 70°
*The minimum top width when using the loop cord is 80 mm.
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
to width 1200 mm
max. 2200 mm
Angle
(W)
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max min max min max
300 mm 1500 mm 120 mm 1400 mm 50 mm 1200 mm 300 mm 1500 mm 25° 70°
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
to width 1200 mm
max. 2200 mm
Angle
(W)
Package Height
Blind Height Package Height
20 mm
500 mm ca. 70 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
2000 mm ca. 100 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
11,6
mm
Pleated blind “Type VS 8”
Bk
W
A
Fitting Situation:
Vertical
Note:
• B1 + Bk + B2k always add width A!
• Clamping cors are xed!
B1
Limit dimensions of pleated blinds
Width
(A)
min max min* max min max min max min max
300 mm 1500 mm 70 mm 1450 mm 50 mm 1200 mm 300 mm 1500 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
to width 1200 mm
max. 2200 mm
Angle
(W)
Limit dimensions of honeycomb pleated blinds
H
control
ovládání
Width
(A)
min max min max min max min max min max
300 mm 1500 mm 120 mm 1450 mm 50 mm 1200 mm 300 mm 1500 mm 25° 80°
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
to width 1200 mm
max. 2200 mm
Angle
(W)
Package Height
Blind Height Package Height
20 mm
mm
11,6
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
500 mm ca. 70 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
2000 mm ca. 100 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
Pleated blind “Type VS 9”
20 mm
22 mm
16,9 mm16,9 mm
11,6
mm
20 mm
20 mm
22 mm
16,9 mm16,9 mm
11,6
mm
20 mm
11,6
mm
22,5 mm
20 mm
22 mm
22 mm
18,5 mm18,5 mm
16,9 mm16,9 mm
11,6
mm
H
ovládání
A
Bk
B1
B2k
W W
20 mm
11,6
mm
20 mm
11,6
mm
20 mm
22 mm
16,9 mm16,9 mm
11,6
mm
20 mm
22,5 mm
20 mm
22 mm
22 mm
18,5 mm18,5 mm
16,9 mm16,9 mm
11,6
mm
20 mm
20 mm
11,6
mm
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
22,5 mm
20 mm
22 mm
22 mm
18,5 mm18,5 mm
16,9 mm16,9 mm
11,6
mm
20 mm
20 mm
11,6
mm
Bk
B1
W W
Fitting Situation:
Vertical
Note:
• B1 + Bk + B2k always add width A!
A
• Clamping cors are xed!
• Also asymmetrically possible.
Pleated blind “Type VS 9 D”
Bk
W
B1
B2k
B2k
W
Limit dimensions of pleated blinds
Width
(A)
min max min* min max min max min max
300 mm 1500 mm 70 mm 100 mm 1200 mm 300 mm 1500 mm 15° 70°
*The minimum top width when using the loop cord is 80 mm.
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
to width 1200 mm
max. 2200 mm
Angle
(W)
Limit dimensions of honeycomb pleated blinds
H
control
ovládání
Width
(A)
min max min min max min max min max
300 mm 1500 mm 120 mm 100 mm 1200 mm 300 mm 1500 mm 25° 70°
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
Limit dimensions of pleated blinds
Width
(A)
min max min* min max min max min max
300 mm 1500 mm 70 mm 100 mm 1200 mm 300 mm 1500 mm 15° 70°
*The minimum top width when using the loop cord is 80 mm.
Small width
(B1)
Small width
(B1)
Overhang
Overhang
(Bk/B2k)
(Bk/B2k)
Height
(H)
to width 1200 mm
max. 2200 mm
20 mm
22 mm
22,5 mm
Height
(H)
to width 1200 mm
max. 2200 mm
Angle
(W)
mm
11,6
16,9 mm
20 mm
mm
11,6
18,5 mm
Angle
(W)
Limit dimensions of honeycomb pleated blinds
H
control
ovládání
Width
(A)
min max min min max min max min max
300 mm 1500 mm 100 mm 100 mm 1200 mm 300 mm 1500 mm 25° 70°
Package Height
Blind Height Package Height
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
to width 1200 mm
max. 2200 mm
22 mm
Angle
(W)
16,9 mm
A
Fitting Situation:
Vertical
Note:
• Bk + B2k always add width A!
• Clamping cors are xed!
• Also asymmetrically possible.
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
26
22,5 mm
18,5 mm
20 mm
mm
11,6
Pleated blind “Type VS 10”
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
22 mm
16,9 mm
20 mm
11,6
mm
22 mm
16,9 mm
20 mm
22 mm
16,9 mm
20 mm
B1
H
control
ovládání
Limit dimensions of pleated blinds
Width
(A)
min max min max min max
300 mm 1200 mm 70 mm 300 mm 2000 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Upper width
(B1)*
Height
(H)
Angle
(W)
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max
300 mm 1500 mm 120 mm 300 mm 1500 mm 25° 70°
Upper width
(B1)
Height
(H)
Angle
(W)
20 mm
PLEATED BLINDS
W
A
Fitting Situation:
Vertical
Note:
• The slope can be left or right.
• Clamping cors are xed!
Pleated blind “Type VS 10 D”
B1
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
22 mm
mm
11,6
16,9 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm
Limit dimensions of pleated blinds
Width
(A)
min max min max min max
300 mm 1200 mm 70 mm 300 mm 2000 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Upper width
(B1)*
Height
(H)
Angle
(W)
20 mm
mm
11,6
W
A
Fitting Situation:
Vertical
Note:
• The slope can be left or right.
• Clamping cors are xed!
H
control
ovládání
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min min max min max
300 mm 1500 mm 100 mm 300 mm 1500 mm 25° 70°
Upper width
(B1)
Height
(H)
Angle
(W)
22 mm
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
16,9 mm
18,5 mm
20 mm
mm
11,6
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
X
X
X
X
H
H
H
A
A
A
B1
B1
Bk
Bk
Bk
B2k
B2k
B2k
X
X
X
X
H
H
A
A
B1
B1
Bk
Bk
B2k
B2k
H
A
B1
Bk
B2k
Measuring and assembly of pleated blinds VS 7 aVS 8
B
B2
B2
B2
B
B
B
B2
Measuring to Fit to Window Beading - CA xation
Bk
B1
A
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly to frame (using wall bracket) - CB xation
Bk
B2k
B1
B2k
H
H
Angled frame
Window pane
Minim. depth 21 mm
Order width
Straight frame:
Window pane
Minim. depth 21 mm
Order width
X
X
X
X
Order dimension* = A, B1, Bk, B2k
and H (light
dimensions)
Controlling dimension = B and B2
* The necessary reductions are determined
by the manufacturer.
Please specify if frames are angled or
straight.
Please pay attention to window furniture.
Order dimensions = A, B1, Bk, B2k
and H including
desired overlaps
X
Controlling dimensions = B and B2
including desired
overlaps X
Note
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm
each.
Note
A
X = Desired Overlap
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Measuring and assembly of pleated blinds VS 9, VS 9 D, VS 10, VS 10 SD
Measuring to Fit to Window Beading - CA xation
Bk
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly to frame (using wall bracket) - CB xation
Bk
B2k
H
A
B2k
Angled frame
Window pane
Minim. depth 21 mm
Order width
Straight frame
Window pane
Minim. depth 21 mm
Order width
Order dimension* = A, Bk, B2k
Controlling dimension = B and B2
* The necessary reductions are determined
by the manufacturer.
Please specify if frames are angled or
straight.
Please pay attention to window furniture.
Order dimensions = A, Bk, B2k and H
Controlling dimensions = B and B2
H
X
X
X
Note
• Dimension H = upper prole.
