i safe MOBILE INNOVATION2X Users Manual

INNOVATION 2.
X
Quick Start Manual
and
Safety Instructions
Schnellstartanleitung
und
Sicherheitshinweise
Document No. 1008DI02REV01 Version: 2013-11-04
Reservation: Technical Data is subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. All rights reserved. i.safe MOBILE GmbH cannot be held responsible for any data or other loss and direct or indirect damages caused by any improper use of this phone.
Vorbehalt: Technische nderungen behalten wir uns vor. nderungen, ä ä Irrt mer und Druckfehler begr nden keinen Anspruch auf Schadensersatzü ü . Alle Rechte vorbehalten. F r ü Datenverluste oder andere Sch den ä gleich welcher Art, die durch den unsachgem en Gebraäß uch des Telefons entstanden sind, bernimmtü i.safe MOBILE GmbH keine Haftung.
(c) 2013 i.safe MOBILE GmbH
i.safe MOBILE GmbH i_PARK TAUBERFRANKEN 14 97922 Lauda-Koenigshofen Germany
Tel. +49 9343/60148-0 info@isafe-mobile.com
die
www.isafe-mobile.com
Template: TEMPMD01REV00
Note / Hinweis
This document contains a quick start guide and the safety instructions necessary for the safe use of the smartphone INNOVATION 2.0 in ex­plosive atmospheres. The first part details the English instructions, the second part the German translation. More detailed instructions on the use of the phone can be found at www.isafe-MOBILE.com or directly at i.safe MOBILE GmbH.
Dieses Dokument enth lt die notwendigen Sicherheitshinweise f r die ä ü sichere Verwendung des Smartphones INNOVATION 2.0 in explosions­f higen Bereichen. Der erste Teil enth lt die englischen Anweisungen, ä ä der zweite Teil die deutsche bersetzuü ng. Detailliertere Informationen erhalten sie unter www.isafe-MOBILE.com oder direkt bei der i.safe MOBILE GmbH.
3
Contents
1 Introduction
2 Ex-Specifications
3 Faults and Damages
4 Ex-relevant Safety Regulations
5 Further Safety Advises
6 i.safe PROTECTOR
7 Keys
8 First Steps
8.1 Battery
8.2 Installation of the SIM Cards
8.3 Installation of the Micro-SD Card
8.4 First Use
8.5 Locking and Unlocking the phone
8.6 Using the Touchscreen
8.7 Connecting the phone with a computer
9 Display Layout
9.1 Status Bar
9.2 Quick Access Panel
9.3 Home Screen
10 Specifications
11 Troubleshooting
12 Maintenance
5
6
7
8
9
12
13
14
14
16
17
17
18
19
19
20
20
22
23
25
26
27
4
Safety Instructions
1 Introduction
This document contains information and safety regulations which are to be observed without fail for safe operation of the smartphone
INNOVATION 2.0 under the described conditions Non.-observance of
this information and instructions can have serious consequences and / or may violate regulations.
Please read the manual and these safety instructions before using the
. In case of
phone instructions shall apply. In case of any doubt, the German version shall apply.
The current EC declaration of conformity , EC and IECEx certificates of conformity, safety instructions and manual can be found at www.isafe­mobile.com, or requested from i.safe MOBILE GmbH.
Note
This document contains only the instructions necessary for setting up and safe use of your phone. A complete Quick Start Manual can be found in the root folder of the Micro­www.isafe-mobile.com. Please consult 8.7 to learn how to access the Micro-SD card from any computer.
contradicting information the text of these safety .
SD card
of the phone or at
5
Safety Instructions
2 Ex-Specifications
The INNOVATION 2.0 is a smartphone suitable for use in potentially explosive atmospheres (zones 1, 21, 2 and 22) in accordance with direc­tives 94/9/EC (ATEX 95) and 99/92/EC (ATEX 137), as well as the IECEx scheme.
