ISCommunications u-vision Quick Manual

U-Vision Quick and Driver Manual

Index

1. Accessory of U-Vision

2. Connecting U-Vision to PC

3. Pen Action

4. Driver Installation

5. Configuration

6. U-Vision Pull up Manu

7. Trouble Shooting

8. Caution For U-Vision

1. Accessories of U-Vision

U-Vision is Interactive Whiteboard Projector. To use the U-Vision correctly, please find necessary
accessories and follow the instructions in this manual.

In the projector box, you will find the following accessories.

Caution : When inserting battery into the IR Pen, make sure the battery polarity is

correct.

2. Connecting U-Vision to PC

Use the USB cable to connect U-Vision to PC. Plug the USB mini-B end into U-Vision and plug USB
type –A end into PC.

In the Package, a 5m USB cable is provided. If more than 5 meter USB cable length is required, then
use repeater cable to extend the USB cable length.

3. Pen Action

IR Pen provides four actions, Click, Double Click, Right Button Click and Drag.

Click : Touch an icon or a menu on the screen.
Double Click : Touch an icon or a menu on the screen two times.
Right Button Click : Touch an icon or menu 1.5 seconds or more.
Drag : Touch and drag an object on the screen

4. Driver Installation

Insert the U-Vision CD into your CD/DVD-ROM driver. The Installation assistant will run
automatically. Follow the instructions in the installation assistant. If the assistant does not run
automatically, double click the “setup.exe” under CD/DVD-ROM directory and the Installation
assistant will run.

4-1 Click Install U-Vision in the installation assistant.

U-Vision 드라이버 CD 넣었을 때, 바로 나오는 이미지 삽입 필요

4-2. Select a language and click “OK”.

4-3. The installation dialog box will appear. Click next. During installation, it is recommended to
close other applications.

4-4 Click Install, installation begins.

4-5 Installation ends, then dialog box will indicate finish. Click “Finish”.

When Installation is finished,

 U-Vision icon will be created on the desktop.
 Installation folder will be created on C: directory.

Upon starting U-Vision, the configuration window will appear on the desktop to assist in setting
up the U-Vision configuration

5. Configuration

5-1. U-Vision Configuration

To use the U-Vision, the proper setting of the U-Vision configuration is needed. The
Configuration setting window will help you set-up the U-Vision correctly.

○

1

○3

○2 ○4

○

1

U-Vision Model : Select “Ultra Short Throw Model”. If the incorrect model is selected, accuracy

will drop.

○

2

U-Vision Language : U-Vision language is selected automatically and is the same as the

Operating System Language. If you want to change language to another language, click

and then language list will be exposed.

○

3

U-Vision Option :

Start Program Registration : Mark if you want to run U-Vision when the PC starts.
Mount U-Vision on ceiling : Mark if you mount the Projector on the ceiling. When Projector is

placed on the table top, do not mark this item.

Installing Rear Screen : If the Projector is installed on a rear screen system, then mark this item.

○

4

Select Update Sever : New version of U-Vision is serviced from an update server. In some regions,

www.iscom.co.kr is not available, simply choose the available server from the list.

5-2. U-Vision Alignment View

U-Vision Alignment function is to set the orientation of U-Vision to the screen.

Alignment View : When clicking on the “Alignment View”, the screen image is displayed
on the alignment view box (central black box).

If the screen image is not in the center, the calibration will fail. Please make sure the
PointWrite module is attached to the projector properly.

5-3 U-Vision Calibration

U-Vision provides two kinds of calibration methods, Auto Calibration and Manual Calibration.

Auto Calibration : click , the calibration process will run automatically.
In rare circumstance, auto calibration may fail or accuracy may be low. In this case, please execute the
manual calibration.

Manual Calibration :

Click , and the calibration window will be projected to the screen.

Touch the IR Pen on the calibration cursor quickly, the next cursor location will appear.

The user will touch 16 points thus completing the calibration process.

Depending on circumstances, Auto Calibration may fail or accuracy may not be adequate. In
this case, please calibrate manually.

6. U-Vision Pull-up Menu

After you run the U-Vision by double clicking U-Vision icon on the desktop, U-Vision
icon will be shown in the system tray.

Right button click U-Vision icon in windows menu bar, then pull up menu appears.

○1
○2
○3
○4
○5
○6
○7

○

1

Configuration : Only when you want to change mounting position of Projector, to change language,

click this menu and follow the step “5. Configuration”

○

2

Alignment View : Same as “ Alignment View” function of Configuration

○

3

Auto Calibration : If the accuracy is not enough during when you use U-Vision, do “Auto

Calibration” again.

○

4

Manual Calibration : If the accuracy is not acceptable or Auto Calibration fails, select “Manual

Calibration”

○

5

Virtual Keyboard : If keyboard input is needed, click on the “Virtual Keyboard” then the keyboard

will appear on the screen.

○

6

Run i-Pro : When you want to run “i-Pro”, then click

○

7

About U-Vision : This menu provides U-Vision version information. Click this menu, and then

version information window will be appeared.

7. Trouble shooting

At the ISCommunications’s homepage, usage tips and trouble shooting methods are provided. Please
visit our homepage at http://eng.iscom.co.kr/

8. Caution for U-Vision

In case U-Vision mount on table, the distance between screen and U-Vision should be over 1meter.
If it is mounted on the table within 1 meter from screen, interactive function would have malfunction
due to light interference.
Thus, we highly recommend users to mount U-Vision on ceiling, which does not affect interactive
function regardless the distance.