READY
Adult assembly
TRUNDLE BED
ASSEMBLY INSTRUCTIONS
Before assembling your Trundle bed, please read through these
instructions carefully. Familiarize yourself with the different parts.
Allen wrench
PO :
HARDWARE
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
E
A D
BE
CF
JCB M6 X 2 3/8 ”( 60mm ) - 4 pcs
Spare - 1 pc
JCB M6 X 1 3/4”( 45mm ) - 17 pcs
Spare - 2 pcs
JCB M6 X 5/8”( 15mm ) - 6 pcs
Spare - 2 pcs
Fix L bracket to front panel
Barrel nut - 4 pcs
Spare - 1 pc
For JCB M6 X 2”(50mm )
L Bracket - 3 pcs
Allen wrench - 1 pc
Spare - 1 pc
Page 1 of 4
READY
TRUNDLE BED
PARTS LIST
01
02
03
04
HARDWARE 1 BOX 2 PCS
FRONT PANEL
FRONT RAIL
BACK RAIL
1 PC
1 PC
1 PC
05
06
07
08
SIDE CROSS RAIL
CENTER CROSS RAIL
REAR BLOCK
SLAT KIT
1 PC
2 PCS
2 SET
07
05
02
08
06
08
04
07
05
01
Step 1
E
03
Attach the side cross rails (05) and center cross rail (06) to the front and back rail (03)(04), using
L bracket (E), JCB M6 X 1 3/4”(B). Tighten with the Allen wrench (F).
B
B
05
B
E
B
06
B
04
Adult assembly
B
JCB M6 X 1 3/4”
E
L Bracket
03
E
F
B
05
Allen wrench
Page 2 of 4
READY
TRUNDLE BED
Step 2
Attach the front panel (02) to the front rail as shown, using JCB M6 X 5/8” (C).
Tighten with the Allen wrench (F).
C
02
C
C
Adult assembly
C
JCB M6 X 5/8”
F
Allen wrench
Step 3
B
Lay the slat kit (08) onto the rail assembly as shown, using JCB M6 X 1 3/4” (B).
Tighten with the Allen wrench (F).
B
B
08
B
B
B
B
08
B
Adult assembly
B
JCB M6 X 1 3/4”
F
Allen wrench
Page 3 of 4
READY
TRUNDLE BED
Step 4
07
A
Attach the rear block (07) to the back rail as shown. Using JCB M6 X 2 3/8”(A) barrel nut (D),
tighten with the Allen wrench (F)
A
Adult assembly
JCB M6 X 2 3/8”
D
Barrel nut
D
F
07
Allen wrench
A
D
Congratulations!
Your Trundle bed is now ready for use.
We recommend that you periodically check that all screws are tight
and all parts are secure to ensure lasting safety.
Page 4 of 4
Loading...