Ex-markings
ATEX
IECEx: Ex ib IIC T4 Gb
Temperature range: -20 ... +60 C Manufactured by: i.safe MOBILE GmbH
II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135 C Db IP6X
EPS 13 ATEX 1 579 X
2004
Ex ib IIIC T135 C Db IP6X IECEx EPS 13.0025X
i_PARK TAUBERFRANKEN 14 97922 Lauda-Koenigshofen Germany
6
Safety Instructions
3 Faults and Damages
If there is any reason to suspect that the safety of the phone has been compromised, it must be withdrawn from use and removed from any ex-hazardous areas immediately. Measures must be taken to prevent any accidental restarting of the phone.
The safety of the phone may be compromised, if, for example:
malfunctions occur. the housing of the phone or the battery shows damage. the phone has been subjected to excessive loads. the phone has been stored improperly. markings or labels on the phone are illegible.
It is recommended that a phone which shows or which is suspected of faults and damages is returned i.safe MOBILE GmbH for inspection.
7
Safety Instructions
4 Ex-relevant Safety Regulations
Use of this phone assumes that the operator observes the conventional safety regulations and has read and understood manual, safety instruc­tions and certificate.
The following safety regulations must also be complied with:
Inside ex-hazardous areas the phone must be closed. The battery has to be fixed by the two screws and the cover of the USB interface has to be closed. The battery may only be exchanged or charged outside ex-hazardous areas. The phone may only be charged outside ex-hazardous areas using the i.safe PROTECTOR USB-cable or other equipment ap­proved by i.safe MOBILE GmbH. USB-connections to other equipment are only allowed outside ex­hazardous areas using the i.safe PROTECTOR USB-cable or other equipment approved by i.safe MOBILE GmbH. Use only the appropriate battery type BPI02A. It is not allowed to carry spare batteries into ex-hazardous areas. The phone may be charged only at temperatures in between 0 C ... 45 C. The phone must not be exposed to abrasive acids or bases. The phone must not be taken into zones 0 or 20. Only accessories approved by i.safe MOBILE GmbH may be used.
8
Safety Instructions
5 Further Safety Advises
Do not touch the screen of the phone with sharp objects. Dust parti­cles and nails may scratch the screen. Please maintain the screen clean. Remove dust on the screen with a soft cloth gently, and do not scratch the screen. Charge the phone under indoor conditions only. Please do not put the phone in environments with excessive temper­atures, as this could lead to heating of the battery, resulting in fire or explosion. Do not charge the phone near any flammable or explosive substanc­es. Do not charge the phone in environments with much dust, humidity, or excessively high or low temperatures (the permitted charging temperature range is 0 ... 45 C). Do not use the phone in areas where regulations or legislatives pro­hibit the use of a mobile phone. Do not expose the phone, battery or charger to strong magnetic fields, such as are emitted from induction ovens or micro-waves. Do not attempt to open or repair the phone. Improper repair or opening can lead to the destruction of the phone, fire or explosion. Only authorized personnel are allowed to repair the phone. Only use accessories approved by i.safe MOBILE GmbH. Please do not directly connect the poles of the battery, to avoid short-circuiting the battery. Power off the phone in hospitals or other places where the use of mobile phones is prohibited. This phone may affect proper work of medical equipment, such as pacemakers, so always keep a distance of at least 15 cm between the phone and these devices. Observe all corresponding laws that are in force in the respective countries regarding the use of mobile phones while operating a vehi­cle. Please power off the phone and disconnect the charging cable before cleaning the phone. Do not use any chemical cleaning agents to clean the phone or the charger. Use a damp and anti-static soft cloth for cleaning.
9
Safety Instructions
Do not discard old and abandoned lithium batteries into the trash, send them to designated waste disposal locations or return them to i.safe MOBILE GmbH. The user alone is responsible for any and all damages and liabilities caused by malware downloaded when using the network or other da­ta-exchange functions of the phone. i.safe MOBILE GmbH cannot be held responsible for any of those claims.
Warning
i.safe MOBILE GmbH will not assume any liability for damages caused by disregarding any of these advices or by any inappropriate use of the phone.
10
Introduction
Dear customer, thank you very much for choosing the INNOVATION 2.0 smartphone. This quick start manual gives you access to the basic func­tions of the phone.
