i.safe MOBILE Challenger 1.0 Quick Start Manual
CHALLENGER 1.0
Quick Start Manual
and
Safety Instructions
Schnellstartanleitung
und
Sicherheitshinweise
Template: TEMPMD01REV00
Document No. 1003MD03REV00
Version: 2011-11-10
Reservation: Technical Data is subject to change without notice. Changes, errors and misprints may not be used as a basis
for any claim for damages.
Dokument Nr. 1003MD03REV00
Version: 10.11.2011
Vorbehalt: Technische Änderungen behalten wir uns vor.
Änderungen, Irrtümer und Druckfehler begründen keinen
Anspruch auf Schadensersatz
(c) 2011 i.safe MOBILE GmbH
i.safe MOBILE GmbH
i_PARK TAUBERFRANKEN 14
97922 Lauda-Koenigshofen
Germany
Tel. +49 9343/60148-0
info@isafe-mobile.com
www.isafe-mobile.com
Note / Hinweis
3
This document contains a quick start guide and the safety
instructions necessary for the safe use of the mobile phone
CHALLENGER 1.0 in explosive atmospheres. The first part
details the English instructions, the second part the German
translation.
More detailed instructions on the use of the phone, can be
found at www.isafe-MOBILE.com or directly at i.safe MOBILE
GmbH
Dieses Dokument enthält die notwendigen Sicherheitshinweise für die sichere Verwendung des Mobiltelefons CHALLENGER 1.0 in explosionsfähigen Bereichen. Der erste Teil enthält
die englischen Anweisungen, der zweite Teil die deutsche
Übersetzung.
Detailliertere Informationen erhalten sie unter www.isafeMOBILE.com oder direkt bei der i.safe MOBILE GmbH.
Contents
4
1 Introduction 5
2 Specifications 5
3 Faults and Damages 6
4 Ex-relevant Safety Regulations 6
5 Further Safety Advises 7
6 First Steps 9
6.1 Battery 9
6.1.1 Installing and Extracting the Battery 10
6.1.2 Charging the Battery 11
6.1.3 Battery Use 11
6.2 Insertion of the SIM Card 12
6.3 Insertion of the Micro SD Card 13
7 Functions of the keys 14
8 Status Icons 15
9 Specifications 16
10 Safety settings 16
10.1 SIM Card Lock 16
10.2 Restore Factory Settings 16
11 Frequently asked questions 17
12 Maintenance 18
Safety Instructions
5
1 Introduction
This document contains information and safety regulations
which are to be observed without fail for safe operation of
the mobile phone CHALLENGER 1.0 under the described conditions. Non-observance of this information and instructions
can have serious consequences and / or may violate regulations.
Please read the manual and these safety instructions before
using the phone. In case of contradicting information, the text
of these safety instructions shall apply.
In case of any doubt, the German version shall apply.
The current EC conformity certificate, EC declaration of conformity, safety instructions and manual can be found at
www.isafe-mobile.com, or requested from i.safe MOBILE
GmbH.
2 Specifications
The CHALLENGER 1.0 is a mobile phone suitable for use in
potentially explosive atmospheres (zone 2) in accordance
with directive 94/9/EC (ATEX 95) and directive 99/92/EC
(ATEX 137).
Name: CHALLENGER 1.0
Ex-marking: II 3 G Ex ic IIC T4
EC certificate of conformity: EPS 11 ATEX 1 368 X
Temperature range: -20.. + 55°C
Manufactured by: i.safe MOBILE GmbH
i_PARK TAUBERFRANKEN 14
97922 Lauda-Koenigshofen
Germany
CE-designation: 2004
Safety Instructions
6
3 Faults and Damages
If there is any reason to suspect that the safety of the phone
has been compromised, it must be withdrawn from use and
removed from any ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarting
of the phone.
The safety of the phone may be compromised, if, for
example:
malfunctions occur.
the housing of the phone or the battery shows damage.
the phone has been subjected to excessive loads.
the phone has been stored improperly.
markings or labels on the phone are illegible.
It is recommended that a phone which shows or which is
suspected of faults and damages is returned to the manufacturer for inspection.
4 Ex-relevant Safety Regulations
Use of this phone assumes that the operator observes the
conventional safety regulations and has read and understood
manual, safety instructions and certificate.
The following safety regulations must also be complied with:
The housing of the phone must not be opened inside ex-
hazardous areas. This also relates to the battery compartment.
The battery may only be exchanged or charged outside ex-
hazardous areas.
Use only the appropriate battery type BPC01A.
