Island Bay HSHS10-Bronze, HSHS10-Pewter, HSHS10-GC, HSHS10-TC, HSHS10-3 Assembly Instructions Manual
...
1
ITEM NAME: 15ft Hammock Stand for Spreader Bar
Hammocks
SKU: HSHS10-Bronze, HSHS10-Pewter, HSHS10-GC,
HSHS10-TC, HSHS10-3, HSHS10-4
End Plugs are pre-installed on foot
brackets and arm poles.
CONTENTS OF PACKAGE:
2pcs of upright arm poles (a) 2pcs of foot brackets (c)
1pc of base pole (b) 2pcs of S-hooks (d)
ASSEMBLY INSTRUCTIONS
2
PRE-ASSEMBLY PREPARATION:
STEP-BY-STEP ASSEMBLY:
!
DO NOT LET CHILDREN PLAY IN OR AROUND THE UNIT DUE TO THE POSSIBLE RISK OF FINGER ENTRAPMENT
• Please read through this instruction before beginning assembly.
• Two-adult assembly is recommended.
• Clear out the space for assembly and lay out all parts based on Parts List, extra room will allow
you to easily determine if all the pieces are present.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller
parts or hardware.
• Keep small parts and pieces away from children until fully assembled.
• Please check for any loose screws and tighten them before you use.
STEP 1: Place base pole (b) between the two foot brackets (c), and insert foot brackets into the
pole. Check to make sure the pre-installed spring clips have snapped in securely to the hole on the
base pole.
STEP 2: Take one arm pole (a) and hold it with the plugged end facing up.
STEP 3: Slide it over one of the foot bracket ends facing up. Make sure the pre-installed spring clip
has snapped in securely to the hole on the arm.
STEP 4: Repeat for the other arm pole. You may want to grasp the end of each pole and shake
gently to insure all connections are secure. CAUTION: All foot brackets must be completely
inserted into the poles to ensure safety and proper stand measurements.
STEP 5: Next insert the S-hooks that are included, into the holes at the top of each arm pole. This
is done by inserting the hook perpendicular to the pole and turning it to align with the pole. Now you
are ready to attach your hammock to the stand.
This product is assembled with a cam lock set
Loading...