Page 1
QUI CK START M ANUAL
Q
S
SAFE TY INS TRUCT IONS
IS910.1
Page 2
KEYS AND SPECIAL FE ATURES
2
1
18
17
3
4
16
13
15
Docume nt No. 1016MM01REV01
Version: 2018- 01-18
(c) 2017 i.safe MOBI LE GmbH
i.safe M OBILE GmbH
i_Par k Tauberf ranken 10
97922 Lauda- Koenigshofen,
Germany
Tel. +49 9343/60148- 0
info@isaf e-mobile.com
www.isafe -mobile.com
8
9101112
Template: TEMPM M01REV10
5
6
7
14
Page 3
ENGLISH
INTRODUCTION
This docu ment contains informat ion and safety re gulations which are to be o bserved
without fail fo r safe operatio n of the device IS910.1 under the de scribed condition s.
Non- observance of this inf ormation and inst ructions can have seriou s consequences
and/or may vi olate regulations.
Please rea d the manual and these s afety instruc tions before usi ng the device.
In case of con tradicting infor mation, the tex t of these safet y instructions s hall apply.
In case of any dou bt, the G
can be found at www.isafe -mobile. com or requeste d from i.safe M OBILE GmbH .
erman ver sion shall apply.
RESERVATION
The conten t of this document is pres ented as it current ly exists. i. safe MOBILE G mbH
does not pr ovide any explici t or tacit guarante e for the accuracy o r completeness of
the content o f this document, incl uding, but not restr icted to, the tacit g uarantee
decisio ns make liability man datory. i.saf e MOBILE GmbH r eserves the rig ht to make
changes to thi s document or to with draw it any time without p rior notice. Changes ,
errors an d misprints may not b e used as a basis for any claim fo r damages. All rights
reser ved.
i.safe MO BILE GmbH canno t be held responsi ble for any data or oth er loss and direct
or indirec t damages caused by any im proper use of this dev ice.
The devi ce IS910.1
(zone
scheme.
1/21 and 2/22
) in accordance w ith directives 2014/34/EU, as we ll as the IECEx
ATEX:
2G Ex ib IIC T4 Gb
2D Ex ib IIIC T135°C Db IP6X
EPS 16 ATEX 1 145 X
CE-designation: 2004
IECEx:
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db IP6X
The EU- declaration of co nformity can b e found at the end of this man ual.
4
Temperature range:
-20°C … +60°C
Manufactu red by:
i.safe MOBILE Gmb H
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany
,
Page 4
FAULTS AND DAMAGES
If there is any r eason to suspect t hat the safety of t he device has been co mpromised, it
must be wi thdrawn from use an d removed from any ex-h azardous areas immed iately.
Measures m ust be taken to preve nt any accidental res tarting of the de vice.
The safe ty of the device may b e compromised, if f or example:
Malfunctions occur.
The housing of the device shows damage.
The device has been subjecte d to excessive loads.
The device has been stored improp erly.
Markings or labels on the device are illegible.
We recomme nd that a device display ing errors or in wh ich an error is suspec ted be
sent back to i.safe MOBILE G mbH to be checked .
Use of this devi ce assumes that the op erator observe s the conventional safe ty
The foll owing safety re gulations must also b e complied with:
Inside ex-hazardous areas the covers of all inter faces must be closed.
To ensure the IP-protection, it has to be ensured that the all gaskets are present and
functional. IP protec tion is not guaranteed anymore if gaps are visible.
The device may only be charged outsid e ex-hazardous areas using the i.safe
PROTECTOR 2.0 or i.safe PROTE CTOR 3.0 USB-cable or other equipment approved
by i.safe MOBILE GmbH .
Physical connections to other equipme nt are only allowed outside ex- hazardous
areas using the i.safe PROTECTOR 2.0 or i. safe PROTECTOR 3.0 USB-cable or other
equipment approved by i.safe MOBI LE GmbH.
