March 2004
Multi award winning power management systems
Solus Instruction Manual
March 2004
Contents
General section
A. Introduction
B. The product
C. Installation
D. Troubleshooting
E. Specifications
F. Considerations
G. Warranty
The company A.1
The principles A.1
The execution A.1
Overview B.2
Features B.2
Safety B.3
Placement C.3
Equipment coupling C.3
System integration C.3
Fault finding D.4
Dimensions & sockets E.5
Cabling F.6
Third party products F.6
Upgrades F.6
G.7
March 2004
A. Introduction
The company
Multi award winning power management systems
The company
The principles
The execution
IsoTek was formed in July 2001 with the vision to create high quality
mains power distribution units that moved beyond current
conventions. Through careful market analysis and extensive research
we were able to launch products that moved power distribution
forward to be recognised as an integral part of any audio or home
theatre system. Our products continue to lead the way in power
management systems, our latest GII range galvanises our commitment
to pursue excellence at every level.
We believe all products benefit from their own clean power supply,
therefore we advocated the concept of using (smaller) individual filters
on each component, with these being specifically designed for their
purpose, this dramatically reduces and stops component cross
contamination and dispels the belief that one size fits all. Every single
component used in our designs is extensively tested for quality,
reliability and purpose. Our circuit designs are extensively ‘field’ tested
before coming to market so we can guarantee the widest compatibility
with third party products.
Within the market of premium audio it is vital to offer exceptional
performance and value for money. Products must be made to the
highest of standards, be reliable and attractive. A manufacturer must
offer exceptional service, dealer training, support and undertake the
very best in promotion design and literature. If all these elements are in
place customers should experience excellence at every stage. Our
continual quest is to meet these challenges.
All of our products are professionally designed, manufactured and
hand built in the UK, with deep consideration given to both style,
functionality, performance and value for money.
March 2004
B. The product
Front elevation of the unit
!
20Kg
Overview
Features
Safety
Thank you for purchasing our Solus.
The Solus is our one of our entry level 6-way filters which has the
option of upgrade to the more sophisticated GII Mini Sub. The Solus
was designed to be a very rewarding single box ‘plug-n-play’ solution
for a complete audio or home theatre system.
At the rear of the unit you will note six high quality outlets, these not
only allow you to tidy up the system but provide an ideal environment
for equipment to function. Through a cunning star earthed system the
Solus reduces the ability of the six outlets to cross contaminate,
effectively stopping components ‘talking’ to each other or corrupting
the clean supply provided by the unit. The full star system not only acts
as a non release pressure valve for mains noise but also gives the
effect of individual spurs for each piece of equipment. This is a far
more desirable solution than physically changing the wiring in your
home.
In the interest of safety the unit should be placed upon its own
dedicated shelf on an audio grade equipment rack. The unit may be
placed on top of or under other pieces of equipment, do not exceed a
maximum weight loading of 20kg.
Do not place the Solus in areas where the temperature is likely to
exceed 25 degrees. For example, close proximity to ‘tube’ amplifiers.
If you have to locate the unit on the floor we strongly recommend you
do not place the unit near heat sources, such as radiators or air ducts.
Good air circulation is essential to prevent heat build up within the
chassis. Do not place the Solus on a soft surface, for example a rug or
carpet, which could block the ventilation intakes on the underside of
the unit. Do not let any liquids spill onto or objects fall into the chassis.
Should either of these events happen, immediately switch off the unit
at the wall socket, wait for at least one minute, unplug all other cables
and return it to your authorised IsoTek dealer for a full service.
March 2004
C. Installation
Front & rear of the unit
Laser etched product name badge
Official GII laser etched badge
LED indicator light
IEC Inlet
Dedicated earth post
6 high quality UK three pin outputs
Placement
Equipment
coupling
System integration
Ideally the unit should be placed upon its own dedicated shelf of an
audio grade equipment rack. If this is not possible the unit may be
placed on top of or under other pieces of equipment to a maximum
weight limit of 20kg. Due to the products careful screening by way of a
large ground plan within the unit, no adverse effects should be caused
by this placement. If you have to locate the unit on the floor or in any
other location please refer to the safety section of this manual.
