Instruction for iPhone
id Smart Box
868MHz wireless smart home system
868MHz wireless smart home system
· ID SMART BOX
INTRODUCTION
· ID SMART BOX
HARDWARE INTERFACE
01
· TIMER CONTROL
FUNCTION
51
TIMER CONTROL
FUNCTION
· REMOTE CONTROL
FUNCTION
59
REMOTE CONTROL
FUNCTION
· FAVORITES
FUNCTION
63
FAVORITES FUNCTION
65
67
COMMON PROBLEM
RESOLUTION
· ID SMART BOX PORTABLE
EMITTER SETUP
· ID SMART BOX
UPDATE
11 19
25
27
13
15
16
03
05
10
· CENTRAL CONTROL
FUNCTION
25
OPERATION MANUAL
CONTENTS
· ID SMART BOX CONTROL
· ADD DEVICE
· DEVICE ROOM
CHANGING OPERATION
· ID SMART BOX
INTRODUCTION
· ID SMART BOX
STRUCTURE
· SETTING FUNCTION
· RENAME DEVICE
· SETTING FUNCTION
31
· FOUR FUNCTIONS
INTRODUCTION
ID SMART BOX FOUR
FUNCTIONS INTRODUCTION
CENTRAL CONTROL
FUNCTION
NOTE
SETTING INTRODUCTION ID SMART BOX INTRODUCE
Power Voltage: DC 5V-9V
Working Current：＜300mA
Standby power
consumption: ≤200mA
Rated Power: ＜2W
Protection Class: IP40
Antenna: Built-in
Control Point Number: 30
Installation: Horizontal or wall-mounted
Wireless Communication: 433MHz, 868MHz
IEEE 802.11b/g（WIFI)
Communication Distance: 35m (Indoors)
Network Port: 1×RJ45 (10/100 BaseT)
Working Temperature: -10℃ to 55℃
Storage Temperature: -40℃ to 55℃
Smart Box Size: 158mm×83mm×30mm
Specification
Power
Indicator
WiFi
Indicator
Working
Indicator
The Smart Box should be installed in the
central area of the residence at a height
of over 50 cm above the floor.
Installation may be horizontal or
wall-mounted. There should be no metal
objects shielding surrounding the Smart
Box. Other objects should be at least
15cm away from the Smart Box. The
Smart Box should be installed away from
humid environments to avoid unnecessary influence on the Smart Box. A
wireless router should be connected to
the installation position of the Smart Box
to enable access of intelligent terminals
(e.g. iPhone, iPad, etc.).
Installation Environment
ID SMART BOX
INTRODUCTION
ID SMART BOX
HARDWARE INTERFACE
Standard
Configuration
LAN port（to any LAN port
of the wireless router）
RESET Reserved
RS232
Power
DC 5V
SMART BOX | 01 SMART BOX | 02
Adapter (Plugs for different
countries optional)
Smart Box Network Cable Instruction Manual
LANEXT1 EXT2 USBRS232
Instruction for iPhone
id Smart Box
868MHz wireless smart home system
Connect the Smart Box with adapter and then connect the power supply. Connect the
LAN port of the Smart Box with the LAN Port of the home router (Note: Switch on DHCP
Dynamic Host Configuration Protocol of the WI-fi router). Wait till the indication power
indicator “ ” of the Smart Box is normal, proceed other operations.
ID SMART BOX
CONTROL
1
wiring
LAN port
2
3
Connect the mobile phone to the Wifi provided by the router connected
with the Smart Box by network cable.
· Open idSmartHome app. Enter
“admin” in user name Smart Box and “123456” in password
(modification of user name and password is detailed in Page 06 of this
manual). The user may save the user name and password. If auto login
Smart Box is checked, the user may automatically log in by clicking the icon
on the desktop.
· The device ID may be automatically obtained upon
successful login to facilitate remote control next time.