A
X = Desired Overlap
• Clip and bracket require another 4,5 mm
each.
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
and H (light
dimensions)
including desired
overlaps X
including desired
overlaps X
28
Note
PLEATED BLINDS
5 mm
5 mm
5 mm
Distance Between Blind
and Window Pane = 5 mm
B1
H H
Bk B1
B
B2k.
The recess sizes are measured with a plumb-line.
B2 B
Example of pleated blind VS 9 Example of pleated blind VS 9 D
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Freehanging pleated blinds F
Verspannte und freihängende Anlagen
für Sonderformen-Fenster (Dreh- und Kippfenster )
30
Basic Product Specication
22,5 mm
18,5 mm18,5 mm
H
H
A
A
22,5 mm
22,5 mm
22,5 mm
18,5 mm 18,5 mm18,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm
22,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm
H
A
22,5 mm
22,5 mm
18,5 mm18,5 mm
H
A
22,5 mm
22,5 mm
18,5 mm 18,5 mm18,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm
Pleated blind “Type F 1”
A
Fitting Situation:
Vertical
Note
- Optional with guide wire
(extra charge).
- Control possible left or right.
PLEATED BLINDS
Limit dimensions of pleated blinds
Width (A) Height (H)
min max* min max
150 mm 2300 mm 300 mm 2600 mm
*depending on fabric width
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
H
min max* min max
150 mm 2300 mm 300 mm 2600 mm
*depending on fabric width
22,5 mm
Package Height
Blind Height Package Height
500 mm ca. 50 mm
1000 mm ca. 60 mm
1500 mm ca. 70 mm
2000 mm ca. 80 mm
2600 mm ca. 90 mm
18,5 mm18,5 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
Pleated blind “Type F 2”
Fitting Situation:
Vertical
Note
• Optional with guide wire
(extra charge).
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
150 mm 2000 mm 300 mm 2600 mm
*depending on fabric width plisse
Limit dimensions of honeycomb pleated blinds
H
H
*depending on fabric width
A
Package Height
Blind Height Package Height
Width (A) Height (H)
min max* min max
150 mm 2000 mm 300 mm 2600 mm
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
2600 mm ca. 100 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
22,5 mm
18,5 mm 18,5 mm18,5 mm
22,5 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Pleated blind “Type F 3”
22,5 mm
H
A
22,5 mm
22,5 mm
22,5 mm
18,5 mm 18,5 mm18,5 mm
22,5 mm
22,5 mm
22,5 mm
18,5 mm 18,5 mm18,5 mm
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
150 mm 1500 mm 300 mm 2600 mm
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
H
min max min max
150 mm 1500 mm 300 mm 2600 mm
Fitting Situation:
Vertical
Note
• Optional with guide wire
(extra charge).
• Pleated blinds F3 always with
2 cord lock.
• In case of using two fabrics the
order of substances is always set
such that the fabric with heavier
weight is always basic fabric placed
in upper part of the blind, and the
fabric with lower weight is always
additional fabric places in lower part
of the blind.
Package Height
22,5 mm
Blind Height Package Height
A
500 mm ca. 70 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
2000 mm ca. 100 mm
2600 mm ca. 110 mm
22,5 mm
18,5 mm 18,5 mm18,5 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
32
C=H
C=H
A
A
Measuring and assembly of pleated blinds F 1, F 2, F 3
2,5 mm
ca. 10 mm
H
A
H
A
2,5 mm
5 mm
5 mm
5 mm
ca. 10 mm
H
A
Assembly to frame (using wall bracket) - CB xation
X
X X
H
X
A
X = Desired Overlap
PLEATED BLINDS
Please pay attention to window furniture.
Order width = A including desired overlap X
Order height = H including desired overlap X
Note:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Assembly to frame (using clamp bracket 25 mm) - BV xation
X X
A
H
X = Desired Overlap
Measuring to Fit to Window Beading - CA xation
H
A
Angled frame:
Window pane
Minim. depth 21 mm
Order width
Straight frame:
Window pane
Minim. depth 21 mm
Order width = A minus 5 mm
Check if the clamping carrier can be used
!
as regards window mechanism and the
distance to the window sill (strength of
window frame max. 25 mm).
Please pay attention to window furniture.
Order width = A including desired overlaps X
Order height = H
With side guiding
Order height = H minus 10 mm
Freehanging
Order height = H minus 5 mm
Measure the width A at several points in case
of possible frame size tolerances.
Order width = A
Order height = H
Order width = A minus 5 mm
Order height = H
Note
2,5 mm
!
5 mm
5 mm
5 mm
Distance
Between
Blind
and Window
Pane = 5 mm
ca. 10 mm
Attention:
If Not Specied:
Fabric
Width = Rail Width
End Caps Overlap!”
Specify assembly height!
See notes about child safety o page 7.
Several Blinds Side by Side
Light slit (fabric gap) between the blinds approx. 10 mm.
Necessary rail distance is determined by the manufacturer.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Basic Product Specication
22,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm
22,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm
H
C
ovládání
A
W
22,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm
22,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm
Pleated blind “Type F Slope 1”
W
Limit dimensions of pleated blinds
Base width
(A)
min max max min max max min max
300 mm 800 mm 1000 mm 300 mm 2600 mm 100 mm 5° 35°
Slope
width
Height 1
(H)
Height 2
(C)
Angle
(W)
Limit dimensions of honeycomb pleated blinds
- this type of pleated blinds is not deliver with honeycomb fabric
C
Fitting Situation:
Vertical
H
ovládání
control
A
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
2600 mm ca. 100 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm18,5 mm18,5 mm
22,5 mm
22,5 mm
Note
• Pleated blind is operable to the slope.
• Control is possible at higher or lower side
(please specify if left or right).
Pleated blind “Type F Slope 2”
W
H
control
ovládání
C
Limit dimensions of pleated blinds
Base width (A)
min max max* min max max min max
to angle
to angle
to angle
15°
300 mm 2200 mm1900 mm 1600 mm 1100 mm2300 mm 300 mm 2600 mm 100 mm 5° 50°
* depending on fabric width
30°
to angle
45°
Slope
width
50°
Height 1
(H)
Height
2
(C)
Angle
(W)
Limit dimensions of honeycomb pleated blinds
Base width (A)
min max max* min max max min max
to angle
to angle
15°
300 mm 2200 mm 1900 mm 1700 mm 2200 mm 300 mm 2600 mm 100 mm 5° 40°
* depending on fabric width
to angle
30°
Slope
width
40°
Package Height
Blind Height Package Height
Height 1
(H)
Height 2
(C)
22,5 mm
Angle
(W)
18,5 mm18,5 mm18,5 mm
Fitting Situation:
Vertical
Note
A
• Pleated blind is operable to the slope.
• Control on lower side is for bottom pleated blind,
control on higher side is for upper pleated blind.
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
2600 mm ca. 100 mm
Proles Color
white black-brown
silver anthracite
34
22,5 mm
22,5 mm
H
C
A
A
Measuring and assembly of pleated blinds F Slope 1, F Slope 2
B
B
Measuring to Fit to Window Beading - CA xation
Angled frame
Window pane
PLEATED BLINDS
Measure the width A at several
points in case of possible frame
size tolerances.
H
Minim. depth 21 mm
Order width
Order dimension* = A, H and C (light
dimensions)
Controlling dimension = B
C
Straight frame
Window pane
* The necessary reductions are determined
by the manufacturer.
Please specify if frames are angled
Note
Minim. depth 21 mm
A
Order width
or straight.
Note
• No side guidance is possible.