The device may be charged only at ambient temperatur es in between +5°C ... +35°C.
The device must not be expose d to abrasive acids or bases.
The device must not be taken into zones 0 or 20.
Only accessories approved by i.safe MOBI LE GmbH may be used.
In case the device has a hand strap, it is not allowed to do the adjustment of the hand
strap in ex-hazardous areas.
FURTHER SAFETY ADVISES
Do not touch the screen of the device with sharp objec ts. Dust particles and nails may
scratch the screen. Please maintain the screen clean . Remove dust on the screen with
a soft cloth gently, and do not scratch the screen.
Do not put the device in environments with excessive temp eratures, as this could lead
Charge the device under dry indoor conditions on ly.
Do not charge the device in environments with much dust or humidit y.
EN 5
Page 5
The device may be charged only at ambient temperatur es in between +5°C ... +35°C.
Do not use the device in areas where regulations or legislatives pro hibit the use.
from induction ovens or micro -waves.
Do not attempt to open or repair the device. Impro per repair or opening can lead to
to repair the device.
Only use accessories approved by i.safe MOB ILE GmbH.
pacemakers, so always keep a distance of at least 15 cm between the dev ice and these
devices.
Observe all corresponding laws that are in force in the respec tive countries regarding
the use of devices while operating a vehic le.
device.
Do not use any chemical cleaning agents to clean the devi ce or the charger. Use a
damp and anti-static soft cloth for cleaning.
Do not discard old and abandoned lithium batteri es into the trash, send them to
designated waste disposal loc ations.
The user alone is responsible for any and all damages and liabilitie s caused by mal-
ware downloaded when using the network or other dat a-exchange functions of the
device. i.safe MOBI LE GmbH cannot be held responsible for any of those claims.
WARN ING
i.safe MO BILE GmbH wil l not assume any liabilit y for damages caused b y disregar-
ding any of thes e advices or by any inappropr iate use of the device .
MAINTENANCE/REPAIR
Please not e any legal requireme nts for periodic insp ection.
The devi ce itself has no user-s erviceable p arts. It is recom mended to perfor m
inspec tions according to the s afety regulatio ns and advises. If ther e is a problem
with the de vice, please conta ct your vendor or consult t he service cente r. If your
device is in n eed of repair, you can either co ntact the ser vice center or your vendor.
BATTERY
The devi ce may only be charged at am bient temperature s in a range from
+5°C ... +35°C.
INSTALLATION OF THE MICRO SIM CARD
The devi ce features a micro SIM card sl ot. The slot is accessib le on the top of the
device (see p age 2).
6
Page 6
WARN ING
remove the SIM cards when any external power supply is conne cted, otherw ise the
SIM card may b e damaged.
INSTALLATION OF THE microSD CARD
The device featur es a microSD card slot (up to 32GB). The slot for the microSD c ard
is on the top of the devi ce (see page 2). If you want to remove the microSD card, p lease
make sure that the card is n ot in use by the device. To remove the microSD card foll ow
the instruc tions given in <Settings> <Storage>.
WARN ING
Do not tr y to insert or remove th e microSD card when any ext ernal power supply is
connec ted, otherwis e the microSD card may be dam aged.
KEYS AND SPECIAL FEATURES
(see illus tration on page 2)
1 SO S KEY: Long press automatically selects an emergency number stored by you.
This function can only be used in conjunction with an optionally available LWP app.
2 SD CARD SL OT: Use for microSD card.
3
SI M CARD S LOT: Use for SIM car d.
CA MERA : Front camera.
4
5
VO LUME UP K EY: Volume up.
EN 7
Page 7
6 VO LUME DO WN KEY: Volume down.
7 CO NTROL LED:
8 PO WER KE Y: Long press to power ON/O FF the device. Short pre ss to power
ON/OFF the s tandby mode.
9 FUNC TION KEY M1:
10 FUNC TION KEY M 2:
11 BAC K KEY: Return to previou s screen.
12
HOME KEY: Return to Homescreen.