SMART BOX | 03 SMART BOX | 04
iphone
Software download
Smart Box Connection
Ordinary power
socket
Adapter (Plugs for different
countries optional)
Smart Box
The third party router
For iPhone users, download and install id SmartHome app from Apple
Store.
· The learning of the remote should be
made within the range of 0.1-5 m to the
Smart Box. After login, find the icon “ "
on the home page to enter the setup
interface.
Add Device
ADD DEVICE
SMART BOX | 05
SMART BOX | 06
Click“Room Set” Click“Add” ＋Click “+” And
Select Room Icon
Name The Room
(E.G. Master Bedroom,
Guest Bedroom)
Add The Room
Successfully
Add Room
Select “Setting”
Button
Click “433 Add”
Click“room1”
Add 433MHz device
Click “Device Set”
Select “Setting”
Button
Judgment Of 433mhz Device: Communication Mode On Nameplate Of The Device Packing Is 433mhz.
ADD DEVICE
SMART BOX | 07 SMART BOX | 08
(User-defined Device Name. Optional
Device Types: Roller Blinds, Venetian
Blinds, Curtain, Etc. Here, Take Roller
Blinds For Example)
Click To Select Any One Of
The Undefined Channels
Next
Click “Next”
ADD DEVICE
· Click Learning Button“ ”press And
Hold The “Stop” Button Of The Emitter Within 10s Till
The Hint Of “Code Learning Success” Displays (The
Emitter Has Been Matched With The Motor To Be
Added)
· After The Hint Of “Code Learning Success”
Displays, Press “Open/close/stop” Button Respectively To Test The Button. If The Corresponding Motor
May Execute “Open/close/stop” Action Properly, The
Learning Is Successful. Press “ ” Button. Pop
“ ”And click “ok” The Device Is Successfully
Added.Or Learn The Codes Again.
· Learning Of Multichannel Remote: Learn Channel By
Channel
DEVICE ROOM
CHANGING OPERATION
SMART BOX | 09 SMART BOX | 10
Select Room1 Press And Hold The
Icon Of The Device
The device name
displays (renaming
available)
Click the icon; select
the room where the
device is to be relocated.
Click
“Save”
Device SetSelect “Setting”
button
Save
ADD DEVICE
Click 868 Add
Enter device name
ROOM1
Add 868MHz device
Device Set
Select “Setting”
button
Connect The Power Supply Of
868mhz Device. Click The “Finish”
Button Within 10s After Hearing The
Continuous “Beep” Sound. One “Beep”
Sound Indicates That The Device Is Added
And The Adding Action Is Successful.
Judgment of 868MHz device: Communication mode on nameplate of the device packing is 868MHz.
ID SMART BOX SET
WITH EMITTER
SMART BOX | 11 SMART BOX | 12
Click Click “Learn” button and then press
and hold the code learning button
on 868MHz remote
Add smart scene remote
Before this operation, all required scenes should be added. Please refer to P27 for scene adding methods.
Click Click Click Select any one of the undefined channels
Click “Dashed icon” to
enter scene selection interface
OK
Remote Update Via Network Is Available
ID SMART BOX
UPDATE
SMART BOX | 13 SMART BOX | 14
Remote update of Smart Box software
The Working Indicator
In The Middle Blinks
Click
“Update”
Click
“OK”
Click
“About”
Select “Setting”
Button
Return Log-in Interface
Update Is Successful
Update
Id Smart Box enables distance control and remote control functions on
any wireless controlled motorized blinds and curtains by mobile phones
or iPad. Controls such as opening, closing, stopping and adjustment on
existing motorized blinds and curtains may be achieved by App
software without affecting the normal operation of the original
remotes. In addition, extended control may also be made on devices
such as various wireless lights and electric apparatuses.
ID SMART BOX
INTRODUCTION
Wi-Fi router
ID SMART BOX
STRUCTURE
SMART BOX | 15 SMART BOX | 16
Motorized blinds and curtains
Wireless remote
Light
Smart remote
Network Cable
id Smart Box
id Smart Box
iPad、iPhone、Android controlled
Available for 2G, 3G, 4G and Wi-Fi network
SETTING
INTRODUCTION
The Setting Function Enables Setup On User Account、host Ip、server Time、room
Set、device Set、scene Set、emitter、about.