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Note for assembly of pleated blinds F Slope 2
• Pleated blinds F Slope 2 are equipped with the hinge located between upper control and prole in the slope.
• The assembly to the angled frame must necessarily be done with leveling wedges, otherwise the moving of middle prole is not correct!
90°
Balance wedge 11°
CA11 (to frame, 1pc leveling wedge 11°)
CA22 (to frame, 2pc leveling wedge 11° = 22°)
CA33 (to frame, 3pc leveling wedge 11° = 33°)
CA44 (to frame, 4pc leveling wedge 11° = 44°)
Selecting the above value you receive a given number
of leveling wedge under each clip.
Assembly to frame (using wall bracket) - CB xation
X
X
H
C
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
X
X
X = Desired Overlap
Please pay attention to window furniture.
Order dimensions = A, H and C including
desired overlaps X
Checking dimension = B including desired
overlaps X
Note
• Dimension H = upper prole.
• Clip and bracket require another
4,5 mm each.
• No side guidance is possible.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
C
X
X
X
H
A
B
Assembly to frame (using clamp bracket 25 mm) - BV xation
X
H
X
Check if the clamping carrier can be used as
regards window mechanism and the distance to
the window sill (strength of window frame max.
25 mm).
Please pay attention to window furniture.
Order dimension = A, H and C including
desired overlaps X
Controlling dimension = B
C
X
Note
• No side guidance is possible.
A
X = Desired Overlap
Note for assembly of pleated blinds F Slope 2
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Note
5 mm
5 mm
5 mm
Distance Between Blind
and Window Pane = 5 mm
ca. 10 mm
Ratio width of the fabric
to pleated blind width
2300
2200
2100
2000
1900
1800
1700
1600
1500
1400
1300
1200
1100
1000
Drop of angled part (mm)
Fabric Width 150 0 mm
900
800
700
600
500
400
300
200
100
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
F Slope 1
Fabric Width 2300 mm
F Slope 2
Base width A (mm)
50°
45°
40°
35°
30°
25°
20°
15°
10°
5°
The steeper the angle, the less the width. The angle of the
Several Blinds Side by Side
Light slit (fabric gap) between the blinds approx. 10 mm.
Necessary rail distance is determined by the
manufacturer.
slope has a considerable inuence on the maximum width.
The diagram shows the possible width in relation to angle and
width of the fabric on. The height of the slope is calculated H
minus C.
!
Specify assembly height!
See notes about child safety
o page 7.
36
Basic Product Specication
22,5 mm
22,5 mm
18,5 mm18,5 mm18,5 mm 18,5 mm11 mm
22,5 mm
18,5 mm18,5 mm18,5 mm 18,5 mm11 mm
Pleated blind “Type FD Slope 3”
W
A
Fitting Situation:
Vertical
Note:
• Pleated blind is operable to the slope.
• Control is possible at higher or lower side
(please specify if left or right).
Limit dimensions of pleated blinds
Base width
(A)
min max* max min max min max
300 mm 2200 mm 2300 mm 300 mm 1600 mm 5° 50°
* depending on fabric width
H
ovládání
control
Limit dimensions of honeycomb pleated blinds
Base width
(A)
min max* max min max min max
300 mm 2200 mm 2300 mm 300 mm 1600 mm 5° 40°
* depending on fabric width
Slope
width
Slope
width
Package Height
Blind Height Package Height
500 mm ca. 70 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
Height
(H)
Height
(H)
PLEATED BLINDS
Angle
(W)
Angle
(W)
22,5 mm
18,5 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
H
A
X
X
X
H
H
Measuring and assembly of pleated blinds FD Slope 3
B
B2
B
5 mm
5 mm
5 mm
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
šířka látky 150 0 mm
výška šikmé části (mm)
šířka látky 2300 mm
50°
45°
40°
35°
30°
25°
20°
15°
10°
5°
FD Slope 3
5 mm
5 mm
5 mm
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
šířka látky 150 0 mm
šířka základny A (mm)
výška šikmé části (mm)
šířka látky 2300 mm
50°
45°
40°
35°
30°
25°
20°
15°
10°
5°
FD Slope 3
Aufgrund der Profillage ergeben sich in den Eckbereichen Flächen,
die nicht abgedeckt werden!
Je nach Winkel und Anlagentyp variieren diese Flächen und
sind kein Grund zur Beanstandung.
!
1800
1900
2000
2100
2200
2300
šířka látky 2300 mm
50°
45°
40°
35°
Measuring to Fit to Window Beading - CA xation
Angled frame
Window pane
Minim. depth 21 mm
H
Straight frame
A
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly to frame (using wall bracket) - CB xation
Order width
Window pane
Minim. depth 21 mm
Order width
Order dimension* = A and H
(light dimensions)
Controlling dimension = B
* Necessary reductions are determined by
the manufacturer.
Please specify if frames are angled
or straight.
Please pay attention to window furniture.
Order dimension* = A and H
(light dimensions)
Controlling dimension = B
H
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Note
5 mm
5 mm
5 mm
Distance Between
Blind
and Window Pane
= 5 mm
A
Ratio width of the fabric
to pleated blind width
2300
2200
2100
2000
1900
1800
1700
1600
1500
Fabric Width 150 0 mm
1400
1300
1200
1100
1000
900
800
700
Drop of angeled part (mm)
600
500
400
300
200
100
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200
The steeper the angle, the less the width. The angle
of the slope has a considerable inuence on the
maximum width. The diagram shows the possible
width in relation to angle and width of the fabric on.
The height of the slope is calculated H minus C.
X = Desired Overlap
Fabric Width 2300 mm
Base width A (mm)
FD Slope 3
X
X
X
50°
38
45°
40°
35°
30°
25°
20°
15°
10°
5°
Note
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm
each.
• No side guidance is possible.
Due to the prole location in the corner,
there are areas which are not shaded!
!
Example of pleated blind FD Slope 3
Specify assembly height!
See notes about child safety
o page 7.
Basic Product Specication
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
Pleated blind “Type F7”
PLEATED BLINDS
Bk
B1
B2k
H
control
ovládání
A
Fitting Situation:
Vertical
Note:
• B1 + Bk + B2k always add width A!
• Also asymmetrically possible.
• Control possible left or right (please specify).
• Control cord in the viewing area.
Limit dimensions of pleated blinds
Width
(A)
min max min max min max min max
600 mm 2000 mm 500 mm 1900 mm 50 mm 200 mm 300 mm 2400 mm
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max min max
600 mm 2000 mm 500 mm 1900 mm 50 mm 200 mm 300 mm 2400 mm
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
22,5 mm
Package Height
Blind Height Package Height
22,5 mm
500 mm ca. 50 mm
1000 mm ca. 60 mm
1500 mm ca. 70 mm
2000 mm ca. 80 mm
2400 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm 18,5 mm18,5 mm
Pleated blind “Type F 8”
A
B1
H
ovládání
control
Bk
Fitting Situation:
Vertical
Note:
• B1 + Bk always add width A!
• Control possible left or right (please specify).
• Control cord in the viewing area.
Limit dimensions of pleated blinds
Width
(A)
min max min max min max min max
550 mm 2000 mm 500 mm 1950 mm 50 mm 200 mm 300 mm 2400 mm
Small width
(B1)
Overhang
(Bk)
Height
(H)
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max min max
550 mm 2000 mm 500 mm 1900 mm 50 mm 200 mm 300 mm 2400 mm
Package Height
Blind Height Package Height
500 mm ca. 50 mm
1000 mm ca. 60 mm
1500 mm ca. 70 mm
2000 mm ca. 80 mm
2400 mm ca. 90 mm
Small width
(B1)
Overhang
(Bk)
Height
(H)
22,5 mm
22,5 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm 18,5 mm18,5 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
X
X
X
X
H
H
A
A
B1
B1
Bk
Bk
B2k
B2k
H
A
B1
Bk
B2k
Measuring and assembly of pleated blinds F 7 aF 8
B
B2
B
B
B2
Measuring to Fit to Window Beading - CA xation
Bk
B2k
B1
H
Angled frame
Window pane
Minim. depth 21 mm
Order width
Straight frame
Window pane
Order dimension* = A, B1, Bk, B2k
and H (light
dimension)
Controlling dimension = B and B2
* Necessary reductions are determined
by the manufacturer.