It is not allowed to carry spare batteries into Ex-hazardous
areas.
Safety Instructions
7
The battery may only be charged outside the Ex-hazardous
area using the appropriate charger or other equipment approved by i.safe MOBILE GmbH.
The battery may be charged only at temperatures in be-
tween 0°C..40°C.
The phone must not be exposed to abrasive acids or bases.
The phone must not be taken into zones 0, 1, 20, 21 or 22.
Only accessories approved by i.safe MOBILE GmbH may be
used.
5 Further Safety Advises
Do not touch the screen of the mobile phone with sharp
objects. Dust particles and nails may scratch the screen.
Please maintain the screen clean. Remove dust on the
screen with a soft cloth gently, and do not scratch the
screen.
Charge the phone under indoor conditions only.
Please do not put the battery in high-temperature envi-
ronments (high temperature will lead to heat of the battery), or else it may result in fire or explosion.
Do not charge the mobile phone near any flammable or
explosive substances in order to avoid fire, explosion or
other dangers.
Do not charge the mobile phone in environments with
much dust, humidity, or excessively high or low temperatures (the permitted charging temperature range is
0..40°C).
Do not use the phone in areas where regulations or legisla-
tives prohibit the use of a mobile phone.
Do not expose the phone to strong magnetic fields, such as
are emitted from induction ovens or microwaves.
Do not attempt to open or repair the mobile phone. Im-
proper repair or opening can lead to the destruction of the
phone, fire or explosion. Only authorized personnel are allowed to repair the phone.
Safety Instructions
8
Only use batteries charger and accessories approved by
i.safe MOBILE.
Please do not directly connect the two poles of the battery,
to avoid a short-circuit of the battery.
Power off the phone in hospitals or other places where the
use of mobile phones is prohibited. This Mobile phone may
affect proper work of medical equipment, such as pacemakers, so always keep a distance of at least 15 cm between the mobile phone and these devices.
Observe all corresponding laws that are in force in the
respective countries regarding the use of mobile phones
while operating a vehicle.
Please power off the mobile phone and disconnect the
charging cable before cleaning the phone.
Do not use any chemical cleaning agents to clean the mo-
bile phone or the charger. Use a damp and anti-static soft
cloth for cleaning.
Do not discard old and abandoned lithium batteries into
the trash, send them to designated waste disposal locations or return them to the manufacturer of the phone.
The user alone is responsible for any and all damages and
liabilities caused by malware downloaded when using the
network functions of the phone. The manufacturer cannot
be held responsible for any of those claims.
Warning: The manufacturer will not assume any liability for
damages caused by disregarding any of these advices or by
any inappropriate use of the phone.
Quick Start
9
Introduction
Dear customer, thank you very much for choosing the
CHALLENGER 1.0 GSM digital mobile phone. This quick start
manual gives you access to the basic functions of the phone.
For a more detailed explanation of all the functions, please
refer to the user manual.
With IP protection and rugged housing, the CHALLENGER 1.0
still works where other devices are long gone. With the certified safety functions you are allowed to use it in ATEX zone 2
explosion hazardous areas.
Please read this Quick start manual before using the phone
and follow the tips and advices in order to be able to use the
mobile phone for your full satisfaction and safety.
6 First Steps
6.1 Battery
The battery is attached to the back of the mobile phone. The
battery is not fully charged when the mobile phone is purchased, but it contains enough energy to power on the
phone. To obtain best battery performance and battery life,
let the battery discharge completely before charging it completely for the first three charging cycles.
Quick Start
10
6.1.1 Installing and Extracting the Battery
Turn the mobile phone upside down, turn the screws and
take out the battery as indicated in the pictures below.
When installing the battery, insert the teeth at the top of the
battery into the corresponding notches of the mobile phone,
then press the battery down and secure it by turning the two
screws. Ensure that the battery is safely installed before powering on the phone.
Quick Start
11
6.1.2 Charging the Battery
Put the charging connector to the phone as indicated in the
picture below:
Connect to the charging plug to the socket of the Power Supply.
After charging, take out of the charging connector.
6.1.3 Battery Use
In actual use, the standby time and talk time of the mobile
phone varies with the network status, working environment
and different using manners.
When the power of the battery is lower than normal, the
phone will prompt battery low. Please charge the battery,
otherwise you may lose any files which are not saved. If you
do not charge for a long time, the phone will be powered off
automatically.
When charging, the battery icon at the upper right corner of
the screen will appear in a dynamic rolling manner. When
charging, the battery, mobile phone or charger may become
hot, which is a normal phenomenon.
Loading...