SMART BOX | 17 SMART BOX | 18
Setting Interface
· Select “ " icon in home page; click the icon and enter system setting
interface
· System setting options: User Account、host Ip、server Time、room
Set、device Set、scene Set、emitter、about.
SETTING
FUNCTION
SMART BOX | 19 SMART BOX | 20
Add Account
· Click “ ” to enter “User Account” interface; click edit button
“ ” and then add button “ ”; enter “Add Account” interface;
input user name and password; click “OK” (only super manager can
creat new account)
· Click “ ” to delete the user
· Click cancel button “ ” to return the “User Account” interface.
AddEdit
Cnncel
SETTING
FUNCTION
SMART BOX | 21 SMART BOX | 22
SETTING
FUNCTION
· Click “ ” to enter “Host IP ” interface (modification by user not
recommended)
· After editing, click OK button “ ” to return “Setting” interface.
· Wait for 10s before making other operations.
OK
Smart Box IP Configuration
Server Time
· Click “ ” to enter “Time Modification” interface. Make modifica-
tion and then click save button “ ”.
Note: Time format is the same as that of iPhone. The 24h time system may
be set on iPhone.
OK
SMART BOX | 23 SMART BOX | 24
Please refer to room set operation in quick installation guide part of this
manual for details (P06).
Room Set
SETTING
FUNCTION
Applicable in case of newly added device set; please refer to id System
Quick Installation Guide or the instruction manual of the device to be
added for details (P06).
Device Set
· Click “ ” on the home page to enter “Setting” interface.
· Click device setting icon “ ” to enter device setting interface.
· Click the room where the device is located .
· Select and hold the device .
· Enter device name the name shall not be over 15 letters;
click save button “ ” to return “edit device” interface.
· Click “back” to return the “Device set” interface.
The device is successfully renamed.
Save
SMART BOX | 25 SMART BOX | 26
· Click “ ” on the home page to enter “Setting” interface.
· Click device setting icon “ ” to enter device setting interface.
· Click the room where the device is located .
· Click “ ” before the device.
· Click “ ”delete (Random deletion of device is not recommended)
Remove Device
RENAME
DEVICE
Delete
SMART BOX | 27 SMART BOX | 28
About (Current software version)
SETTING
FUNCTION
ID SMART BOX
FOUR FUNCTIONS
INTRODUCTION
Smart Box provides for major functions: Central control function, scene control function,
timer control function and remote control function. In addition, it supports user-defined
editing function, which enables convenient and flexible operation of the user.
SMART BOX | 29 SMART BOX | 30
02
Scene Control Function
With the help of the easy “One-button” scene switch, you’ll get rid of the embarrassment of rushing around to control different devices such as lights, motorized blinds and
curtains, AC and AV devices in different areas.
For example, after you wake up in the morning, you just need to press the scene switch
for “Wake-up Mode”, Smart Home System will automatically open the shade curtains
and window opener of the bedroom, turn off the AC system of the bedroom and turn on
the light and exhaust fan of the bathroom.
01
Central Control Function
Forget the remotes of your household appliances for AC, TV, etc. and don’t bother to
stand up to control the lights and curtains, an iPad or a smart phone is all you need to
operate any device within the Smart System within your home.
03
04
Timer Control Function
For people living a nine-to-five lifestyle like you, a more regular life is demanded. The
Timer Control Function of Smart Home System can handle many trivial things for you,
for example, timed wakeup, timed congee cooking, timed opening of AC, timed
opening of floor heating, etc. For example: At 7 a.m., the background music of the
automatic control function plays, the soft music wakes you up from the sweet dream,
the motorized blinds open gently; the lights and exhaust fan in the bathroom open;
the lights in the coatroom turn on; after you get yourself washed, the congee is ready
in perfect temperature;
Remote Control Function
For people with larger social circles like you, you would forget to turn off the
household appliances when you’re engaged in social activities. Or, when you get
home after work, the room is sweltering. You would be sweating all over before the
AC cools the room to an appropriate temperature. Smart Home System may enable
you to control the household appliances in your home even if you’re out.