Minim. depth 21 mm
Order width
A
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly to frame (using wall bracket) - CB xation
Bk
A
B1
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
B2k
X
H
X
X
X
X = Desired Overlap
Please specify if frames are angled
or straight.
Please pay attention to window furniture.
Order dimension = A, B1, Bk, B2k and
H including desired
overlaps X
Controlling dimension = B and B2 including
desired overlaps X
Note
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm
each.
Assembly to frame (using clamp bracket 25 mm) - BV xation
Bk
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
B1
Check if the clamping carrier can be used as
!
regards window mechanism and the distance
to the window sill (strength of window frame
max. 25 mm).
Please pay attention to window furniture.
H
X
X
Order width = A, B1, Bk including
desired overlaps X
Order height = H minus 10 mm
Controlling dimension = B (B2)
A
X = Desired Overlap
40
Note
PLEATED BLINDS
5 mm
5 mm
5 mm
!
Distance Between Blind and
Window Pane = 5 mm
Specify assembly height!
H H
Bk B1
See notes about child safety
o page 7.
The recess sizes are measured with a plumb-line.
B1
B2 B
B2k
A
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Roof pleated blinds DFC
42
34,5 mm
27 mm
27 mm
27 mm
36,5 mm
23,5 mm23,5 mm
23,5 mm
H
H
A
A
ovládáníovládání
32,2 mm
31,2 mm
32,2 mm
31,2 mm
Basic Product Specication
34,5 mm
36,5 mm
34,5 mm
36,5 mm
34,5 mm
36,5 mm
34,5 mm
36,5 mm
34,5 mm
27 mm
36,5 mm
23,5 mm
32,2 mm
31,2 mm
34,5 mm
36,5 mm
32,2 mm
31,2 mm
34,5 mm
27 mm
27 mm
36,5 mm
23,5 mm23,5 mm
23,5 mm
H
A
ovládání
32,2 mm
31,2 mm
32,2 mm
31,2 mm
34,5 mm
27 mm
36,5 mm
23,5 mm23,5 mm
H
A
ovládáníovládání
32,2 mm
31,2 mm
PLEATED BLINDS
Pleated blind “Type DFC 10”
A
Fitting Situations:
Angled
Note
• Possible with operating rod.
• For windows with angled
or straight frames.
• DFC only available for assembly
in the beading.
Pleated blind “Type DFC 20”
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
250 mm 1500 mm 400 mm 1500 mm
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
min max min max
250 mm 1500 mm 400 mm 1500 mm
H
ovládání
control
Package Height
Blind Height Package Height
500 mm ca. 70 mm
1000 mm ca. 80 mm
1500 mm ca. 90 mm
Proles Color
white black-brown
silver
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
250 mm 1500 mm 400 mm 1500 mm
to width 1200 mm max. 1900 mm
to width 1200 mm max. 1900 mm
34,5 mm
36,5 mm
32,2 mm
27 mm
to width 1200 mm max. 1900 mm
23,5 mm
31,2 mm
Fitting Situations:
Angled
Note
• Possible with operating rod.
• For windows with angled
or straight frames.
• DFC only available for
assembly in the beading.
Limit dimensions of honeycomb pleated blinds
H
control
ovládání
Width (A) Height (H)
min max min max
250 mm 1500 mm 400 mm 1500 mm
Package Height
Blind Height Package Height
A
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
to width 1200 mm max. 1900 mm
27 mm
23,5 mm
32,2 mm
31,2 mm
Proles Color
white black-brown
silver
27 mm
23,5 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Pleated blind “Type DFC 30”
34,5 mm
27 mm
27,5 mm
36,5 mm
23,5 mm 29 mm
H
A
ovládání
32,2 mm
31,2 mm
34,5 mm
36,5 mm
34,5 mm
36,5 mm
34,5 mm
27,5 mm
36,5 mm
31,2 mm
H
control
ovládání
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
250 mm 1500 mm 400 mm 1500 mm
to width 1200 mm max. 1900 mm
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
min max min max
250 mm 1500 mm 400 mm 1500 mm
to width 1200 mm max. 1900 mm
34,5 mm
Package Height
Blind Height Package Height
36,5 mm
A
Fitting Situations:
Angled
Note
• Possible with operating rod.
• For windows with angled
or straight frames.
• DFC only available for
assembly in the beading.
• In case of using two fabrics the order
of substances is always set such that
the fabric with heavier weight is always basic fabric placed in upper part
of the blind, and the fabric with lower
weight is always additional fabric
places in lower part of the blind.
500 mm ca. 100 mm
1000 mm ca. 120 mm
1500 mm ca. 140 mm
Proles Color
white black-brown
silver
27,5 mm
27 mm
31,2 mm
32,2 mm
23,5 mm 29 mm
44
96°
100°
Measuring and assembly of pleated blinds DFC
96°
90°
W
Standardised roof windows
roof windows Velux
Type window A
Window pane
96°
light window size
Type window B
Window pane
100°
light window size
PLEATED BLINDS
Assembly of pleated blinds si always done to the
frame.
Over the years Velux changed several types of
windows, without issuing new label types.
Please specify:
- window brand
- type (e.g. GGL)
- dimensions (e.g. FK06)
In addition to this, please provide a light window
dimensions as the checking dimensions, measured
at the front edge (see drawing).
Attention: type DFC can not be assembled to
windows GGL produced in June 2000.
roof windows Roto
roof windows Braas/Blefa/Dörken
roof windows Fakro
Non-Standardised roof windows
Old design
Window pane
90°
light window size
New design
Window pane
100°
light window size
Straight frame
Window pane
90°
light window size
Angled frame
Window pane
102°
light window size
Assembly of pleated blinds si always done to the
frame.
Company Roto produces 2 types of window
frames.
Please specify:
- window brand
- type (e.g. R7)
- dimensions (e.g. 7/11)
In addition to this, please provide a light window
dimensions as the checking dimensions.
Please note that the light dimensions are
measured at the narrowest point for Roto
windows (see drawing).
Attention: Pleated blinds DFC with handle can
not be assembled to roof windows
produced by these companies.
Assembly of pleated blinds si always done to the
frame.
Please specify:
- window brand
- type (e.g. FTS)
- dimensions (e.g. 66/98)
In addition to this, please provide a light window
dimensions as the checking dimensions.
Straight frame
Window pane
90°
Min. depth 33 mm
light window size
Angled frame
Window pane
W
Min. depth 33 mm
light window size
Note
Assembly of pleated blinds si always done to the
frame. Please specify the light dimensions of
window measured at the front edge (see drawing).
In addition to this, please specify bevel frame, bevel
angle between window pane and window frame.