13 CU RRENT APPLI CATION : Close all appli cations.
14 US B OTG: Conne ct external USB dev ices.
15 EA RPHONE JA CK: Connect a n earphone.
16 MA GNETI C CHARG ER POR T: To charge the dev ice with the deliver ed
magnetic i. safe PROTECTO R 3.0 USB cable.
17 DO CKING STATION: Co nnect to exte rnal docking stati on.
18 MI CRO USB T YP C: To charge and to c onnect the devi ce with the delivere d
i.safe PRO TECTOR 2.0 USB c able.
SET TING PASSWORD
In settings a passwort is require d, use standard password “1234”.
IMPORTANT INFORMATION!
FACTORY RESET/ACTIVATE OEM MODE
If you have set up a G oogle™ Account, it is impo rtant to proceed wit h the following
steps be fore you make a facto ry reset. This ensur es that all private da ta will be delete d
on the devi ce:
<Settings>
developer mode)
unlocking> activate <Allow> back to <Settings> <Backup & reset>
<Factory data reset>
If you do not e nable the OEM unlocki ng, the device will as k you to sign in with the
previou sly synced Google Ac count after the res tart. In that cas e the device is unusab le
for other u ser.
RECYCLING
The crossed-o ut wheeled-bin symbol on your product, batte ry, literature, or packaging
reminds you that all electrical and elec tronic products, batteries, and accumulator s
must be taken to separate collecti on at the end of their working life. This requirement
applies in the European Union. Do not dispose of thes e products as unsorted municipal
waste. Always return your used elec tronic products, batteries, and packagin g materials
<About tablet> tip seven times on <Build number> (to activate the
back to <Settings> <Developer options> enable <OEM
<Reset tablet > <Erase everything>
8
Page 8
to dedicated collection p oints. This way you help prevent uncontrolled waste disposal
and promote the recycling of materials . More detailed information is available from the
product retailer, local waste author ities, national producer responsibility organisations,
or your local i.safe MOBILE Gm bH representative.
CERTIFICATION INFORMATION
Maximum SAR for this model and conditions under which it was recorde d:
SAR (body - worn) 1.12W/kg
FCC CAUTION
Any Changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SPECIFIC ABSORPTION RATE SAR INFORMATION
SAR tests are conducted using standard operating positions accepted by the FCC with the
tablet transmitting at its highest certied power level in all tested frequency bands,
although the SAR is determined at the highest certied power level, the actual SAR level of
the tablet while operating can be well below the maximum value. Before a new model
tablet is a available for sale to the public, it must be tested and certied to the FCC that it
does not exceed the exposure limit established by the FCC, tests for each tablet are
performed in positions and locations as required by the FCC.
For body worn operation, this model tablet has been tested and meets the FCC RF
exposure guidelines
DE 9
Page 9
ISEDC WARNING
This device complies with ISEDC RSS standard(s). Operation is subject to
the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
SAR tests are conducted using standard operating positions accepted by the ISEDC with
the tablet transmitting at its highest certied power level in all tested frequency bands,
although the SAR is determined at the highest certied power level, the actual SAR level
of the tablet while operating can be well below the maximum value. Before a new
model tablet is a available for sale to the public, it must be tested and certied to the
ISEDC that it does not exceed the exposure limit established by the ISEDC, tests for each
tablet are performed in positions and locations as required by the ISEDC.
For body worn operation, this model tablet has been tested and meets the ISEDC RF
exposure guidelines
Le présent appareil est conforme
Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites
d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et
la conformité and compliance d’acquérir les informations correspondantes
TRADEMARKS
i.safe MOBILE and the i.safe MOBILE logo are registered trademarks
of the i.safe MOBILE Gm bH.
Google is a trademark of Google LLC.
All other trademarks and copyright s are the properties of the ir respective owners.
10
Loading...