FOUR FUNCTIONS
INTRODUCTION
SMART BOX | 31 SMART BOX | 32
SMART BOX | 33 SMART BOX | 34
CENTRAL CONTROL
FUNCTION
Don’t bother to stand up to control the lights and curtains, an iPad or a smart phone is
all you need to replace several remotes and power switches. For example:
On a weekend morning, you throw yourself into the sofa. What are you planning to do?
Close the blinds? Make a cup of coffee? Or turn on the wall lamps?
Now you don’t need to seek for your remotes everywhere any more. Take your iPad or
smart phone, open Smart Home System and find the device you want easily. Control the
appliance in your home in any manner you want and make your life easier.
SMART BOX | 35 SMART BOX | 36
CENTRAL CONTROL
FUNCTION
Roller Blinds
·
Click the curtain icon enter home page-room to control the open-close state
of the roller blinds (percentage-based control available depending on motor type).
·
Click “ ”, “ ” or “ ”button for "open”, “close” or
“stop” operation.
Motorized curtains
· Press and drag the curtain slowly leftwards or rightwards to control the
open-close state of the curtain (percentage-based control available
depending on motor type)
·
Click “ ”, “ ” or “ ”button for "open”, “close”
or “stop” operation.
SMART BOX | 37 SMART BOX | 38
CENTRAL CONTROL
FUNCTION
Venetian Blinds
· Click device icon to control the open-close state of the venetian blinds
(percentage-based control available depending on motor type);
· Click “ ”, “ ” or “ ” button for "open”, “close”
or “stop” operation.
· Angle adjustment: Slid “ ” to adjust the angle of the venetian blinds.
Window Opener
· Click device icon to control the open-close state of the window opener
(percentage-based control available depending on motor type);
· Click “ ”, “ ” or “ ”button for "open”, “close”
or “stop” operation.
Can control on/off device including table lamp, coffee
maker, electric cooker, heater etc.
Smart Socket
SMART BOX | 39 SMART BOX | 40
Light
Click “ ” to turn on/off the lights. Drag the slider at the bottom of
the device icon to dim on percentage basis. When the lighting is 0%, the
light is off. When the intensity is 100%, the light is the brightest (Dimming
function is only available with dimming module installed).
CENTRAL CONTROL
FUNCTION
SCENE CONTROL
FUNCTION
With the help of the easy “One-button” scene switch, you’ll get rid of the embarrassment of rushing around to control different devices such as lights, motorized blinds and
curtains, AC and AV devices in different areas. For example, after you wake up in the
morning, you just need to press the scene switch for “Wake-up Mode”, Smart Home
System will automatically open the shade curtains and window opener of the bedroom,
turn off the AC system of the bedroom and turn on the light and exhaust fan of the
bathroom. Five places to go after wakeup are simplified to be one button to touch,
making your life much easier.
SMART BOX | 41 SMART BOX | 42
SMART BOX | 43 SMART BOX | 44
· Press setting button “ ”on the home page; click “ ” to enter
scene set interface.
· Click edit button “ ” and then click add button " ” to enter
“Add Scene” Interface.
· Click “ " and select picture for name the scene.
· Click save button“ ” to enter “edit scene” interface.
New Scene Creating
AddEdit
Save
SCENE CONTROL
FUNCTION
Click Add button“ ” to enter “Add Device” interface.
· Find the device to be added in the corresponding room;
· Click “device” icon to enter “Device State Setting” interface.
Add
SMART BOX | 45 SMART BOX | 46
Scene Control
· Select “ ” on the home page; click to enter the“Scene Set”
Click Launch button “ ” to execute the scene.
· Scene editing is made under the scene configuration of the Setting
Menu on the home page.