A
H H
A
A
Measure at several points in case of possible
frame size tolerances.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Pleated blinds for conservatories PL
1
senkrechte Anlagen
rechteckig
2
senkrechte Anlagen
Sonderformen
3
Dachfenster-
anlagen
4
Plafondanlagen
rechteckig
Plafond- und Deckenanlagen
für rechteckige Fenster (Plafond-Glasdächer und Wintergärten)
46
22,5 mm
22 mm
Basic Product Specication
22,5 mm
22 mm
22,5 mm
22 mm
PLEATED BLINDS
Pleated blind “Type PL 11”
A
Fitting Situations:
Angled / Horizontal
Limit dimensions of pleated blinds
Width (A) Height (H)
min max min max
200 mm 1500 mm 300 mm 4000 mm
Limit dimensions of honeycomb pleated blinds
Width (A) Height (H)
min max min max
H
200 mm 1500 mm 300 mm 4000 mm
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
2500 mm ca. 100 mm
3000 mm ca. 110 mm
3500 mm ca. 120 mm
4000 mm ca. 130 mm
22,5 mm
22 mm
Note
• Possible with operating rod (extra charge).
• Assembly angled or horizontal.
• Tension wires are UV-resistant and made of black
coated steel wire.
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm 18,5 mm16,9 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Measuring and assembly of pleated blinds PL 11
Assembly to rafters - CA xation (assembly to window beading)
Window pane
A
H H
A
A
Minimum depth
100 mm
Pleated blind
Order width=A-5mm
Assembly under rafters - CB xation (assembly to frame using wall bracket)
!
Please consider the air ventilation gaps at the top
and bottom as well as the thickness of mounting
prole for the lenght (H).
Order width = A minus 5 mm
Order height = H minus ventilation gaps and
For installation between the rafters, please
measure the width A in several places
and subtract 5mm from the narrowest
measure.
mounting prole if it should be
used.
A
H H
A
A
Note
100
50
25 25
Blind height
Anlagenhöhe
Window pane
Minimum depth
100 mm
Pleated blind
X
A
recess size
X
X = Desired Overlap
Note for assembly using bracket
• Dimension H = upper prole.
• Clip and bracket require another
4,5 mm each.
Air Circulation
Pleated blinds in conservatories are an ideal, functional sun
protection. This requires adequate ventilation and air circulation.
100
50
Insucient ventilation and air circulation can cause condensation.
No warranty for material damage caused by dripping
condensation water and sharp glass cleaner, which encounter
directly or indirectly with the fabric. Also no warranty for insect
excrements.
Assembly spaces
Please leave a minimum space of 100 mm between the Cosior
pleated blind and the window pane and at least 50 mm at the top
and bottom between the mounting prole and the wall to ensure
sucent circulation.
For installation between the rafters, please
!
measure their distance and add the
favoured Overlap.
Please consider the air ventilation gaps at the top
and bottom as well as the thickness of mounting
prole for the lenght (H).
Order width = recess size
= A plus desired overlaps X
Order height = r ecess size = H minus ventilation
gaps and mounting prole if it
should be used.
Please consider the air ventilation gaps at the top
and bottom.
Displayed mounting prole is not part of delivered pleated blinds.
48
Note
PLEATED BLINDS
Top
Left Right
Bottom
A
A
A
A
H
A
A
H
Always measure indoors.
The amount of tensioned wires (black)
Blind width Tensioned wired amount
200 mm 2
300 mm 3
400 mm 3
500 mm 3
600 mm 4
700 mm 4
800 mm 5
900 mm 5
1000 mm 5
1100 mm 6
1200 mm 6
1300 mm 7
1400 mm 7
1500 mm 7
Attention:
If Not Specied:
Fabric Width = Rail Width
End Caps Overlap!
2,5 mm
Please Note:
No warranty on glass damages that occur after
the installation of pleated blinds.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
H
ovládání
A
Bk
B2k
B1
W W
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
Basic Product Specication
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
Pleated blind “Type PL 30”
Bk
B1
W W
A
Note
Fitting Situations:
Angled / Horizontal
• B1 + Bk + B2k always add width A!
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
• Also asymmetrically possible.
Pleated blind “Type PL 31”
Bk
W
B1
B2k
Limit dimensions of pleated blinds
Width
(A)
min max min* max min max min max min max
300 mm 1500 mm 70 mm 1400 mm 50 mm 1200 mm 300 mm 2000 mm 15° 70°
*The minimum top width when using the loop cord is 80 mm.
Small width
(B1)
Overhang
(Bk/B2k)
Height
(H)
Angle
(W)
Limit dimensions of honeycomb pleated blinds
H
control
ovládání
Width
(A)
min max min max min max min max min max
300 mm 1500 mm 120 mm 1400 mm 50 mm 1000 mm 300 mm 2000 mm 25° 70°
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
Small width
(B1)
Overhang
(Bk/B2k)
Height
20 mm
22 mm
(H)
Angle
(W)
mm
11,6
16,9 mm
20 mm
mm
11,6
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm
Limit dimensions of pleated blinds
Height
Height
20 mm
22 mm
(H)
(H)
mm
11,6
Angle
(W)
Angle
(W)
H
control
ovládání
Width
(A)
min max min* max min max min max min max
300 mm 1500 mm 70 mm 1450 mm 50 mm 1200 mm 300 mm 2000 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max min max min max
300 mm 1500 mm 120 mm 1450 mm 50 mm 1000 mm 300 mm 2000 mm 25° 80°
Small width
(B1)
Small width
(B1)
Overhang
(Bk/B2k)
Overhang
(Bk/B2k)
Package Height
Blind Height Package Height
A
Fitting Situations:
Angled / Horizontal
Note
• B1 + Bk always add width A!
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
50
16,9 mm
20 mm
mm
11,6
18,5 mm
22,5 mm
Pleated blind “Type PL 32”
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
PL 32 Dreieck
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
22 mm
16,9 mm
20 mm
H
ovládání
A
Bk
B1
B2k
W W
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
22 mm
16,9 mm
20 mm
11,6
mm
PL 32 Dreieck
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
22,5 mm
20 mm
22 mm
18,5 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
22 mm
16,9 mm
20 mm
PLEATED BLINDS
Bk
B1
W W
Note
• Bk + B2k always add width A!
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
• Also asymmetrically possible.
Pleated blind “Type PL 32 D”
A
Fitting Situations:
Angled / Horizontal
Bk
B1
B2k
B2k
H
controlcontrol
ovládání
H
Limit dimensions of pleated blinds
Width
(A)
min max min max min max min max
300 mm 1500 mm 70 mm 100 mm 1200 mm 300 mm 2000 mm 15° 70°
*The minimum top width when using the loop cord is 80 mm.
Upper
width (B1)*
Overhang
(Bk/B2k)
Height
(H)
Angle
(W)
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max min max
300 mm 1500 mm 120 mm 100 mm 1000 mm 300 mm 2000 mm 25° 70°
Upper
width (B1)
Overhang
(Bk/B2k)
Height
(H)
Angle
(W)
20 mm
Package Height
Blind Height Package Height
22 mm
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
mm
11,6
16,9 mm
20 mm
Proles Color
white black-brown
silver anthracite
Limit dimensions of pleated blinds
Width
(A)
min max min max min max min max
300 mm 1500 mm 70 mm 100 mm 1200 mm 300 mm 2000 mm 15° 70°
*The minimum top width when using the loop cord is 80 mm.
Upper
width (B1)*
Overhang
(Bk/B2k)
22,5 mm
Height
(H)
18,5 mm
Angle
(W)
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max min max
300 mm 1500 mm 120 mm 100 mm 1000 mm 300 mm 2000 mm 25° 70°
Upper
width (B1)
Overhang
(Bk/B2k)
Height
(H)
Angle
(W)
W
A
Fitting Situations:
Angled / Horizontal
Note
• Bk + B2k always add width A!
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
• Also asymmetrically possible.
