ISON IS-DG102-F Quick Installation Quide

1

FCC MARKING

This Eq uipment has been tested a nd fo und to comply with the limits for a Class

A digita l device, pursua nt to part 15 of the FC C Rule s. These limits are

design ed to provide reasonable protection against harmful interference when

the equipment is opera ted in a c ommercial environment. This equi pment

generate s, uses, an d can radiate radio frequency energy and, if not installed

and used in accordance with the instructi on manual, may cause ha rmfu l

interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

followin g two conditio ns: (1) this device may not cause harmful interference,

and (2 ) this device must accept an y interference re ceived; including i nterference

that may c ause undesired operatio n.

CE MARKING

This equip me nt c ompl ies with the requi rements relatin g to electromagnetic

compatibility, EN 5 5022 class A fo r ITE, the e ssential p rotection requiremen t of

Council Directive 2004/108/EC on the approximation of the laws of the Member

States rel ating to electromagneti c compatibility.

Company has an on-going p olicy of upgrad ing i ts products and it may be

possible that information in thi s document is not up-to-date. Please check with

your local distri butors for the latest information. No part of th is document can be

copied or reproduced in any form without written consent from the comp any.

Trademarks :

All trade n ames and trademarks are the properties of their respe ctive

companie s.

Copyrigh t © 2013, All Rig hts Re served.

IS-DG102-F

Quick Installation Guide

2

Key Features

 Rugged design aluminum enclosur e 103.5x32x81.5mm (LxWxD)

 Supports 18V-36VAC/12V-60VDC

 Supports Link Fault Pass through (L FP) function

 Supports switch model and conve rter mode.

 Support SFP fi ber speed 100M or 1000M dua l mo de

 Surge prot ection diodes on power input.

 ESD protecti on diodes on RJ -45 port

 Provides Far End Fault function on FX port.

 Provides increased Noise Immunity

This mini, rugged Industrial Gigabit media converter is designed for Security, Transportation and Telco

application to expand your network distances. It can be powered by wide range of VAC , VDC or external

DC power adapter . With its multi-purpose design, it can also be used for Din-Rail or wall-mounted. It is an

ideal unit for IP surveillance, traffic monitoring and Security application in critical environment. It can

tolerate -40°C to 75°C in harsh environment to perform a reliable network.

3

Power connection

This unit provides 4 pin terminal block. It can be operated using either VAC or VDC power source. The VDC

power range is from 12VDC to 56VDC, and the VAC power range is from 18VAC to 36VAC. Always Make

sure your input voltage is within this supported voltage range.

WARNING – any exceeded input voltage will not make this unit function and may damage this unit.

To make power connection – Follow the printed polarity for V+, V-, Ground. Connect positive wire to V+ ,

connect negative wire to V-, also connect neutral wire to ground.

Connecting procedure

STEP 1 –

Take out 4 pin terminal block located in the included mounting kit package.

STEP 2 –

connect power wire to 4 pin terminal block. V1+, V1- or redundant power wire to V2 + V2-. and Ground

STEP 3 –

Plug into terminal block socket shown above. Polarity needs to match the V+ and V-

WARNING -- Always SHUTS OFF power source to connect power wire.

+ V1 - + V2 -

Din Rail Bracket x 1

Wall mount bracket x 2

4 pin Terminal Block x1

Installation package

This unit can be installed by din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted bracket

are included.