Once the Solus is placed connect the unit to a mains wall socket, we
recommend that a good quality cable is used and that the wall socket
is also unswitched. Turn off all equipment you wish to have a clean
mains supply, unplug the cables relating to these from the wall socket
or redundant distribution block you may have been using and plug
these into the rear sockets of the Solus. The Solus utalises our
propriatery ‘Polaris-X’ technology to reduce product cross
contamination but at the same time supplying a high current rating to
all outlets. This is subject to the total power consumption being less
than 2.4kw.
We strongly recommend that a good quality mains cable is used and
this cable is consistent throughout your system. Look for a cable with
good conductors, for example oxygen free copper, this cable should
also have a high degree of shielding from RFI.
March 2004
D. Troubleshooting
Fuse location
Fuse holder of IEC inlet
Fuse in UK three pin plug
Fault finding
The front panel LED is not lit and the unit gives no power.
Check that the mains inlet fuse is intact, this will be located in the
drawer of the IEC socket at the rear of the unit on the left hand
side. If there is not a fuse located or you have used up your supply
please contact us on 01635 291357 or email
support@isoteksystems.com so that we can forward you a free
replacement.
Check that the mains cable is securely plugged into the unit and
the wall socket.
Check the fuse within the plug is intact.
On rare occasions the fuse at the main distribution fuse box may
also need to be checked.
March 2004
E. Specifications
Front & rear elevation
Dimensions
& sockets
The following information relates only to the IsoTek Solus. These are
original products and should not be confused with previous or ‘copy
cat’ models.
Number of outlets: 6
Type of outlets: 13A UK unswitched
Standard mains inlet: IEC fused
Mains voltage: 110 - 264VAC
Maximum current (typical to location used) 13Amps (UK)
Total maximum current 18Amps
External mains fuse 6.3Amps (filter block circuit)
Dimensions: 444mm x 85mm x 305mm (WxHxD)
Weight: 6.0Kg
Please note, the information given in this document is correct at the
time of print. Small production changes in the course of improvement
through our ongoing research and development policy may arise. If
clarification of any point is required please refer to your local
authorised IsoTek dealer or visit www.isoteksystems.com where you
can download the very latest information.
March 2004
F. Considerations
Product examples
IsoTek Titan
IsoTek Cables
Cabling
Third party
products
Upgrades
We strongly recommend that a good quality mains cable is used and
this cable is consistent throughout your system. Look for a cable with
good conductors, for example OFC (oxygen free copper). This cable
should also have a high degree of shielding from RFI. Outside of the
UK it is not uncommon for cables of 6Amps current capability to be
connected to a 20Amp outlet. In practice this seems to be a safe
arrangement. However we strongly recommend a cable of the full
20Amps carrying capability be used, with a minimum 1.5mm squared.
IsoTek produce their own cable in standard 1.5M lengths. All cables
feature high quality connectors, OFC conductors and fully earth
shielded. This removes any chance of RFI entering the cable. Four
versions are available: Premium and Elite as well as higher current
Optimum. IsoTek 24ct high grade connectors are used in the Elite,
Optimum designs these can also be purchased individually.
Our GII range of products work well with all third party equipment
including varying cable technologies. If ‘off-the-shelf’ mains cables are
used we recommend the use of Ferrite rings to reduce RFI. We also
recommend the use of contact conditioners, for example Blue
Horizon’s Clean-IT (www.bluehorizonideas.com). Isolation devices, feet
and cones may also be used. We recommend Clearlight Audio RDC
products which we use on our higher end products, for example, Titan.
It is possible to increase the performance of the Solus through ideal
location and product placement, the use of isolation devices and
contact conditioners for example. The Solus can also be used to
run front-end only equipment with one of our dedicated power
amplifier products. For example, the introduction of a Titan for that
specific purpose. Full details can be found from your local authorised
IsoTek dealer or on our web site www.isoteksystems.com
March 2004
Please complete & send
G. Warranty
As part of our on-going commitment to the highest standards of customer service, IsoTek offers
you the opportunity to extend the standard 2 year product warranty to 3 years, free of charge.
Simply visit:
www.isoteksystems.com/register
And follow the on screen instructions. This service will automatically update your details and
give confirmation of your registration via email within 24 hours.
IsoTek will not share your personal details with any third parties without your permission.
If you do not have internet access then please forward a copy of your invoice, together with the
product serial number and your address to our UK office:
IsoTek Systems,
4 Mozzetta,
Kings Head Yard,
Winchester,
SO23 9HN
England.
Loading...