W
ovládání
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
22 mm
16,9 mm
20 mm
mm
11,6
22,5 mm
18,5 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Pleated blind “Type PL 33”
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
11,6
mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
22 mm
16,9 mm
20 mm
22 mm
16,9 mm
20 mm
22 mm
16,9 mm
20 mm
11,6
mm
B1
Limit dimensions of pleated blinds
Width
(A)
min max min max min max
300 mm 1200 mm 70 mm 300 mm 2000 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Upper width
(B1)*
Height
(H)
Angle
(W)
Limit dimensions of honeycomb pleated blinds
Width
(A)
H
min max min max min max
300 mm 1200 mm 120 mm 300 mm 2000 mm 25° 80°
Upper width
(B1)
Height
(H)
Angle
(W)
control
ovládání
W
A
Fitting Situations:
Angled / Horizontal”
Note
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
Pleated blind “Type PL 33D”
B1
20 mm
Package Height
mm
Blind Height Package Height
22 mm
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
11,6
16,9 mm
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm
Limit dimensions of pleated blinds
Width
(A)
min max min max min max
300 mm 1200 mm 70 mm 300 mm 2000 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Upper width
(B1)*
Height
(H)
Angle
(W)
20 mm
mm
11,6
H
control
ovládání
W
A
Fitting Situations:
Angled / Horizontal”
Note
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max
300 mm 1200 mm 120 mm 300 mm 2000 mm 25° 80°
Package Height
Blind Height Package Height
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
Proles Color
white black-brown
silver anthracite
52
Upper width
(B1)
Height
(H)
Angle
(W)
22 mm
16,9 mm
18,5 mm
22,5 mm
20 mm
mm
11,6
H
H
A
A
B1
B1
Bk
Bk
B2k
B2k
!
!
H
A
B1
Bk
B2k
!
!
Measuring and assembly of pleated blinds PL 30 aPL 31
B
B
B2
B2
B
B2
!
Assembly to rafters - CA xation
(assembly to window beading)
PLEATED BLINDS
Bk
B1
A
B2k
Window pane
Minimum depth
100 mm
Pleated blind
H
A
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly under rafters - CB xation
(assembly to frame using wall bracket)
Bk
Note:
The slope can be left or right. It is measured in the horizontal plane.
B1
A
Orientation of the slope is determined by the height H left or right in the order form.
B2k
H
X
Window pane
Minimum depth
100 mm
Pleated blind
A
Recess size
X = Desired Overlap
Please consider the air ventilation gaps at
!
the top and bottom as well as the thickness
of mounting prole for the lenght (H).
Order width* = A, B1, Bk and B2k
(light dimensions)
Order height = H minus ventilation
gaps and mounting
prole if it should be
used.
Controlling dimension = B and B2
*The necessary reductions are determined by the
manufacturer.
Please consider the air ventilation gaps at
the top and bottom as well as the thickness
!
of mounting prole for the lenght (H).
Please pay attention to window furniture.
X
Order width* = A, B1, Bk and B2k including
desired overlaps X
Order height = H minus ventilation gaps and
mounting prole if it should be
used (eventually consider desired
overlaps X).
Controlling dimension = B and B2 including
desired overlaps X
Note for assembly using bracket:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Measuring and assembly of pleated blinds PL 32, PL 32 D, PL 33, PL 33 D
Assembly to rafters - CA xation
(assembly to window beading)
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Bk
B2k
H
Window pane
Minimum depth
100 mm
Pleated blind
A
Please consider the air ventilation gaps at
the top and bottom as well as the thickness
!
of mounting prole for the lenght (H).
Order width* = A, Bk and B2k (light dimensions)
Order height = H minus ventilation gaps and
mounting prole if it should be
used.
Controlling dimension = B and B2
* The necessary reductions are determined
A
by the manufacturer.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Assembly under rafters - CB xation
B
X
X
X
H
B
Bk B2k
B2
!
(assembly to frame using wall bracket)
Bk B2k
H
X
X
X
B
Window pane
Minimum depth
100 mm
Pleated blind
X
A
Recess size
X = Desired Overlap
Please consider the air ventilation gaps at
!
the top and bottom as well as the thickness
of mounting prole for the lenght (H).
Please pay attention to window furniture.
Order width* = A, Bk and B2k including desired
X
Order height = H minus ventilation gaps and
overlaps X
mounting prole if it should be
used (eventually consider desired
overlaps X).
Controlling dimension = B and B2 including
desired overlaps X
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Note
Air Circulation
Pleated blinds in conservatories are an ideal, functional sun
protection. This requires adequate ventilation and air circulation.
100
100
50
Please consider the air ventilation gaps at the top
and bottom.
25 25
Blind height
Anlagenhöhe
Blind Height
50
Insucient ventilation and air circulation can cause condensation.
No warranty for material damage caused by dripping
condensation water and sharp glass cleaner, which encounter
directly or indirectly with the fabric. Also no warranty for insect
excrements.
Assembly spaces
Please leave a minimum space of 100 mm between the Cosior
pleated blind and the window pane and at least 50 mm at the top
and bottom between the mounting prole and the wall to ensure
sucent circulation.
Displayed mounting prole is not part of delivered pleated blinds.
Note for assembly using bracket:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Note
• Please always measure indoors.
• Distance of tensioned wire is max. 250 mm!
Due to the prole location in the corner, there are areas
!
which are not shaded!
These areas are not reaseon for complaint.
Please Note:
No warranty on glass damages that occur after the installation of
pleated blinds.
54
Basic Product Specication
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
22,5 mm
Pleated blind “Type PL 40”
W
C
Limit dimensions of pleated blinds
Width
(A)
min
300 mm 1500 mm 1100 mm 2300 mm 300 mm 4000 mm 100 mm 2000 mm 5° 60°
* depending on fabric width
max
do45°
do60°
max
Slope
width
max* min max min max min max
Height 1
(H)
Limit dimensions of honeycomb pleated blinds
- this type of pleated blinds is not deliver with honeycomb fabric
H
Package Height
Blind Height Package Height
control
ovládání
22,5 mm
22,5 mm
Height 2
(C)
PLEATED BLINDS
Angle
(W)
A
Fitting Situations:
Angled / Horizontal
Note
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
• Also asymmetrically possible.
500 mm ca. 60 mm
1000 mm ca. 70 mm
1500 mm ca. 80 mm
2000 mm ca. 90 mm
2500 mm ca. 100 mm
3000 mm ca. 110 mm
3500 mm ca. 120 mm
4000 mm ca. 130 mm
Proles Color
white black-brown
silver anthracite
22 mm
22,5 mm
18,5 mm 18,5 mm
16,9 mm
18,5 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
H
C
A
Measuring and assembly of pleated blinds PL 40
B
B
Assembly to rafters - CA xation (assembly to window beading)
Window pane
Minimum depth
100 mm
Pleated blind
Please consider the air ventilation gaps at
the top and bottom as well as the thickness
!
of mounting prole for the lenght (H).
A
H
C
A
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly under rafters - CB xation
(assembly to frame using wall bracket)
Window pane
Minimum depth
100 mm
Pleated blind
X
C
X
X
X
H
X
X = Desired Overlap
A
Recess size
X
Order width* = A (light dimensions)
Order height 1 = H minus ventilation gaps and
mounting prole if it should be
used.
Order height 2 = C minus ventilation gaps and
mounting prole.
Controlling dimension = B
*The necessary reductions are determined by the
manufacturer.
Please consider the air ventilation gaps at
the top and bottom as well as thethickness
!
of mounting prole for the lenght (H).
Please pay attention to window furniture.
Order width = A including desired overlaps X
Order height 1 = H minus ventilation gaps and
mounting prole if it should
be used (eventually consider
desired overlaps X).
