READY
TO
ASSEMBLE
BED WITH MATCHING FOOTBOARD
ASSEMBLY INSTRUCTIONS
Before assembling your bed, please read through these
instructions carefully and familiarize yourself with the different parts.
PARTS LIST HARDWARE
HEADBOARD PANEL
1
LEFT LEG
2
3
RIGHT LEG
WOOD DOWELS
4
(Factory Installed)
5
FOOTBOARD
Step 1
1 PC
1 PC
1 PC
4 PCS
1 PC
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Attach the legs (2) and (3) to headboard panel (1), using JCB (A) and barrel nut (B).
Tighten with the Allen wrench (C).
Instructions apply for bed sizes
TWIN > TWIN XL > FULLTWIN > TWIN XL > FULL
JCB M6 X 110mm (4 3/8”) - 4 pcs
A
Spare - 1 pc
Barrel nut - 4 pcs
B
Spare - 1 pc
Allen wrench - 1pc
C
Spare - 1pc
A
B
A
1
Adult assembly
B
A
2
B
4
A
3
FRONT VIEW
A
TAPER INSIDE AND
HOLES TO THE FRONT.
B
PO :
Congratulations!
PO :
Your headboard is now assembled.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
Page 1 of 2
READY
TO
ASSEMBLE
01
HARDWARE
BED WITH MATCHING FOOTBOARD
02
HEADBOARD
03
FOOTBOARD
04
SIDE RAILS
Step 1
BOX 1
BOX 2
Adult assembly
Attach the side rails (04) to the headboard (02) and footboard (03) using the bed hook as shown below.
04
02
UPPER
04
03
04
LOWER
Step 2
Use the upper set of pins when
using mattress only, storage drawers
or Trundle bed. Use the lower set of
pins if using foundation and mattress.
Lastly, lay slat kit or foundation support board onto the bed. For assembly, follow the assembly
instructions included with support system.
PLATFORM BED - TALL HEIGHT TRADITIONAL BED - LOW HEIGHT
Adult assembly
Page 2 of 2
Loading...