ISDT D2 Smart Charger Operating Instructions Manual

D2 Smart Charger

Operating Instructions

Ver 1.1.1706

Introduction

D2, a built in PSU AC-DC dual smart charger, designed by ISDT

Please visit : www.isdt.co for more details on the functions of this smart charger,

as well as purchase various accessories.

Functions of products will be kept on upgrading, the manual in your hand may

be different from the actual operation; please refer to the actual functions.

This user guide update date is June 20, 2017.

Revolution Starts Here

Innovative reform, Friendly to use

Contents

Warnings and Safety Tips

Product Parameters and Characteristics

Default Battery Type of Charger and Task Parameters

How to Confirm Charging Current

Task Setting

Operative Skills

Working Parameters Display

System Default

Troubleshoot

04

05

07

08

09

13

14

16

17

Warnings and Safety Tips

The following safety tips are essentially important. Please strictly follow the manual’s
instructions in operation to guarantee safety. Improper operation or incorrect working
parameter settings may cause damages to the charger and battery and/or result to a fire.

Do not use the charger in an unattended manner; in case of any functional abnormi­ty, please stop using it and refer to the manual.

Keep the charger away from dust, humidity, rain and high temperature, as well as
avoid direct exposure to the sun and intense vibration.

Make sure input voltage for D2 is AC 100-240V.

Please place the charger on a heat-resisting, non-flammable and insulating
surface. Do not use it by placing it on the car’s seats, carpet or other similar places.
Keep inflammable and explosive objects away from operation areas of the charger.

Make sure the heat emission hole at the bottom of the charger is uncovered while
in use, and ensure the cooling fan smoothly extracts heat.

Please fully understand the charging and discharging characteristics as well as the
battery’s specifications. Additionally, set up proper charging parameters in the
charger. Incorrect setting of parameters can cause damage to the charger and
battery and/or result to disastrous consequences such as fire or explosion.

When charging or discharging is completed, please press the speed shuttle key to
terminate current task, and remove the battery when the charger shows the standby
screen.

04

Product Parameters and Characteristics

Thank you for purchasing the ISDT D2 Charger.
This Manual will guide you how to use D2 and its important functions.
You can know more about relevant information of IDST products by following this
link: www.isdt.co

1

10

9

8

5

2

3

4

11

6 7

05

1. AC input

2. USB port

3. Update port

4. Balance port for channel 1

5. Battery port for channel 1

6. Battery port for channel 2

7. Balance port for channel 2

8. Channel 1 select button

9. Channel 2 select button

10.

2.4”IPS display

11.

Speed shuttle key

Product Parameters and Characteristics

120MM

Specifications:

Input Voltage:

Charge Current:

Discharge Current:

108MM

AC 100 -240V

0.1 -1 2.0 A * 2

0.1 - 3 .0A * 2

Suppor ted Batt. Type:

70MM

47MM

LiFe/Lilon/LiPo/LiHv (1-6S)

NiMH/Cd(1-16S)

Pb(1-12S)

Max Charge Power:

Max Discharge Power:

Balance Current:

Balance Cells:

06

200W

5W *2

1A/c ell *2

1-6S * 2

Display:

Operating Temperature:

Storage Temperature:

Dimensions:

Weight:

2.4�320x 240 IPS LCD

0-40°C

-20-60°C

120x108x70 mm

510g