Order height 2 = C minus ventilation gaps and
mounting prole if it should
be used (eventually consider
desired overlaps X).
Controlling dimension = B including desired
overlaps X
A
Note for assembly using bracket:
• Dimension H = upper prole.
Note:
The slope can be left or right. It is measured in the horizontal plane.
• Clip and bracket require another 4,5 mm each.
Orientation of the slope is determined by the height H left or right in the order form.
Note
Air Circulation
100
50
100
50
25 25
Blind Height
Anlagenhöhe
Please consider the air ventilation gaps at the top and bottom.
Note
• Please always measure indoors.
• Distance of tensioned wire is max. 250 mm!
Pleated blinds in conservatories are an ideal, functional sun
protection. This requires adequate ventilation and air circulation.
Insucient ventilation and air circulation can cause condensation.
No warranty for material damage caused by dripping
condensation water and sharp glass cleaner, which encounter
directly or indirectly with the fabric. Also no warranty for insect
excrements.
Assembly spaces
Please leave a minimum space of 100 mm between the Cosior
pleated blind and the window pane and at least 50 mm at the top
and bottom between the mounting prole and the wall to ensure
sucent circulation.
Displayed mounting prole is not part of delivered pleated blinds.
Please Note:
No warranty on glass damages that occur after the installation of
pleated blinds.
56
Basic Product Specication
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
22 mm
16,9 mm
11,6
mm
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
20 mm
22,5 mm
22 mm
16,9 mm
11,6
mm
20 mm
Pleated blind “Type PL 41”
PLEATED BLINDS
Bk B1
W
C
A
Fitting Situations:
Angled / Horizontal
Note:
• B1 + Bk always add width A!
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
Limit dimensions of pleated blinds
Width
(A)
min max min* max min max min max min max min max
300 mm 1500 mm 70 mm 1450 mm 50 mm 1200 mm 300 mm 4000 mm 100 mm 2000 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Small width
(B1)
Overhang
(Bk/B2k)
Limit dimensions of honeycomb pleated blinds
H
control
ovládání
Width
(A)
min max min max min max min max min max min max
300 mm 1500 mm 120 mm 1450 mm 50 mm 1000 mm 300 mm 4000 mm 100 mm 2000 mm 25° 80°
Small width
(B1)
Overhang
(Bk/B2k)
Package Height
Blind Height Package Height
500 mm ca. 80 mm
1000 mm ca.90 mm
1500 mm ca. 100 mm
2000 mm ca. 110 mm
Proles Color
white black-brown
silver anthracite
Height 1
(H)
Height 1
(H)
Height 2
Height 2
20 mm
22 mm
22,5 mm
22,5 mm
(C)
(C)
Height 3
(H-C)
Height 3
(H-C)
mm
11,6
16,9 mm
18,5 mm 18,5 mm
20 mm
Angle
(W)
Angle
(W)
mm
11,6
Pleated blind “Type PL 42”
Bk B2k
W W
C
Fitting Situations:
Angled / Horizontal
B1
A
Limit dimensions of pleated blinds
Width
(A)
min max min* max min max min max min max min max
300 mm 1500 mm 70 mm 1450 mm 50 mm 1200 mm 300 mm 4000 mm 100 mm 2000 mm 15° 80°
*The minimum top width when using the loop cord is 80 mm.
Small width
(B1)
Overhang
(Bk/B2k)
Height 1
(H)
Height 2
(C)
Height 3
Limit dimensions of honeycomb pleated blinds
Width
(A)
min max min max min max min max min max min max
H
300 mm 1500 mm 120 mm 1450 mm 50 mm 1000 mm 300 mm 4000 mm 100 mm 2000 mm 25° 80°
control
ovládání
Small width
(B1)
Overhang
(Bk/B2k)
Height 1
(H)
Height 2
20 mm
Height 3
(C)
Package Height
mm
Blind Height Package Height
500 mm ca. 80 mm
1000 mm ca.90 mm
1500 mm ca. 100 mm
2000 mm ca. 110 mm
22 mm
22,5 mm
11,6
16,9 mm
(H-C)
(H-C)
20 mm
Angle
(W)
Angle
(W)
mm
11,6
Note:
• B1 + Bk + B2k always add width A!
• Tension Wires are UV-resistant and made
of black coated steel wire.
• Operating rod is possible.
• Also asymmetrically possible.
Proles Color
white black-brown
silver anthracite
22,5 mm
18,5 mm 18,5 mm
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
H
C
A
B1Bk
Measuring and assembly of pleated blinds PL 41
B
B
B1
Bk
Assembly to rafters - CA xation (assembly to window beading)
B1Bk
H
C
A
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the
order form.
Assembly under rafters - CB xation
(assembly to frame using wall bracket)
B1
X
X
X
X
C
X
H
Window pane
Minimum depth
100 mm
Pleated blind
A
Window pane
Minimum depth
100 mm
Pleated blind
X
X = Desired Overlap
A
Recess size
X
Please consider the air ventilation gaps at the top
and bottom as well as the thickness of mounting
!
prole for the lenght (H).
Order width* = A, B1, Bk and B2k (light dimensions)
Order height 1 = H minus ventilation gaps and mounting
prole if it should be used.
Order height 2 = C minus ventilation gaps and mounting
prole.
Controlling dimension = B
* The necessary reductions are determined by the
manufacturer.
Please consider the air ventilation gaps at the top
!
and bottom as well as the thickness of mounting
prole for the lenght (H).
Please pay attention to window furniture.
Order width = A, B1, Bk and B2k including desired
overlaps X
Order height 1 = H minus ventilation gaps and mounting
prole if it should be used (eventually
consider desired overlaps X).
Order height 2 = C minus ventilation gaps and mounting
prole if it should be used (eventually
consider desired overlaps X).
Controlling dimension = B including desired overlaps X
A
Note for assembly using bracket:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Note
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the
order form.
58
X
X
X
X
X
X
H
C
A
B1
Bk B2k
H
H
C
C
A
A
B1Bk
B1
X
X
X
X
X
B
B
Measuring and assembly of pleated blinds PL 42
Assembly to rafters - CA xation (assembly to window beading)
C
Note:
The slope can be left or right. It is measured in the horizontal plane. The
area of overhang is determined as Bk = left or B2k = right from inside the
room.
Assembly under rafters - CB xation
(assembly to frame using wall bracket)
C
Note:
The slope can be left or right. It is measured in the horizontal plane. The
area of overhang is determined as Bk = left or B2k = right from inside the
room.
Note
Bk B2k
B1
H
A
Bk B2k
50
B1
X
X
X
100
25 25
X
H
X
X
A
Blind Height
Anlagenhöhe
Window pane
Minimum depth
100 mm
Pleated blind
A
Window pane
Minimum depth
100 mm
Pleated blind
X
X = Desired Overlap
A
Recess size
100
50
Please consider the air ventilation gaps at the top
!
and bottom as well as the thickness of mounting
prole for the lenght (H and C).
Order width* = A, B1, Bk and B2k (light dimensions)
Order height 1 = H minus ventilation gaps and mounting
prole if it should be used.
Order height 2 = C minus ventilation gaps and mounting
prole.
Controlling dimension = B
* The necessary reductions are determined by the
manufacturer.
Please consider the air ventilation gaps at the top and
!
bottom as well as the thickness of mounting prole
for the lenght (H).
Please pay attention to window furniture.
Order width = A, B1, Bk and B2k including desired
X
Order height 1 = H minus ventilation gaps and mounting
overlaps X
prole if it should be used (eventually
consider desired overlaps X).
