Isoplam L030001, L030003 User Manual And Spare Parts List

1

CONCRETE POWER TROWEL

REVOLVING

CIRCLE

MANUALE USO E MMANUALE USO E MANUTENZIONE - RI

USER MANUAL AND SPARE PARTS LIST

CAMBIANUTENZIONE - RICAMBI
BUSINESS MAN MANU

2

Business Man Manual – Parts book

ISOPLAM S.r.l.

Address:

Via E.Mattei, 4

31010 Maser (TV) Italy

Tel. [phone]

E-mail: [e-mail]

Web: www.isoplam.it

CONCRETE POWER TROWEL
L030001 - L030003 REVOLVING

CIRCLE

SERIAL NUMBER …………….

3

GENERAL SAFETY GUIDELINES

Failure to follow instructions in this manual may lead to serious injury or even death! This

equipment is to be used by qualified and trained personnel only. This equipment should

not be operated by persons under 18 years of age.

1. Always use proper heavy lifting techniques when moving equipment.

2. Always make sure that machine is kept in proper operating condition.

3. Always have throttle position at idle while starting engine.

4. Always check to make sure that operating area is clear before starting engine.

5. Always test safety equipment including the safety engine kill mechanisms before

operating equipment.

6. Never place feet on or inside the guard ring while starting the engine.

7. Never operate this equipment without proper protective clothing including footwear.

8. Always keep clear of rotating parts when operating.

9. Never operate with belt guard or any other guards removed.

10. Never leave machine unattended while running.

11. Never refuel while engine is running or while engine is hot.

12. Always refuel in a well ventilated area, away from sparks and open flames.

13. Never smoke while refuelling.

14. Exhaust fumes are lethal! Operate machine in a well ventilated area, away from

places where fumes can accumulate.

4

SAFETY INFORMATION

FOLLOW ALL SAFETY INSTRUCTIONS

Read all safety instructions carefully. Safety instructions will be found throughout this

manual and on the machine. Keep all safety information in good, readable condition. If

needed, replacement safety information is available.

Proper machine operation includes training for operators. Operators should be versed on

machine safety and operation. Never allow a person who is not properly trained to operate

this equipment. Keep this machine in proper working condition. This includes keeping all

safety decals on the machine clean and visible.

Do not modify this machine. Doing so may cause improper operation and may not be safe.

This may also reduce machine life. Modifying this machine in any way will void the

warranty.

OPERATE MACHINE SAFETY

Always be aware of the operational area of your machine. Operators need to be careful to

keep bystanders and nearby objects at a safe distance from the machine. Never let

someone who is untrained operate this machine.

Study the operational area carefully. Remove all dangerous objects from the finishing area

(i.e. protruding rebar or wood). Do not attempt to use the machine to use the machine

where operation appears to be dangerous.

Keep the machine properly maintained and in good working order. This mainly entails

keeping the machine clean and serviced. This will allow the finisher to perform to it’s fullest

potential and provide the longest operational lifetime. Check the safety kill switch before

and after every operation. It is good practice to stop the machine with the safety kill switch,

to ensure it is operating properly.

Always try to do most work during daylight hours or with sufficient artificial lighting.

Visibility must be good for this machine to be used effectively.

Never operate machinery when tired or ill. Operators must be alert and always looking for

possible signs of danger or misuse of machinery. Do not operate the machine in

dangerous surroundings.

5

FUEL

FUEL

Handles fuel safely. Motor fuels are highly flammable and can be dangerous if mishandled.

Do not smoke while refuelling. Do not refuel if the engine is hot and running.

Always shut off fuel flow with the fuel line valve after every machine use. Never store the

machine with fuel in the tank for any extended period of time.

Clean up spilled fuel immediately.

PERSONAL PROTECTIVE EQUIPMENT

Always wear proper clothing while operating this equipment. Protective clothing includes

(but is not limited to): boots, long sleeve shirt, long pants, gloves, hearing protection and

safety eyeglasses. Consult with the construction site foreman to determine what protective

clothing is required on the construction site.

HAZARDOUS MATERIALS

Exposure and mishandling of hazardous material can cause personal injury or damage the

environment. Potentially hazardous material used on this machine may include the

following: lubricant, fuel, paints and adhesives.

Take care to handle hazardous material properly. MSDS information sheets are available

upon request.

6

MAINTENANCE SAFETY

Cautions! Disconnect spark plug wires before attempting service.

Before attempting maintenance on this machinery, know the procedure and have the

correct tools. Always make sure that machine is stopped and the spark plug wires are

disconnected before attempting service. Securely support any machine components that

must be raised for service (i.e. trowel arms). Never lubricate the machine or attempt

service on a running machine. Always allow the machine proper time to cool before

servicing.

Keep machinery in proper running condition. Make sure that there is no build up of

concrete, grease, oil or debris. Keep all parts properly installed. Fix damage immediately

and always replace worn or broken parts.

Dispose of potentially hazardous waste properly. Examples of potentially hazardous waste

are: motor oil, fuel and filters.

Use rigid containers for trapping these items. Do not use old food or beverage containers,

someone may be mislead. Do not pour waste oil or fuel directly onto the ground, down a

drain or into any water source.

Inquire what the proper disposal procedures are for waste fuel and oil in your local area.

7

TROWEL FINISHER SERIES----INSTRUCTIONS

Putting Into Service

Before packing and shipping, this power Trowel was run and tested at the factory.

If there are any problems, please let us know.

Before putting your new finisher into service, read all manuals and instructions carefully.

Improper setup, use or maintenance of your equipment could result in personal injury or

damage to equipment.

The purpose of this section of the manual is to explain the intend setup, use and

maintenance of this equipment.

ASSEMBLY

1) Connect the handle assy.

To the four bolts on gear-box. Install the shaft pin inside the yoke arm. Tightened the

handle with lock nut.

8

2) Engine mounting.

Put the engine on mounting base and install plate and spring washer lock the nut.

3) Install the drive belt.

Adjust the pulley to keep the clutch and pulley in one line.