With IP protection, rugged housing and a touchscreen, the INNOVATION 2.0 is the ultimate dual SIM ANDROID smartphone for zone 1, 2, 21, and 22 explosion hazardous areas.
To ensure the IP protection of the phone please make sure that the seals of the battery, the USB port cover and all the screw covers are in place correctly.
This document contains only the instructions necessary for setting up and safe use of your phone. A complete Quick Start Manual can be found in the root folder of the Micro-SD card of the phone or at www.isafe-mobile.com. Please consult 8.7 to learn how to access the Micro-SD card from any computer.
Please read the Quick Start Manual before using the phone and follow the tips and advices in order to be able to use the phone for your full satisfaction and safety.
11
Quick Start
6 i.safe PROTECTOR
The INNOVATION 2.0 contains specially designed safety circuits. Connecting the phone to non-ex-approved equipment like a computer can endanger the safety of the phone, as faults in the non-approved equipment could lead to a power surge into the phone large enough to destroy the safety circuits.
The i.safe PROTECTOR is a USB-cable for connecting the phone with non-ex-approved equipment. It contains additional safety circuits to protect the phone from possible faults in the non-ex-approved equip­ment.
For this reason, charging and USB-connections are only allowed using the i.safe PROTECTOR .
12
7 Keys
(1) Power: Lock the phone.
(2) Menu: Bring up a list of options. (3) Home: Returns to the Home Screen.
(4) Back: (5) Volume: Context-sensitive volume regulation. (6) SOS: (7) PTT:
Long press to power up or down the phone.
Long press to see a list of last accessed apps. Return to the previous screen.
Long press to activate the SOS-alert Activate the Push-to-Talk function
13
Quick Start
8 First Steps
8.1 Battery
The battery is inserted into the back of the phone. The battery is not fully charged when the phone is purchased, but it contains enough en­ergy to power on the phone. To obtain best battery performance and battery life, let the battery discharge completely before charging it completely for the first three charging cycles.
8.1.1 Installing and Extracting the Battery
When installing the battery, insert the teeth at the bottom of the bat­tery into the corresponding notches of the phone, then press the bat­tery down and secure it by turning the two screws with the delivered screw driver (TORX T8). Ensure that the battery is safely in place before powering on the phone. Turn the phone upside down, turn the screws and remove the battery. Insert the battery into the phone as indicated in the pictures below.
14
8.1.2 Charging the Battery
Connect the i.safe PROTECTOR USB-cable with the phone as indicated in the picture below:
Connect the plug with the socket of the Power Supply. After charging, remove the USB-cable from the charger.
8.1.3 Battery Use
In actual use, the standby time and talk time of the phone varies with the network status, working environment and usage.
When the power of the battery is lower than normal, the phone will prompt you to charge it. Please charge the battery; otherwise you may lose any files which are not saved. If you do not charge for a long time, the phone will be powered off au­tomatically.
Warning
The phone may only be charged at ambient temperatures in a range from 0 C…45 C. Please do not use charging equipment if the tempera­ture exceeds this range. Only use the i.safe PROTECTOR USB-cable to connect to a charger. Using any other cable may cause danger and will void the warranty.
15
Quick Start
8.2 Installation of the SIM Cards
The phone features two SIM card slots. If you have installed two SIM cards, you can choose your primary card in <Settings
agement>.
Warning
Do not try to insert or remove any of the SIM cards when any external power supply is connected, otherwise the SIM cards or the phone may be damaged.
16
> → <
SIM man-
8.3 Installation of the Micro-SD Card
Open the Micro-SD card holder, and insert the Micro-SD card into the slot, then close the Micro-SD card holder.
8.4 First Use
8.4.1 Powering On Your Phone
Press the [Power key] until the screen lights up. Depending on the security settings of your SIM card, the phone may ask you for your personal identification number (PIN) before starting up.
The first time you power on your phone, you may be prompted to as­sign a language, date and time zone and enter your personal infor­mation. You will also be asked to sign in or set up your Google account. You can do this later but please note that some of the functions of the phone like the Google Play Store depend on a Google account.
17
Loading...
+ 39 hidden pages