Order height 2 = C minus ventilation gaps and mounting
prole if it should be used (eventually
consider desired overlaps X).
Controlling dimension = B including desired overlaps X
Note for assembly using bracket:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Air Circulation
Pleated blinds in conservatories are an ideal, functional sun
protection. This requires adequate ventilation and air circulation.
Insucient ventilation and air circulation can cause condensation.
No warranty for material damage caused by dripping
condensation water and sharp glass cleaner, which encounter
directly or indirectly with the fabric. Also no warranty for insect
excrements.
Assembly spaces
Please leave a minimum space of 100 mm between the Cosior
pleated blind and the window pane and at least 50 mm at the top
and bottom between the mounting prole and the wall to ensure
sucent circulation.
Displayed mounting prole is not part of delivered pleated blinds.
PLEATED BLINDS
Please consider the air ventilation gaps at the top
and bottom.
Note
• Please always measure indoors.
• Distance of tensioned wire is max. 250 mm!
Please Note:
No warranty on glass damages that occur after the installation of
pleated blinds.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Pleated blinds shapes SD and SR
Verspannte Anlagen, feststehend und beweglich
für Dreieck- und Rundbogenfenster
60
20 mm
20 mm
11,6 mm
11,6 mm
20 mm
11,6 mm
H
A
20 mm
20 mm
11,6 mm
11,6 mm
SR 1 Halbkreis feststehend
20 mm
11,6 mm
H
A
20 mm
Basic Product Specication
20 mm
20 mm
11,6 mm
11,6 mm
A
A
SR 1 Halbkreis feststehend
H
A
A
SR 1 Halbkreis feststehend
H
20 mm
11,6 mm
H
20 mm
20 mm
11,6 mm
11,6 mm
B
Pleated blind “Type SD 2”
SD 2 Dreieck feststehend
PLEATED BLINDS
Limit dimensions of pleated blinds
Width (A) Height (H)
min max* min max
200 mm 1600 mm 200 mm 1600 mm
*depending on fabric width
A
Fitting Situation:
Vertical
Pleated blind “Type SD 3”
A
Limit dimensions of honeycomb pleated
blinds
H
20 mm
11,6 mm
- this type of pleated blinds is not deliver
with honeycomb fabric
Proles Color
white black-brown
silver anthracite
20 mm
11,6 mm
Limit dimensions of pleated blinds
Width (A) Slope width Height (H)
min max max* min max
200 mm 2000 mm 2300 mm 200 mm 2000 mm
*depending on fabric width
Limit dimensions of honeycomb pleated
blinds
20 mm
11,6 mm
- this type of pleated blinds is not deliver
with honeycomb fabric
Proles Color
white black-brown
silver anthracite
11,6 mm
20 mm
Fitting Situation:
Vertical
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
X
X
X
X
X
X
H
A
Measuring and assembly of pleated blinds SD 2
B
B
H
20 mm
11,6 mm
H
20 mm
11,6 mm
H
A
B
H
20 mm
20 mm
11,6 mm
11,6 mm
H
A
B
H
A
20 mm
20 mm
11,6 mm
11,6 mm
Assembly to window beading - CA xation
Angled frame
Window pane
H
Minimum depth
21 mm
Order width
Straight frame
Window pane
A
Minimum depth
21 mm
Order width
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly to frame (using wall bracket) - CB xation
H
A
X = Desired Overlap
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
X
X
X
Pleated blinds for conservatories
Minimum distance to window pane is 100 mm.
!
Order dimension* = A and H (light
dimensions)
Controlling dimension = B
*The necessary reductions are determined by the
manufacturer.
Please specify if frames are angled or straight.
Please pay attention to window furniture.
Order dimension = and H including
desired overlaps X
Controlling dimensions = B including desired
overlaps X
Note:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Measuring and assembly of pleated blinds SD 3
Assembly to window beading - CA xation
Angled frame
Window pane
Minimum depth
21 mm
Order width
Pleated blinds for conservatories
Minimum distance to window pane is 100 mm.
!
Order dimension* = A and H (light dimensions)
*The necessary reductions are determined by the
Straight frame
Window pane
Minimum depth
A
Note:
The slope can be left or right. It is measured in the horizontal plane.
21 mm
Order width
manufacturer.
Please specify if frames are angled or straight.
Orientation of the slope is determined by the height H left or right in the order form.
Assembly to frame (using wall bracket) - CB xation
XX
X
X = Desired Overlap
Note:
The slope can be left or right. It is measured in the horizontal plane.
Orientation of the slope is determined by the height H left or right in the order form.
62
Please pay attention to window furniture.
Order dimensions = A and H including desired
overlaps X
Note:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
5 mm
5 mm
5 mm
Note
5 mm
5 mm
5 mm
Distance Between Blind
and Window Pane
= 5 mm
Attention
Pleated blinds for
conservatories - distance
between blind and
window pane = 5 mm
Due to the prole location in the
corner, there are areas which are
not shaded!
Example of pleated blind SD 2
Příklad typu SD 2
PLEATED BLINDS
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Basic Product Specication
20 mm
11,6 mm
22 mm
20 mm
11,6 mm
22 mm
20 mm
11,6 mm
22 mm
Pleated blind “Type SR 1 S”
B1.
A
H
control
ovládání
Limit dimensions of pleated blinds
Width (A) Upper rail width (B1) Height (H)
min max min max
300 mm 1500 mm cca 80 mm 300 mm 1500 mm
Limit dimensions of honeycomb pleated blinds
Width (A) Upper rail width (B1) Height (H)
min max min max
300 mm 1200 mm cca 80 mm 300 mm 1200 mm
Fitting Situation:
Vertical
Note
Due to the curvature and the diagonal lead cord,
the ends of the hinge bulge simultaneously that
pleated blinds are pushed upwards. This is a
technicalreasons and did not justify the complaint.
Package Height
Blind Height Package Height
500 mm ca. 50 mm
1000 mm ca. 60 mm
1500 mm ca. 70 mm
Proles Color
white black-brown
silver anthracite
20 mm
22 mm
22,5 mm
11,6 mm
16,9 mm
18,5 mm
64
Measuring and assembly of pleated blinds SR 1 S
Assembly to window beading - CA xation
Angled frame
Window pane
Minimum depth
H
Straight frame
A
Assembly to frame (using wall bracket) - CB xation
H
21 mm
Order width
Window pane
Minimum depth
21 mm
Order width
X
X
PLEATED BLINDS
Order dimension* = A and H (light dimensions)
*The necessary reductions are determined by the
manufacturer.
Please specify if frames are angled or straight.
For round blinds, please supply a template
!
on scale of 1:1.
Please pay attention to window furniture.
Order dimensions = A and H including desired
overlaps X
Note:
• Dimension H = upper prole.
• Clip and bracket require another 4,5 mm each.
Note
A
5 mm
Distance between blind
and window pane = 5 mm
5 mm
5 mm
X = Desired Overlap
When ordering these blinds, please supply
a dimension drawing with all required blind
!
sizes. For round blinds, please supply
a template on scale of 1:1.
Given that the prole is located in the arc will
generate surfaces which are not obscured.
These surfaces are not a reason for complaint.
Pleated blinds shapes SD and SR Pleated blinds for conservatories PL Roof pleated blinds DFC Freehanging pleted blinds F Pre-tensioned pleated blinds VS
Note:
66
Note:
ISOTRA a.s.
Bílovecká 2411/1, 746 01 Opava
Czech Republic
Tel.: +420 553 685 111
Fax: +420 553 685 110
E-mail: isotra@isotra.com
www.isotra.com
Released: 06/2019
ISOTRA Partner
Loading...