Launch
SCENE CONTROL
FUNCTION
· Choose a state to be the executed state in the scene,set the state of
the device as the state for example, click “open”, then the device is
opened when the scene is activated.
· Click “ ” and the scene is successfully added.
OK
SMART BOX | 47 SMART BOX | 48
SCENE CONTROL
FUNCTION
Scene Deletion
· Click " ” button on the home page; click “ " to enter “Scene Set”
interface.
· Click the scene .
· Click “ ” to remove the added device from the scene.
· Remove all devices in the scene and then click OK button“ " to
enter “Scene set” interface.
· Click edit button “ ” .
· Click “ ”and“ ”to remove the scene; then click back button
“ " to successfully complete the deletion.
Edit
Back
OK
TIMER CONTROL
FUNCTION
For people living a nine-to-five lifestyle like you, a more regular life is demanded. The
Timer Control Function of Smart Home System can handle many trivial things for you, for
example, timed wakeup, timed congee cooking, timed opening of AC, timed opening of
floor heating, etc. For example, on the weekdays from Monday to Friday, at 5 a.m., Smart
Home System will automatically connect the power supply of the electric cooker and cook
the rice and water you prepared last night to delicious congee. At 7 a.m., the background
music of the automatic control function plays, the soft music wakes you up from the
sweet dream, the motorized blinds open gently; the lights and exhaust fan in the
bathroom open; the lights in the coatroom turn on; after you get yourself washed, the
congee is ready in perfect temperature. After enjoying your breakfast, you leave home at
8 a.m., and the Smart Home System automatically turns off the power supply for all lights
and electrical appliances except the AC. At 5:50 p.m., by timer control, the AC/Floor
Heating system in the home is turned on. When you get home at 6 p.m., appropriate room
temperature is already there in your home. It is Smart Home System that saves both your
trouble and energy.
SMART BOX | 49 SMART BOX | 50
SMART BOX | 51 SMART BOX | 52
TIMER CONTROL
FUNCTION
New Timer Editing
· Click edit button “ ” to enter “Timer” interface.
· Click add button “ ” to enter “Add Timer” interface.
· Click “ ”to edit the name,then click “ ”;
· Click“ " to edit the time,click “OK”and return to“Add Timer”
interface.
Add
OK
Edit
· Click “ ” icon on the home page .
Click “ ” to enter " Repet ” interface; select repetition time within the
scope from Monday to Sunday (Single choice or multiple choice) ; click
“OK” button “ ” to save the current settings; click cancel “ ”
to abandon current settings. If no repetition cycle is selection, the timer will
be valid only for the current day.
OK Back
SMART BOX | 53 SMART BOX | 54
TIMER CONTROL
FUNCTION
·
Click “ ” to enter “choose scene” interface; click the scene to be
executed; then click “OK” button “ ”.
·
After all the setting operations are done, click save button “ " save
current setting and return the "Timer Editing" interface.
·
Click Back button “ ”, and the timer adding is successful.
·
Click “ ” to turn on/off the timer. The state of “ ” indicates
that the timer is on.
Save
OK
Back
Timer Control Function
· Click “ ” icon on the home page to enter "Timer " interface.
· Note: Please ensure that the timer of the Smart Box is correct. Please
refer to P22 for viewing of Smart Box time.
SMART BOX | 55 SMART BOX | 56
TIMER CONTROL
FUNCTION
Timer Control Function
Click “ ” to turn on/off the timer; click edit button “ ” to
edit the timer.
Edit
REMOTE CONTROL
FUNCTION
For people with larger social circles like you, you would forget to turn off the household
appliances when you’re engaged in social activities. Or, when you get home after work,
the room is sweltering. You would be sweating all over before the AC cools the room to
an appropriate temperature. Smart Home System may enable you to control the
household appliances in your home even if you’re out. For example, what if it suddenly
pops into your mind that you forgot to turn off one electrical appliance when you’re
already out? Just connect the Internet with iPad or mobile phone and enter Smart Home
System, then disconnect all power supplies except the power for refrigerator. On a hot
summer day, after inviting some friends to get together in your home, you may turn on
the AC system in your home by iPad or mobile phone 20 minutes in advance. When
you’re home, there’s already cool temperature indoors. Just leaving your friends
astonished, you’re the one to enjoy the comfortable life and lead a distinguished life
style and life quality.
