LOFT BED
ASSEMBLY INSTRUCTIONS
SKU FU28TCPC
Weight Limit
250 Lbs
PAGE 1 OF 7
LOFT BED
ASSEMBLY INSTRUCTIONS
SKU FU28TCPC
SAFETY WARNINGS AND GENERAL NOTES
：
1. Follow the information on the warnings on the bunk bed end structure and on the
carton. Do not remove the warning label from the bed.
2. Always use the recommended size mattress or mattress support, or both, to help
prevent the likelihood of entrapment or falls.
3. Do not allow children under 6 years of age to use the upper bunk.
4.Periodically check and ensure the guardrail, ladder and other components are in
their proper position, free from damage, and all connectors are tight.
5. Do not allow horseplay on or under beds.
6. Always prohibit jumping on the bed.
7. Prohibit more than one person on upper bunk.
8. Always use the ladder for entering and leaving the upper bunk.
9. Do not use substitute parts. Contact the manufacturer or dealer for replacement
parts.
10.Use of a night-tight may provide added safely precaution for a child using the
upper bunk.
11. Always use guardrails on both long sides of the upper bunk.
12. If the bunk bed will be placed next to a wall, the guardrail that runs the full
length of the bed should be placed against the wall to prevent entrapment between
the bed and the wall.
The use of water or sleep flotation mattresses is prohibited.
13. STRANGULATION HAZARD- Never attach or hang items to any part of the
bunk bed that are not designed for use with the bed; for example, but not limited to,
hook, belts and jump ropes.
14. Keep these instructions for future reference.
15. We recommend assembling your bunk bed on the shipping carton to protect
your floor or carpet.
16. Be certain all staples are out of the box before beginning assembly on the
shipping carton.
17. USE ONLY MATTRESSES WHICH ARE AS THE TABLE BELOW ON
UPPER BUNKS.
Upper bunk (bunk bed and tribed included)
Bed type Length Width Thickness
Twin 74” – 75” 38½’’ 6’’ max
18. SURFACE OF MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE
UPPER EDGE OF GUARDRAILS.
19. Replacement Parts:
Replacement Parts, including additional guardrails, may be obtained from any of our
dealers
PAGE 2 OF 7
LOFT BED
ASSEMBLY INSTRUCTIONS
SKU FU28TCPC
4
6
1
5
DETAIL VIEW
7
12
19
*
11
9
6
8
2
*
2
3
10
5
PAGE 3 OF 7
1 Post
10
4 Post
LOFT BED
ASSEMBLY INSTRUCTIONS
SKU FU28TCPC
PART LIST
2 Post
End guard rail
5
1PC
1PC
3 Post
6
End guard rail
1PC
2PCS
1PC
2PCS
8
Guard rail
11
Slats
1PC
1PC
9
Side rail
1PC
12
Slats
Screw hole
2PCS
1PC
Hollow
19PCS
B Bolts
8PCS
1/4*60
C Bolts
2PCS
1/4*35
27PCS
HARDWARE LIST
D End cap
1/4*15
8PCS
PAGE 4 OF 7
E End cap
F
Ø42
4PCS
Allen key
20*20
G
Connect wall
1PC
4*59
2 SET
1/4*40
LOFT BED
ASSEMBLY INSTRUCTIONS
SKU FU28TCPC
STEP 1 : Following below illustration Assembly Frame #1.Using hardware #C, #D connect #1 , #4
with #5, #6 to complete Frame #1.
D
4
D
C
C
C
C
5
6
C
C
C
C
1
D
C 8PCS
D 4PCS
1/4*15
Ø42
F 1PC
D
In this step, DO NOT tighten any bolt until you connect all part together.
NOTE
STEP 2 : Following below illustration Assembly Frame #2.Using hardware #C, #D connect #2 , #3
with #5, #6 to complete Frame #2.
:
D
C
C
C
6
C
D
3
2
C
C
5
C
C
C 8PCS
D 4PCS
4*59
1/4*15
NOTE
D
D
:
In this step, DO NOT tighten any bolt until you connect all part together.
PAGE 5 OF 7
Ø42
F 1PC
4*59
LOFT BED
ASSEMBLY INSTRUCTIONS
SKU FU28TCPC
STEP 3 : Following below illustration Assembly Frame #3.
Using hardware #C connect #7, #8 with #11, #12 to complete Frame #3.
7
C
C
8
C
12
*
19
11
2
*
C
C 4PCS
:
NOTE
STEP 4 : Following below illustration Assembly Frame #4.
Using hardware #A, #C connect Frame #1, Frame #2 with Frame #3 & #9 to complete Frame #4.
In this step, DO NOT tighten any bolt until you connect all part together.
C
C
C
A*2
A*2
A*2
A*2
1/4*15
F 1PC
4*59
NOTE
C
C
C
:
In this step, DO NOT tighten any bolt until you connect all part together.
9
PAGE 6 OF 7
C
A 8PCS
C 7PCS
1/4*60
1/4*15
F 1PC
4*59
LOFT BED
ASSEMBLY INSTRUCTIONS
SKU FU28TCPC
STEP 5 : Following below illustration Assembly Frame #5.
Using hardware #B, #E connect Frame #4 with #10 to complete Frame #5.
NOTE
E
B
10
:
In this step, DO NOT tighten any bolt until you connect all part together.
E
E
B
B 2PCS
E 4PCS
E
1/4*35
20*20
F 1PC
4*59
STEP 6 : Following below illustration Assembly Frame #6.
Using hardware #G connect Frame #5 with Wall to complete .
Wall
Wall
G
G
G 2 SET
NOTE: Tighten all step before using. Thank you.
PAGE 7 OF 7
F 1PC
4*59
Loading...