SMART BOX | 57 SMART BOX | 58
SMART BOX | 59 SMART BOX | 60
· Upon the completion of system installation, after the first successful
local login, the ID field of the device will automatically generate 12 digits,
which is the Device ID (Unless deleted by the user, the Device ID will be
saved in the “Device ID” field after being generated automatically).
· Log in directly in case of remote login.
· When remote login of other hosts is needed, login can be conducted
after inputting "device ID" of host which shall be provided with remote login
Note: Router connected with the Smart Box must be accessible via
Extranet and the mobile phone or iPad must also be accessible to the
Extranet.
REMOTE CONTROL
FUNCTION
FAVORITES
FUNCTION
If there're a great number of devices in your home or many scenes have been added, and
some of the devices or scenes are most frequently used by you, you may add them into
your Favorites to quickly call such operations. For example, if you’re used to viewing
news on the phone before sleeping, you may add “Sleep Mode” to the Favorites. Then
you may directly click “Sleep Mode” when you’re about to rest, which is quick and
convenient.
SMART BOX | 61 SMART BOX | 62
SMART BOX | 63 SMART BOX | 64
FAVORITES
FUNCTION
· Scenes and devices are items that may be added into the Favorites
· Find the device to be added into the Favorites in the room; click
“ ” and the icon turns to “ ”, indicating successful addition.
· Select the “ ” icon on the home page; click to enter the “Favor-
ites ”interface.
Favorites
·On the“Favorites”interface, the devices and scenes added into the
Favorites may be operated or cancelled.
·Remove favorite: Enter the “Favorites”interface and click the edit
button “ ".
·Click “ ” to remove the added scene or device from the Favorites.
·Click return button “ ” after the removal.
Favorites
Edit
Back
COMMON PROBLEM
RESOLUTION
SMART BOX | 65 SMART BOX | 66
1) Check if the wifi is able to be accessed(if the ID box is
connected to the Lan port of the wifi router）；
2) Verify the IP and port No；
3) Check if the 3rd.light on the ID box is on,if not,reconnect
network cable to ensure the availablility of the internet.
How to confirm the
failure of ID box?
First,check if the power indicator is on,if not,check the power
adapter is well placed.In the meantime,check the working indicator
and wifi indicator,which are normal to be off when standby,but
flick when operated.
How to do aginst the
frequent dropping after log in?
The network must have restrained the access of the ID
box,you shall reset the network for the permission of the
access.
After the scene is created,
some delive mis-operated
during execution？
Enter the scene set interface to check if the preset status of
execution is correct.
The timer is not activated
on time？
Check if the physical time of the ID box is correct.
The system is not able to be
remote log-in？
1) Check if the input of the device ID is correct
2) Check if the phone or ipad is successfully linked to the internet.
What can I do about the
log-in failure,or when the
APP disply "Network
failure,reconnecting"?
Reserved the rights for the final interpretation of the products.
SMART BOX | 67 SMART BOX | 68
NOTE
Regarding installation: Pls do not proceed on installation before
you read the instruction thoroughly.
About maintainess: The box shall be set in place dry and clean,to avoid damage on the electronic
components.Do not clean the box with chemical detergent.
About storage:The cartons shall be stored in place with good ventilation,dry and clean.
The stacks shall not exceeds 10 layers.Keep the temp. within -10-40 degrees.
About transportation：The carton can be transported by varied transportation,in the case to be
protected from rain,snow and heavy crash.
About after service:Users are not allowed to diassemble the item against failure.It shall be delivered
to the maintain erea or repaied under the service team's instruction.
Reserved the rights for the final interpretation of the products.
Loading...